Cura Questions -Adding a purge line in g-code to clear your nozzle before printing

Подписаться 28 тыс.

Просмотров 13 тыс.

50% 1

as promiosed heres the start gcode for a purge line!
G92 E0 ; Reset Extruder
G28 ; Home all axes
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
Join WEBULL TODAY! and get free stocks! all while helping the channel grow! its a win/win!
a.webull.com/H...
Like and Subscribe!
check out these other cool channels!
Technivorous plays: / @technivorousplays8282
sci-fi and fantasy: / @sci-fiandfantasywitht...
3 party system: / @3partysystem496
Find 3dprinters and other cool Tech at:
www.amazon.com...
SUPPORT TECHNIVOROUS 3D Printing:
TeeSpring Technivorous Merch!
teespring.com/...
become a channel member for youtube perks!
/ @technivorous
Paypal: Vanethrane@gmail.com
Check out my Patreon page: / technivorous
or you can buy me a coffee: www.buymeacoff....
Send me a gwei! (ether address, all donations accepted!)
0xfFB33D2Af25909eB92dF5Da6236b69c4AFBaC692
send me a satoshi! (bitcoin address, all donations accepted!)
0xfFB33D2Af25909eB92dF5Da6236b69c4AFBaC692
Current Channel Goal: 25,000 Subs!

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@charlesvrogers Год назад

Hi, how move the purge line to the front of the build plate. From left to right?

@runescapeR4evR 11 месяцев назад

i Also have the same question the side interrupts too many prints

@six1free Год назад

Having a hard time with my ender 3v2.... it works fine if I manually push fillament, as well for about 1min after but then seems to dry up and I have to manually push to fill the significant missing section again

@six1free Год назад

whoever liked that thanks for recalling me, update: I replaced the entire hot end with the direct drive kit and once I was finally brave enough to remove the bowden tube sure enough heat-creaped and one roll of PLA later I'm noticing heatcreap already :( damn salesman toled me it was a full metal hotend (outside only!!!)

@mamadoubapassioninformatique Год назад

Hey it's been a very long time. Where have you bee hiding?

@3rdeyeopen974 Год назад

I'm around just busy. I took a job at a farm growing medical marijuana so it's been hectic but I'm still here!

@mrrcomp 5 месяцев назад

Great Video .for newbies like me ... I do have question on the purge as opposed to the actual print. When i slice and print an object the purge line works fine but then the actual print doesn't manage to stick to the bed and just clamps around the nozzle. Any suggestions??

@RedstoneWizard1983 6 месяцев назад

thank you i just got into printing. i thought that some had the purge line in it automatically. so now all my prints will come out without to many issues due to the extra material.

@emperorkalel 6 месяцев назад

How can I remove that purge line I don't have the same codes as you. No start fors line or second

@mamatuja Год назад

Do you have a 3-D printer? Or you just talk about 3-D printing?

@1937Brett Год назад

Iv been struggling with little lines on my prints got to a good point but got told to check to see if it does a nozzle prime before each layer how would I do this

@A2ZGeek 11 месяцев назад

Hey Thanks for this, how would I go about adding two more lines? Need a little more purge out of mine.

@BellaNestCam 11 месяцев назад

You will want to make sure I did the x-axis numbers correctly, but just copy and paste the first two lines that draw the first line and modify the x-axis position: G1 X0.9 Y20 Z0.3 F5000.0 ; Move to third start position G1 X0.9 Y200.0 Z0.3 F1500.0 E15 ; