No video :(

Cub Cadet XT1 Enduro | How to Remove Your Deck / Put it Back On

Подписаться 43 тыс.

Просмотров 89 тыс.

50% 1

This video shows you how to remove the deck from your Cub Cadet XT1 Enduro Series riding lawn mower and how to put it back on. In the video I will demonstrate on my LT46 model lawn tractor, but this will work almost the exact same for LT42 and LT50 models, as well as many others, including the XT2 series.
My “how to” videos for this mower:
How to Change the Blades: • Change Your Riding Law...
How to Level Your Deck: • How to Level Your Cub ...
How to Change the Oil: • Cub Cadet XT1 Enduro |...
Lubrication Points on a Cub Cadet: • Cub Cadet XT1 Enduro -...
Adjust Your Deck Wheels: • How to Set the DECK WH...
2 HACKS to help level your mower deck: • 2 DECK LEVELING HACKS ...
Cleaning Under Deck Belt Covers - Rust Prevention
• Riding Lawn Mower Main...
DISCLAIMER:
Videos produced by Fix It Flip are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and Fix It Flip cannot be held liable if they cause any damage to their homes. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun!

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 192

@michaelloboi1901 Год назад

This is the way ALL how to videos should be done… Can’t thank you enough…. WELL DONE 🛠️

@fixitFlip Год назад

Thank you and glad I could help!

@brads6304 3 месяца назад

Ditto. Just bought a brand spankin new XT1 LT46 today. I'll watch all you videos, thank you sir!

@fixitFlip 3 месяца назад

@@brads6304 No problem! Hope they help you out!

@gailvisger Месяц назад

Thanks very much great video !❤😊

@fixitFlip Месяц назад

@@gailvisger Thank you and no problem!

@Nathan-bo2cx 4 месяца назад

Thank you for all the extra steps you took to make this video. You were obviously so meticulous in that a single step did not go unfilmed (I'm sure that takes time and forethought), the lighting was good, you explained why each step was done, and you were clear and efficient with your instruction. So many how to videos leave out a few small details that can cause just enough confusion to slow down the project for the viewer, but you made this 100% clear, and I appreciate that so much. My 73 year old mother who has the mechanical inclination of a rock could probably pull this off watching your video. Thank you, sir.

@fixitFlip 4 месяца назад

You're welcome and thank you for the kind words! It is a ton of work to get things right where I feel like anybody could follow along. Hopefully it makes somebody's day a little better.

@marlene6848 Год назад

🎉I did it😢😊I did it!! It took me over 3 weeks but i did it!! I stop & started this video over 200 times. One clip took me over a week to remove(I've absolutely NO strength in my hands to grip or at time to remove the bolts.) I let an idiot(cheap labor handyman)use my BRAND NEW Cub Cadet LT46 he bent the blade & broke the belt🤦🏽‍♀️ & the refused to fix it or pay for the repairs. But THANK YOU GOD for yours video. What a blessing & money💰saver. 🎉Now I'm ready for your next Cub Cadet videos.🎉 🎊Thanks for all that you do🙏🏽

@fixitFlip Год назад

Comments like this are what keep me making these videos. So glad to hear I could help! Sorry somebody messed up your mower, but glad you got it taken care of. Those clips can be pretty stubborn, yes! Look in the description under the video and I have links to all my videos on this mower. I have a lot!

@marlene6848 Год назад

@@fixitFlip Yes Sir I definitely will. I feel so inspired when I purchased an impact tool needed to do this🤦🏽‍♀️🤣. I'm so impressed with your work. Thanks again and blessings to you.

@fixitFlip Год назад

@@marlene6848 Thank you for the kind words. An impact is a very handy tool to own. Blessings to you as well! Feel free to ask me questions if more come up!

@CoolBreeze640 18 дней назад

Marlene, your comments are very inspiring to me. I, too, am very pleased that you got the repairs done and by yourself! Congratulations. P.S. You're right, this is a very good video. 👍

@tylerandrew1009 3 месяца назад

Thank you so much for this tutorial! I'm not the most handy person and usually struggle reading a manual. This video made it a breeze. I was able to remove the deck, clean all the grass, install new blades and re-install the deck in about 50 minutes. Subscribed!

@fixitFlip 3 месяца назад

Awesome, great work my man and thanks for the subscribe! Love hearing stories like this.

@user-gp6tf6kw9n Год назад

Thank you so much for this video! I am not at all mechanically inclined and never would have thought I could remove and re-install the mower deck myself, but I successfully did it by following your instructions.

@fixitFlip Год назад

No problem, and that's great! I love hearing when people are successful getting a job done by themselves with my help.

@donrondel8240 Год назад

As a new & 1st time riding mower owner, I find your instructions very helpful. Thanks very much.

@fixitFlip Год назад

No problem. I'll more videos on this mower coming out in the Spring!

@scottburghart9278 Год назад

I want to thank you for this. I have watched numerous vids, incl the factory vid (which showed incorrect info!...must have been a model update or something), and yours was by far the clearest, most concise and professional of the bunch! And I did subscribe. Thanks again!

@fixitFlip Год назад

Thank you for the kind words. That means a lot to me! And thank you for subscribing!

@ChesterCoLife 3 месяца назад

Thank you! Really a fantastic video. There are tons of DIY tutorials and many are confusing, not good video angles, or just wrong. You are an asset to this community. Thanks again for making this 'scary' job as simple to do as it really is. A+++

@fixitFlip 3 месяца назад

Wow, thank you for the kind words! I’m glad I could help!

@gregorgodler9037 13 дней назад

By watching your video I managed to remove the deck to replace the damaged belt. I have an XT3, but it's pretty similar.

@fixitFlip 13 дней назад

Awesome, glad I could help. That's a nice mower!

@BertMan256 5 месяцев назад

Great vid. I have 60 hours on my XT1 and have never changed the blades. I am planning on doing that this weekend. Super helpful!

@fixitFlip 5 месяцев назад

Thanks and glad I could help!

@stevedimattei321 3 месяца назад

Thank you, thank you, thank you! This video was awesome. I would not have been able to put the deck back on my mower without this video.

@fixitFlip 3 месяца назад

No problem, glad I could help!

@MatiasV_PNW 3 месяца назад

BEST instructional video. Thank you so much man!

@fixitFlip 3 месяца назад

No problem, thanks for the compliment!

@jackfarmer8948 2 месяца назад

Bought an XT1 42inch this spring. Yesterday did a number on one of the blades. This tutorial is waaaaay better than the manual. Thanks!

@fixitFlip 2 месяца назад

No problem and Glad it helped!

@clemkadiddlehopper2706 9 месяцев назад

Being a 1st class EXPERT on how to change what should be a 10 minute job into one that takes an hour (or more), I am offended at myself for not being able to "figure this out"! Seriously, I am "mechanically challenged" and your video was such a BIG help to me. Now I know where to turn to when I have a problem with this mower! I really do appreciate you taking the time to produce this video!

@fixitFlip 9 месяцев назад

No problem, I'm glad I could help. These can be a little tricky sometimes. All my videos for this mower are linked below the video in the description and I have many more coming!

@clemkadiddlehopper2706 9 месяцев назад

@@fixitFlip Thank you!

@fixitFlip 9 месяцев назад

No problem. @@clemkadiddlehopper2706

@rchorgan 4 месяца назад

This was very helpful - thank you! Nice and clear, straightforward and explained so anyone can understand.

@fixitFlip 4 месяца назад

No problem. Thanks for the kind words. That's what I try to do!

@michaelpaulmcdaniel8870 Год назад

I rarely comment, but Brother you are Great! Thank you for taking the time to help. Sometimes it's the "simple things" (those clips!) that you know there is a right way and many wrong ways. After watching you and realizing the grip and to pull down as you slide, I had it. First Tractor. Your explanation, camera use and insight is fantastic. Others will learn from you. Please keep your videos coming. Very grateful Sir. I'm going to check out your channel!

@fixitFlip Год назад

Thank you for the kind words. That’s my goal is to help people out and comments like this are what keep me going. Thanks for making my night!

@sableflare 2 года назад

THANK YOU for this video, showing me how easy it is to take the deck off of my mower. Your vid is cut, dry, and to the point. I just got one of these beauts a week ago, and am about to install the mulch plug and blades, and I credit your video with showing how easy removing the deck is, without 4 million optionals to confuse you.

@fixitFlip 2 года назад

Congratulations on getting the Cub! I think you will enjoy. And thank you for the kind words. I try to keep it simple and get to the point to not waste people's time!

@denisemessier2815 2 года назад

You are mechanically gifted. A pleasure to watch. Thank you for sharing your knowledge. Wonderful teacher!

@fixitFlip 2 года назад

Wow, thank you so much again!

@tpr299 10 месяцев назад

Thanks, your video was priceless. The owners manual is worthless. I needed to remove the deck to install a mulching kit.

@fixitFlip 10 месяцев назад

No problem! I hear ya about the manuals!

@markschell4795 Год назад

Thank you for this extremely helpful video. Like several folks said, my biggest struggle was with the cable.

@fixitFlip Год назад

No problem. I like the Civil War hat.

@tpr299 10 месяцев назад

The owners manual said I was supposed to loosen, and remove, an idler wheel bolt, and a screw. I didn’t understand what they were talking about, and using your instructions I didn’t need to.

@fixitFlip 10 месяцев назад

Glad I could help.

@marc7491 Год назад

Without a doubt the best tutorial on the Cub Cadet X1 deck removal and reinstallation. Thanks!!

@fixitFlip Год назад

No problem and thank you for the kind words!

@markplautz6842 Год назад

Got me through repairing the deck on my mower. Thank you

@fixitFlip Год назад

No problem, glad I could help.

@larrypoole3906 Год назад

Got stuck on how to get that PTO cable off. Your vid pulled us through. Thank you.

@fixitFlip Год назад

No problem, glad I could help!

@billchiper9175 Год назад

Great step by step tutorial video. Will definitely be watching for future XT1 videos from you.

@fixitFlip Год назад

Thank you. I just put a new one up on Friday if you want to check it out! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1dIJrqF9VYs.html Several more on my "Lawnmowers" playlist on my channel!

@bon2198 10 месяцев назад

I take mine off every winter and put the plow kit on. Great video.

@fixitFlip 10 месяцев назад

Thanks. I bet that comes in handy big time.

@bon2198 10 месяцев назад

@@fixitFlip definitely

@Art-jl6pt Год назад

Hi I ordered a new lawnmower it came today I noticed a big dents on the more deck I called Home Depot to return product then I watched your video and there’s two big dents on the deck from the manufacture so I had to call Home Depot and cancel the return you save me on a lot of headache thank you

@fixitFlip Год назад

Yes, I remember seeing those for the first time as well and kind of doing a double take. Just the shape of the deck. Glad I saved you some hassle.

@TheDevilguy04 2 месяца назад

Effing awesome thanks for this! Those collar pins are a pain to get off. Not sure how you made it so easy.

@fixitFlip 2 месяца назад

Ha ha, they can be a pain sometimes for sure. Glad to help.

@SaviorInTheSun Год назад

Really appreciate the step by step nature of your video. Super helpful! Thank you!

@fixitFlip Год назад

No problem!

@TLMSHS 8 месяцев назад

Awesome video. Short & sweet. Thanks

@fixitFlip 8 месяцев назад

That's my goal. Straight to the point. Thanks!

@jamestandberg5265 2 года назад

Great video! I appreciate you changing the camera angles to give us a better view. Concise and step by step instructions make it easy to understand and easy to follow. I will follow your instructions. Did you need to level your deck or was it OK from the factory? Thanks again.

@fixitFlip 2 года назад

Thank you! I would check it either way. I got mine from a dealer, and I believe they leveled it, and it was still a little bit off. If you get it from Home Depot, etc, I would definitely check it. But it's more likely to be close to level from a dealer.

@stephensweeney1262 11 месяцев назад

Nice AND clean. To the point video. Thank You.

@fixitFlip 11 месяцев назад

Thank you. That's exactly what I'm shooting for.

@markkenny7184 11 месяцев назад

Perfect. Thank you so much!

@fixitFlip 11 месяцев назад

No problem.

@jackl8133 4 месяца назад

Awesome instructional video! Thank u!!

@fixitFlip 4 месяца назад

No problem and thanks for the kind words!

@bradd009 Год назад

Excellent video. Wish i had started with yours and saved myself some trouble.

@fixitFlip Год назад

Thank you!

@psstoffnow 2 месяца назад

Great video I like to do my own maintenance and this video is definitely a favorite

@fixitFlip 2 месяца назад

Thanks and I’m the same way. Glad I could help.

@rickleger3528 2 года назад

Trick on the bagger unit for this mower, to reduce clogging in the attachment point and tube, clean both, spray on liquid car wax, then buff the tube and attachment piece give it a try, also look at a dranzit hose for easy and safe oil changes. Eliminates accidental opening of the plastic drain fitting stays on mower you control where the oil drains too easy install

@fixitFlip 2 года назад

Good tips! I like the drainzit hoses. I'm not a fan of the plastic Stens valves so I may install a brass nipple in the drain port. If I do, I'll make a video about it. That's what I normally do.

@glennperrine4543 21 день назад

I can’t believe how easy it was to remove and reinstall the mower deck. The only tricky part was to remove and reinstall the power take off cable.

@fixitFlip 20 дней назад

Correct PTO is the trickiest part.

@tonycleary6606 Год назад

Magical video thanks no excess just how to do it correctly

@fixitFlip Год назад

Yessir that's how I like to do it!

@user-pb9lf1mx8i Месяц назад

Excellent video. Thank you sir!

@fixitFlip Месяц назад

Thanks and no problem!

@markshepard8092 2 года назад

Sweet set up flip! You should add a stripe kit!

@fixitFlip 2 года назад

Thanks and you read my mind! Was thinking about doing that exact thing!

@rjhinnj 3 месяца назад

I have an old toro lx500 (2007). That mower deck is 10 times easier to remove! Thank God my cub cadet is the 50” with electric PTO. A little easier.

@fixitFlip 3 месяца назад

Yep, stuff was typically made better back in the day. And yes, electric PTO makes it easier from my experience.

@tedantal Год назад

The removal and reinstall of the PTO Cable for the XT1 is a nightmare as those who have done it know. Took about an hour and a half to remove, clean and reinstall the deck. An hour of that time spent removing and reinstalling the PTO Cable. Just be forewarned. I am a competent mechanic.

@fixitFlip Год назад

Interesting. Did u slide the deck to give it more room like I did in the video?

@ryoder6279 Год назад

…mine came off easily

@kadenen Год назад

I discovered that after the pin was removed, the plastic/rubber that encases the cable just went straight out the hole that it is inserted thru. It does not need to be twisted or forced to go perpendicular. Just pretend that the metal it hooks thru is an O shape, not a C shape. 4:32

@bigfish2544 4 месяца назад

Mine took about 7 minutes to take off. You sure you're competent....😂

@MrThe1234guy 3 месяца назад

And yet this Competent youtuber was able to take Take off the entire deck and reinstall in less than ten minutes. Maybe you should be a youtuber instead.

@508homes 2 года назад

Very detailed step-by-step

@fixitFlip 2 года назад

Thank you!

@annalf1 4 месяца назад

Much appreciated! Thank you!

@fixitFlip 4 месяца назад

You're welcome!

@miketheredleg9821 Год назад

I followed the removal last fall and reinstall this spring. I tried to reinstall from memory, didn't work out so good for me. So rewatched and followed your order, worked great. However One thing I did notice. I wondered when you put on bowtie clip for pto clip, you made it look so easy. Then I realized. On the pto clip there is a hole and a notch. I think the bowtie clip was meant to use the notch for the other side of the bowtie clip to make it more tight and hold more firm. It seems (unless I am wrong) you did not put the bow tie clip so it when on that side and went into notch. I wonder if that could eventually cause an issue. Either way once I followed your steps it went much quicker.

