How to Level Your Cub Cadet Lawn Mower Deck | XT1 Enduro Series

Подписаться 42 тыс.

Просмотров 99 тыс.

50% 1

Check out deck leveling gauges here: amzn.to/2wRjc9N
This video will show you how to level the deck on your Cub Cadet riding lawn mower. I demonstrate on my Cub Cadet XT1 Enduro LT 46 Lawn Tractor.
How to Change the Blades: • Change Your Riding Law...
How to Remove the Deck and Put it Back On: • Cub Cadet XT1 Enduro |...
How to Level Your Deck: • How to Level Your Cub ...
How to Change the Oil: • Cub Cadet XT1 Enduro |...
Lubrication Points on a Cub Cadet: • Cub Cadet XT1 Enduro -...
Adjust Your Deck Wheels: • How to Set the DECK WH...
2 HACKS to help level your mower deck: • 2 DECK LEVELING HACKS ...
Cleaning Under Deck Belt Covers - Rust Prevention
• Riding Lawn Mower Main...
DISCLAIMER:
This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I will receive a small commission at no extra cost to you. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
Videos produced by Fix It Flip are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and Fix It Flip cannot be held liable if they cause any damage to their homes, property or person. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun!

Хобби

Опубликовано:

1 авг 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 180

@rickbobrick6573 11 месяцев назад

Stop right here and look no further! Exceptional level of instruction. Clear, concise, and very helpful.

@fixitFlip 11 месяцев назад

Wow, thanks for the kind words, Rick!

@johnsellers9623 2 месяца назад

Simple and straightforward instructions. Thank you very much.

@johnenyart255 День назад

I literally just got done doing this thank you for the help wasn't sure what to do with my mower cutting unevenly. Good as new now. Thank you.

@fixitFlip 22 часа назад

Awesome, glad I could help.

@mikebonilla6913 Год назад

This was the easiest way I’ve ever leveled the deck! Thank you for posting, this!

@fixitFlip Год назад

No problem, glad I could help.

@mattxander12 11 месяцев назад

Mirroring other comments: Your camera angles, explanations, and cadence of talking (without unnecessary info) was just on point. This video is definitely a niche "you don't need to know until you need to know" type of information, but I'm subbing incase I need other spots of info that aren't normally obvious. FWIW, Cub Cadet's instructions are all textual and sorta garbage to someone who hasn't read the manual recently.

@fixitFlip 11 месяцев назад

Thank you very much for the kind words. It means a lot. I have links to all my other videos on this mower copied and pasted in the description below the video if you ever need to check them out.

@ryanrobinson5019 Год назад

I just read the instructions to do this on the Cub Cadet page, but it makes so much more sense when you see it done. Thanks for posting!

@fixitFlip Год назад

No problem, glad I could help.

@user-ne2ol1yd8l 10 дней назад

Very well done sir. This video and instructions are so exact and well presented. Thanks!!

@fixitFlip 7 дней назад

Thank you for the kind words and glad I could help!

@artguess9893 Месяц назад

Thanks for the awesome instructional video I have the lt46 and I'm off five different yards with it I banged it on some tree roots several times on the left side and it started mowing very unevenly. This great video of yours put it right!!

@fixitFlip Месяц назад

No problem, glad I could help!

@barrythomas529 25 дней назад

Wife bought The same mower. 150 feet and folded a blade. I beat it back in shape. Little while later Same thing.. I replaced both blades with heavy duty blades.

@fixitFlip 25 дней назад

@@barrythomas529 Just replaced my blades as well after nailing a pry bar I forgot out in the yard. Doh. Just did a video on that...

@Mr91495osh 11 месяцев назад

I just bought a new Cub LT-1 46 KOHLER 23, love it, a powerful lawn tractor. Didn’t even think of leveling the deck, but like to keep my tools organized so used your technique. All dimensions were spot on. Also, of all the Cub cadet videos, you were the first video that mentioned tire pressures. Mine were 20 front and 16 rear. I made corrections to 14 and 10 and adjusted my cutting height. Thanks, Glenn, Florida

@fixitFlip 11 месяцев назад

No problem, Glenn. Glad you got it all squared away and got the tires where they should be. Happy mowing.

@daniellevasconcellos633 Год назад

Very helpful. Mine comes in on the Aug 12th and I am doing research to ensure I do all the right things with this major purchase I've just made. Appreciate this. :)

@fixitFlip Год назад

Glad I could help. I hope you enjoy your purchase. I've loved mine so far. Doing the correct maintenance will help it last a lot longer. I've got lots more videos planned for it, so stay tuned!

@junkyardDavid 2 месяца назад

Thank you for your guidance. I feel confident in being able to manage this task.

@fixitFlip 2 месяца назад

Great, glad I could help! Good luck with the project.

@dekelsey1 Год назад

I like your video very much. Helped me adjust my deck, and I ended up adjusting it to full height to give my grass a break from cutting it too close. Noted that when you run the adjustments all the way in for max height, your deck lever will only go to 3.5, no longer able to get to 4 or even 3.75. The blade height is now right at about 4-1/8 on my XT1 LT46. I had never adjusted the tilt and now the front edge of the blade is right at 5/16" lower than the back edge. My cutting test, after sharpening the blades, came out beautiful. Thank you "Fix it Flip"!

@fixitFlip Год назад

Very interesting. I try to cut mine pretty long as well. Longer, fuller grass equals less weeds. Glad I could help!

@NickAllgood 6 месяцев назад

G'day from Australia and many thanks for your user friendly video and advice. I also appreciate your advice on tyre pressures. Cheers mate.

@fixitFlip 6 месяцев назад

You got it. Check under the video in the description. I have links to all my videos on this mower if needed. Cheers 👍🏻

@michaelclark9991 9 месяцев назад

The front to back height difference was 4.5”, no amount of blade leveling fixed the problem but after watching your video and adjusting, It’s like having a brand new mower, no more scalping or wildly uneven cuts. Thank you!!!

@fixitFlip 9 месяцев назад

Great, glad I could help!

@ncheelz4life 6 месяцев назад

I’m about to buy a cub tractor and you sir do a great job on all your videos! Thank you

@fixitFlip 6 месяцев назад

Thanks for the kind words. Hope you love the new tractor.

@michaelkennedy1770 9 месяцев назад

Your how-to video was perfectly shot, and explained in detail. It also saved me $200. The store wanted to charge for doing this service before delivery. Wouldn't budge. So I bought the mower elsewhere. Your video helps any guy who's willing and able to do it themselves, and not willing to get robbed for such an easy task. Thank You!

@fixitFlip 9 месяцев назад

$200, that's ridiculous. Not to mention half the time the guys at the store won't actually do it correctly. Glad I could help. Always feels good to get a job down right yourself!

@slipperyblueclay2521 2 месяца назад

This is something they should do automatically with the delivery of a new unit. BTW I bought my XT1 L50 with the fabricated deck from a dealer. The tire pressure was crazy high and the ride was harsh. I adjusted it to 14/10.

@rickleger3528 Год назад

Great Video as usual, very helpful thanks 😊

@fixitFlip Год назад

No problem! Got one coming on how to change the oil soon.

@darrylhubbard931 Год назад

If I may say, this was one informative video! Great job!

@fixitFlip Год назад

Thank you, Darryl!

@john300k Год назад

Great video, keep them coming!!!

@fixitFlip Год назад

Thanks and I will!

@wardscottcpa Месяц назад

Just what I needed. Thanks!

@fixitFlip Месяц назад

You got it!

@KeyFobRob Год назад

Very much appreciated!

@fixitFlip Год назад

Glad I could help!

@kenkan6837 Год назад

Best vid of this type and such a clean machine!

@melonboi186 Год назад

Yeah unfortunately mine isnt clean and there is no way for me to wash it that good

@fixitFlip Год назад

Thank you!

@jcshaves 11 месяцев назад

Thanks this helped a lot. Mine was scalping the lawn and now it is perfect. For left to right it was way easier to adjust the left because there is less in the way.

@fixitFlip 11 месяцев назад

Great, glad you got it squared away!

@morenphi 10 месяцев назад

Nice job with both video and explanation!

@fixitFlip 10 месяцев назад

Thank you!

@Smfmoneoonepointone Год назад

Thank you, sir. My cub cadet needed a major level and height adjustment!

@fixitFlip Год назад

No problem.

@cristinafarmer112 Год назад

That’s a good looking mower 😍

@fixitFlip Год назад

Thanks!

@bethmurrow5626 Год назад

Great video thanks

@fixitFlip Год назад

Thank you and no problem.

@scottsinnett3360 3 месяца назад

FANTASTIC JOB !!! 💪

@fixitFlip 3 месяца назад

Thank you! 👊🏻

@garypic4083 2 месяца назад

Great info Flip thanks

@fixitFlip 2 месяца назад

No problem Gary.

@izzycamaro 7 месяцев назад

Real good video, I like your idea of making your small ruler.

@fixitFlip 7 месяцев назад

Thank you.

@redoakpropertycarellc Год назад

Great video

@fixitFlip Год назад

Thanks!

@jodyjones9244 Месяц назад

Great help awesome video

@fixitFlip Месяц назад

Thanks, glad I could help.

@rogerscottjackson524 2 месяца назад

Excellent. I leanrned at least three important things.

@fixitFlip 2 месяца назад

Awesome!

@stevenhastings1480 7 месяцев назад

Noticed mine was out on the RHS didnt know how to level it always put it off now i know how to do it thanks for the vid

@fixitFlip 7 месяцев назад

No problem, good luck with it. Happy mowing.

@karenbearden6198 Год назад

Thanks! I was concerned about ours (not a Cub) because the front was lower than the back. Never noticed before but we recently had to do some work on it, with the tremendous help of another of your videos, and I noticed it for the first time. Now I know it's supposed to be that way, duh. Makes sense, of course. Thanks, I really appreciate your videos!

@fixitFlip Год назад

No problem and that’s great to hear. Love hearing when my videos help somebody out!

@turdferguson8412 Год назад

Very good how-to video. Good camera shots, clear explanations, no extra fluff. I’ll be leveling my deck tomorrow, thanks! Subscribed

@fixitFlip Год назад

Thanks for the kind words, Turd. Loved your work on Celebrity Jeopardy.

@turdferguson8412 Год назад

@@fixitFlip hahah

@fixitFlip Год назад

@@turdferguson8412 "It's funny cuz it's bigger than a normal hat."

@tonybassi2464 15 дней назад

Tx great video

@fixitFlip 15 дней назад

Thanks and no problem 👊🏻

@melonboi186 Год назад

Thank you

@fixitFlip Год назад

No problem.

@Mr91495osh 11 месяцев назад

Thank you.

@fixitFlip 11 месяцев назад

No problem.

@timr31908 Год назад

Make sure you're more is on flat surface before you adjust and when you tighten the adjusting nuts hold the back nut with a wrench and tighten the top nut against the back not like jamming the nuts together

@fixitFlip Год назад

Yep.

@DanEvans-yb6wk 11 месяцев назад

Thank you! I can do this now. Nice dog.

@fixitFlip 11 месяцев назад

No problem Dan.

@DanEvans-yb6wk 10 месяцев назад

The clamp on the deck was genius and probably the most helpful part of it.

@fixitFlip 10 месяцев назад

Thanks for the kind words and glad it was helpful!@@DanEvans-yb6wk

@unti419 Год назад

Nice video! I've haven't messed with mine yet because it still cuts fine, but nice to know. One thing I would suggest is not use the scalp wheels for even a ball park figure. The flimsy wheel brackets on mine have bent several times and knocked back with a hammer so if these are a little bent, not a good reading. I plan to weld some gussets on them but haven't got around to it.

@fixitFlip Год назад

Good point on the wheel brackets. Thanks for the input!

@martinrhoads6168 2 месяца назад

Very important also, so when you cut your leg off with the mower as you did with your rt leg, the blade will cut it off evenly.

@fixitFlip 2 месяца назад

Exactly. Don't want one nub shorter than the other.

@triathlete39 Месяц назад

Thanks, I was always afraid to do it. the shoot side was a bitch to break lose but the other side was easy Thanks again

@fixitFlip Месяц назад

No problem. Glad you got it done.

@rickjulius6712 4 месяца назад

Loved the simplicity of your instructions. Since my right deck has both wheels off the ground should I assume I have a bent rod? I didn't see the front rod of the deck is bent but didn't know about the rods under the seat. Thank you for that point. If it is the problem can I get these rods on Amazon and what do I ask for?

@fixitFlip 4 месяца назад

Not necessarily. First make sure your deck wheels are set correctly using my video on that topic here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1dIJrqF9VYs.html

@TheNewenglandboys Год назад

Great video and that wood ruler you made is the balls! I had the issue figuring out how to measure the blade on the opposite side of the discharge Shute and this was great! BUT how do you adjust the scalping wheels?

@fixitFlip Год назад

Just did a video on adjusting the scalp wheels! : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1dIJrqF9VYs.html

@fixitFlip Год назад

Also, check out the links in the video description. I put all the links to my videos on this mower down there.

@runnerover 10 месяцев назад

Here’s a tip. you can lift up the mower deck by hand and spin the botton nut on the leveling rods by hand after you loosen the top nut.

@fixitFlip 10 месяцев назад

Ha ha, yep I go over that EXACT thing in my video I did recently about deck leveling hacks: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ax2yU_KajhY.html

@ambulet Год назад

clever little tool for $.04 total cost. Like your thinking....

@fixitFlip Год назад

Thanks. Gotta save where you can these days!

@508homes Год назад

Thanks! Is there a reason you do side to side first?

@fixitFlip Год назад

Nope, you can do either direction first

@12jdevore Год назад

Hi, thank you for your video you're a very good teacher. So I'm wondering why don't you want the pitch two be perfectly even so that the grass would be perfectly even? If the pictures slender down wouldn't your grass be cut in lopsided?

@12jdevore Год назад

LOL let's try this. If your pitch is slanted down wouldn't your grass be cut lopsided?

@fixitFlip Год назад

@@12jdevore Basically think of it this way. You want the blade to cut on the "forward swing" and not the "back swing" on the back of the arc. Only cutting through the grass once makes for a more even cut AND is way less work for the engine. Does that make sense?

@kkobwatchin 11 месяцев назад

Could I use the shroud as measuring points? Great video.

@fixitFlip 11 месяцев назад

Thank you. What do you mean by shroud?

@rosa314pr Год назад

Hello, i was wondering if I j Have to raise the right side higher than the left if I have a bagger on my tractor

@fixitFlip Год назад

I do not believe so, but did the bagger come with a manual? It should say in there if it did.

@willissallee3288 Год назад

Great video! However shouldn't you also set the anti-scalp wheels at the same time? Do you have a video on the proper way to set these wheels?

@fixitFlip Год назад

I do not have a video on that yet but that is a good idea for a spring video.

@fixitFlip Год назад

Just posted a video on the anti-scalp wheels this weekend: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1dIJrqF9VYs.html

@paulbramucci7586 3 месяца назад

I just received my mower,the front adjustment bar ,what hole should the rode be in on front of the deck? Thanks

@fixitFlip 3 месяца назад

Check out the video at about the 9:00 mark. You can see where it attaches.

@henryduke722 2 месяца назад

You're a rideing mowis the same thing as mine but mine's a Craftsman t240

@fixitFlip 2 месяца назад

Oh yeah. A lot of them are VERY similar. Made by MTD, which is now Stanley Black and Decker.

@suziesturgill2462 Год назад

I deck feels wobbly, havent used yet its a 2019 same model

@fixitFlip Год назад

Check out my video on how to remove the deck and put it back on and check if all 3 attachment points are in order. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WW5Ia5hhnuw.html

@otiskeithwatkins1679 10 месяцев назад

Just so you know, those rods are loose in the sleeve. You can simply push up on the deck, set the small nut by hand where you want it and then snug up the outer nut. Of course lowering the deck would require backing the outer nut out to start.