@fixitFlip Год назад

Good catch. I will look closer at that clip next time I have the mower out! It's kind of a blind shot putting it in behind that bracket.

@jasonmcelveen6295 6 месяцев назад

Awesome video

@fixitFlip 6 месяцев назад

Thank you.

@Mr91495osh Год назад

Simplicity mowers have quick release decks. Wishing Cub cadet would check them out

@fixitFlip Год назад

Yeah, that quick hitch system is really neat.

@markrush5013 Месяц назад

l always put my cub on the jack to raise it up to clean and take off blades to sharpen etc..seems simpler than taking the deck off to clean especially since I'm not mechanically inclined.

@fixitFlip Месяц назад

Yep I only take my deck off once a year or so for maintenance. Normally I use my wooden detachable ramps like in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fN5P9DYW6dc.html

@j0e_0n_the_g0 7 месяцев назад

Hey Flip- I like your videos, they are very good! I have the Enduro XT1, 23hp tractor. I might’ve missed this but have you done a training video on installing the traction chains on the rear wheels of this garden tractor? I live in the Midwest and we’re going to be getting a snowstorm here pretty soon and I just put mine on. It might be good to show how those work!

@fixitFlip 7 месяцев назад

I have not but that's a good idea for a future video. Thanks for the kind words!

@microsvc 2 года назад

Nice upgrade!

@fixitFlip 2 года назад

Thank you! Love it so far!

@jaime_fay9370 17 дней назад

Thank you.

@fixitFlip 17 дней назад

No problem.

@alanrogs3990 3 месяца назад

In my opinion the weakest link on this mower is the deck. Granted my yard is rough on mowers but for the length of time I've had my XT-1 with the damage it has accumulated over that time, it is a flimsy mower deck. It is also a pain to keep balanced. Vibrating mowers and screw/nut adjusted balancing doesn't go well together at all. I had Case mowers 20+ years ago that I never had to balance, ever.

@fixitFlip 3 месяца назад

Oh for sure. Definitely a thin, stamped deck. That's one of the things you pay for if you go up to the XT2 is the fabricated deck.

@marlareece-hall4642 Год назад

Thank you so much! Unfortunately, the hardest part for me was getting the PTO cable out of the metal mount on the deck, which yours doesn't have.

@fixitFlip Год назад

Yeah, you have to really pull on those things sometimes!

@Art-jl6pt Год назад

Thank you-my new XT 1 arrives next week -glad I found your instructional videos for my new library.replacing tranny belt and pulleys would be helpful-Where do you order your parts from ?? Got any craftsman LT 1000 transmission rebuild videos?

@fixitFlip Год назад

For my old Troy-bilt I like to get my parts OEM right from the troy-bilt website, especially belts. I can't stand knock-off belts. I have about 20 videos on my old Troy-bilt and I plan on doing a bunch on my Cub Cadet this spring/summer!

@MarcusHardie-pe5cj 4 месяца назад

Hi fix it flip. This is Marcus. I love that Cub cadet. I wonder what happened to that Troy bilt you had.

@fixitFlip 4 месяца назад

Hey Marcus! I sold it after 10 years. It was a great little tractor but I was ready for an upgrade. Bigger deck and more power.

@mikd1420 Год назад

Thank you for your videos

@fixitFlip Год назад

No problem!

@MarkMeadows90 8 дней назад

I wonder if this mower would benefit with three blades instead of two? What do you think?

@rickleger3528 2 года назад

Great video thanks

@fixitFlip 2 года назад

No problem.

@rickleger3528 2 года назад

I have the same mower and I’m looking forward to many more mower videos

@fixitFlip 2 года назад

@@rickleger3528 Awesome, welcome aboard. I've got a couple more on tap soon! Been dealing with an annoying broken toe the last week, so kind of slowed me down a bit.