@fixitFlip 10 месяцев назад

Yep. Good catch. I included this in a video I did recently called 2 Deck Leveling Hacks ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ax2yU_KajhY.html

@DrKentVC Год назад

What is the pitch of the thread on the adjust rods? How many turns per inch? If you know that (use a ruler) you can easily figure out how many turns you need to get to your adjustment height.

@fixitFlip Год назад

I do not know the exact numbers, but lately I just hold the deck weight a little with my hand, and then the nut spins freely. I give it a couple spins and measure, until I get it where I want.

@KevinKevin-u1u 13 дней назад

I was just wondering normal for the deck weels hit the ground before you have in the 2 slot

@fixitFlip 13 дней назад

Nope. Check out my video on setting the deck wheels correctly: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1dIJrqF9VYs.htmlsi=OxZkglhe184O11P-

@rickjulius6712 4 месяца назад

Another question for you regarding my cadet. When do I consider getting new belts for it. Both belts are very tight and show no sign of shredding. However, the cadet is running slower and slower, even after putting new plugs in it last summer. The cadet is about 9 yrs. old and has done me well if I can fix it I like to because I don't think I will be leaving her much longer since I am 76, and need to down size. Hope you understand my reasoning?

@fixitFlip 2 месяца назад

If anything, the belts typically stretch out and get looser. I’d say if you don’t see any dry rot or cracking, they are probably fine.

@neild3581 4 месяца назад

I you level the blade at 3” left and right and then drop the front 1/4”-3/8” what is the correct HOC?.

@fixitFlip 4 месяца назад

The HOC will be the lower side of the blade tips in the front because that's what it will cut down to.

@marc7491 Год назад

I purchased a XT 1 last summer. I had put about 20 hours on the tractor. I inadvertently left the key in the "on" position over the winter. Of course this Spring I found two problems. 1. Dead battery. 2. About thirty hours was added to the operating hours meter. The first problem was easily resolve. However, the 2nd issue is a concern. Is there any way to temporarily disconnect the hour meter to eventually reflect the approximate true hours?

@fixitFlip Год назад

I THINK that you can not reset it. Just like a car. Your best bet is probably just documenting how far ahead it is so you can keep track for maintenance, etc.

@marc7491 Год назад

@@fixitFlip My solution was to attempt to temporarily disconnect the hour meter until I put the 30 hours on it and then reconnect it. I just can't figure out how to get to it thru the panel? But you're probably right! I'll just subtract 30 hours from the readout.

@stoneyswolf 11 месяцев назад

That would drive me nuts that extra 30 hours I'd have a Ferris Bueller's day off happening.

@seanbaker1818 8 месяцев назад

I raised the right side a lot from the facility height to get the blade to 4 inches, once I raised the left side so the deck was level both side the blade was at 3 and 3/4 inches so idk

@fixitFlip 8 месяцев назад

Yeah, sometimes it takes going back and forth a several times to get it at the right height AND level. Sometimes it takes more than several times.

@ghettostreamlabs5724 2 месяца назад

What causes a strip of (what looks like) uncut grass right in the middles of the deck? Usually about an inch or two wide.

@fixitFlip 2 месяца назад

Normally just worn or uneven blades. I would try sharpening blades or replacing them. I'll have a video on this soon.

@ghettostreamlabs5724 2 месяца назад

@@fixitFlip I used your vids to drop the deck and replace the blades yesterday. Seems to have rectified the issue. One of the old blades was severely worn on one end, while the others were worn "normal". Must have hit something at some point.

@fixitFlip 2 месяца назад

@@ghettostreamlabs5724 Yep, that will definitely do it. Glad you got it figured out.

@normajdennis 2 месяца назад

Okay, I've got a question about the LT, GT, and SLT markings on the front deck roller. What do those mean?

@fixitFlip 2 месяца назад

off the top of my head I know LT is lawn tractor, GT is probably garden tractor, not sure about SLT.

@normajdennis 2 месяца назад

@@fixitFlip ooo That makes sense! Thanks!!

@fixitFlip 2 месяца назад

@@normajdennis No problem.