@fixitFlip 2 года назад

@@rickleger3528 Got another video up about the Cub today. How to level the deck: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KhQZRBT28Po.html

@richardstone5241 Год назад

That noise in the background is an indication of a monitored and recorded call by some unknown authority!

@Mach141 Год назад

Nicely done. 25X better than trying to follow the terrible manual. Why is your deck so clean on top? Mine is full of grass and crud...and i hose it off often, theres just so many springs and belt in the way if never rinses clear.

@fixitFlip Год назад

Thanks for the kind words.

@S.E.C-R Год назад

All these videos make it look so easy… I can’t even get one of the bow tie pins out. Makes me feel like an idiot!

@fixitFlip Год назад

Ha ha, the pins can be a little tricky sometimes. I've banged my knuckles a few times. The trick is grabbing them on the lower side towards the bottom and lifting up at an angle.

@S.E.C-R Год назад

@@fixitFlip Thanks for the reply and tip… I did finally figure it out and got them out. I put gloves on after I scraped my knuckles the first time. Now I can’t get the bolts that hold the blades off. I have the correct tools but they’re just stuck, I got some liquid wrench and soaked them to try again tomorrow. 🤞🏼

@fixitFlip Год назад

@@S.E.C-R Check out my video on how to change a blade. Different mower in this video but I go over a few tricks you can try. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HUPD9z_MUKE.html

@TheNewenglandboys Год назад

So I set my tire pressures, then adjusted the blades side to side at 3” and front to back as per your other video. Then I set the scalping wheels to about a half inch above the floor level. But now I can’t lower my deck any lower than 2 1/2” because the scalping wheels hold it up. What’s your thought??

@fixitFlip Год назад

Totally normal. That’s why I said set the deck where you would normally cut and then adjust the wheels. If you are in New England and cutting cool season grass, you would never want to cut below 2 1/2 inches anyways. Only some warm season grass in the south would want to go below that.

@TheNewenglandboys Год назад

@@fixitFlip Well this has be an exceptionally rainy summer here in NH. Some roads have washed completely out, gardens have been flooded, and the grass has been growing so fast it’s a pain to keep up with. lol. We’re literally mowing any day it’s not raining. I mowed 2 days ago and it’s ready to be mowed again already. We just hope for enough sun to dry it out first. Most of the days is up around 90 degrees and super humid so cutting it a little shorter might give a little more time between mows. But as long as that’s normal for the deck, we’re good.

@fixitFlip Год назад

@@TheNewenglandboys Oh yeah, that's normal. Leaving it a little longer will help keep weeds at bay, but I totally get wanting to whack it down low when it's tough to keep up with!

@unidentifiedbipedallifeform 9 месяцев назад

What do you do with the pto cable if you’re leaving the mower deck off for the winter while you have a snow plow on it? Is it just going to dangle somewhere?

@fixitFlip 9 месяцев назад

I would use a couple zip ties and secure the cable up under the frame somewhere so it’s not dangling in the snow

@tomwiggins1225 11 месяцев назад

You should have done blade removal as well since you had it out anyway.

@fixitFlip 11 месяцев назад

Yeah. I normally don't even remove the deck for that. I will have a video coming out on that though. Here's my video on the topic, just a different mower: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HUPD9z_MUKE.html

@manclt704 Год назад

@fixitFlip Do you need to remove the blade first before removing the deck? I have "Cub Cadet XT1 Enduro LT 46 in. 23 HP V-Twin Kohler 7000 Series Engine Hydrostatic Drive Gas Riding Lawn Tractor" it seems its blade is somehow stuck so when I try to engage PTO the engine stops, as I do not have jacks available to lift this up, do you think the blades can be examined or replaced by your way to remove the deck and easily replace the blade? By the way how many blades are there in this model, I am guessing one, but some videos showing it has got two?

@fixitFlip 11 месяцев назад

You can remove the deck and then change the blades or you can just remove the blades without removing the deck. Here's my video on changing out the blades. Different riding mower but same process: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HUPD9z_MUKE.html

@josephbrian4518 Год назад

That PTO cotter pin has been the biggest pain for me

@fixitFlip Год назад

Yes, it can be. In an awkward spot.