@ChantelBartges Год назад

I just got one with 133 hours for $800. Is that a good deal

@fixitFlip Год назад

Yeah that's not a bad deal. As long as the deck isn't all beat up or something. They are going for about $2400 now and hold their value pretty decent.

@PunjabiBall3r Год назад

Can I do this to make the deck higher? I like my grass cut high.

@fixitFlip Год назад

Sure, you can adjust all three adjustment points up and raise the whole thing.

@PunjabiBall3r Год назад

@@fixitFlip Thanks will try tomorrow!

@dtkp33355 Месяц назад

Problem is: I do not have any firm, level ground on my entire property. Is there any other way to do this?

@fixitFlip Месяц назад

That's a tricky one. Let me think about that a bit.

@suziesturgill2462 Год назад

And my discharge sur rubbing right on the scalping wheel

@fixitFlip Год назад

Check my video on taking off the deck. See if it’s attached right.

@ChrisTKelley Год назад

I bought a new XT2, and the measurement at the front of the deck is about 2-3/8” when set to the 3 position. Would you agree that I should raise my entire deck? I guess I thought the 3 position was supposed to mean 3”, but I’m not even close.

@fixitFlip Год назад

What's it measure at the tip of the blade? Front should sit a little lower. 3 should mean 3", correct.

@ChrisTKelley Год назад

@@fixitFlip when set to 3, it measures 2-3/8" at the tip of the blade at the front when the blade is parallel with the mower. I bought it from a dealer, you'd think they would have set and leveled the deck correctly, but it appears really low.

@fixitFlip Год назад

@@ChrisTKelley You would think they would set it. But I'm actually not surprised when they are not. Hard to find good help these days. If you turn the lower nuts clockwise on both sides, you can raise the deck up to the proper height so it lines up with the measurements.

@jerrybushey6654 Месяц назад

I just got a lt50 and I can’t raise it all the way up it’s 2 notches short is this typical or is something wrong ?

@fixitFlip Месяц назад

Check out my video about deck hacks and see if that helps. It should go up all the way: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ax2yU_KajhY.html

@jerrybushey6654 Месяц назад

@@fixitFlip the deck is hitting the frame so it can’t go up anymore and it’s on 3 1/2

@fixitFlip Месяц назад

@@jerrybushey6654 That's definitely not normal. Have tried the adjustments in the video to see if it's sitting lopsided or something?

@jerrybushey6654 Месяц назад

It’s straight and seems level cuts fine

@jerrybushey6654 Месяц назад

@@fixitFlip I fixed it myself a local Cub cadet tech told me they ship them like that on the pallet and you have to adjust them I wish I knew that when it was delivered and don’t remember seeing that in the manual

@coffeekhan Год назад

Great video! The instructions are poorly written and poorly illustrated! I also really like your suggestion of making the improvised ruler. Great idea!!

@fixitFlip Год назад

Thank you!

@timr31908 10 месяцев назад

I have that same mower and I'd say the quality of cut has a lot to be desired . the blades bend really easy their garbage.. , come on MTd get your s*** together😊

@fixitFlip 10 месяцев назад

I think they are called Stanley Black and Decker now but I hear ya.

@wfulksdotcom 10 месяцев назад

Great video. I need to adjust mine before I cut again.

@fixitFlip 10 месяцев назад

Thanks. Good luck with it.

@marunio1 11 месяцев назад

Hi. I always been wrong . I setup front blade ,a 1/4-3/8 of the inch higher then rear one. Thanks for tutor. What is metod to ajust deck wheels?

@fixitFlip 11 месяцев назад

No problem. Here's my video on how to set the deck wheels: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1dIJrqF9VYs.html

@palmettokid54 Год назад

Use a simple cheap circle drawing compass, like an inside machinist compass. Set distance from blade to ground, remove and measure, static.turbosquid.com/Preview/2014/07/11__16_24_14/DraftingCompassWithPencil_147.jpga0c13048-325d-48a4-8460-87ce2dee818fDefaultHQ.jpg

@fixitFlip Год назад

Smart little trick there!