@KeyFobRob 2 года назад

Nice rig

@fixitFlip 2 года назад

Thanks!

@rjnag Год назад

👍

@fixitFlip Год назад

👊🏻

@chuckpeters1 Год назад

Do you know if this is the same procedure for the lt50? The 50 has 3 blades and a fabricated deck.

@fixitFlip Год назад

I've never removed one on a 50, sorry! But I would guess it's very similar.

@Conservativemind929 Месяц назад

I won't drop a deck unless I'm changing belts or painting it,if all your doing is scraping it down or changing blades buy a lift,Harbor Freight has a good one

@fixitFlip Месяц назад

Same here. To do do scraping and changing blades I use my homemade wooden ramps I use in this video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fN5P9DYW6dc.html

@5730201 7 месяцев назад

I'd like a key to this lawnmower. May I ask where to mix it? 0:03 😊

@fixitFlip 7 месяцев назад

Probably need to order from a dealer or cub cadet website.

@timr31908 Год назад

I have that same lawnmower same year very bad quality cut for the cost and the deck vibrates at half throttle everything is been looked into can't be improved on

@fixitFlip Год назад

That's unfortunate. Sorry to hear that. Mine's been striping it up pretty decent. First few seconds of this vid you can see how it's been cutting: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TAVEsobQ5DM.html

@wfarmer39 2 года назад

She’s pretty

@fixitFlip 2 года назад

She's a real beaut, Clark.

@financialadvisor1000 9 месяцев назад

Is it just me or does the deck not seem to be square on the frame?

@fixitFlip 9 месяцев назад

It’s just the oblong shape of it. It does appear to sit at an angle.

@eh5108 Год назад

I have sign in my cub cadet xt1 46 at the lift side of odometer its on and off. do you know what this means please.

@fixitFlip Год назад

I'm not sure I followed that 100% can you rephrase the question. You have an on/off switch by the odometer?

@mmaamm2358 Год назад

I followed this step by step.. but my blades wont engage. Not sure what I did wronf

@fixitFlip Год назад

I would double check the PTO cable/spring. Something's not attached right is what I'm thinking.

@mmaamm2358 Год назад

@@fixitFlip absolutely right, I put the bow tie pin on the wrong side of the bracket. That small amount of space was enough to not trigger blades. Thank you!

@fixitFlip Год назад

@@mmaamm2358 Yep, the littlest thing will do it sometimes. Glad you got it fixed!

@mmaamm2358 Год назад

@@fixitFlip thanks for the help man!

@fixitFlip Год назад

@@mmaamm2358 No problem.

@sissymurphy9620 3 часа назад

I hate those clips I prefer the bar and spring on my 2016 cub cadet easier to take off Mine are both 22 hp v twins one is 42 inch nd other is 2022 I used slip plate to paint the underside of my deck to keep grass from sticking as much . I learned that from myy son who owns a towi company . he uses it on his flatbed tow trucks to make tires from vehicles he tows move easier onto flatbed . 4 coats on each deck I also use extreme blades on my mowers as it cuts the grass finer 2016 two bars in the back pulled out drops the deck down So much easier than those butterfly pins

@emiliovalenti2723 2 года назад

oh no you sold the troy?

@fixitFlip 2 года назад

I’ve still got it! Got a couple more projects I want to do with it.

@suziesturgill2462 Год назад

flip I'm 68 idk that I can do rhat😮

@suziesturgill2462 Год назад

I love your video's ❤

@suziesturgill2462 Год назад

I can do a lot, but idk if can do this!

@suziesturgill2462 Год назад

That's allot 😂

@suziesturgill2462 Год назад

I've learned allot from your videos, I had a 2007 Husqvarna that I love they don't make things that way today😢

@fixitFlip Год назад

@@suziesturgill2462 Yes, riding mower, like everything else, are made a lot cheaper these days, and cost a lot more money!! Hopefully you got it taken care of.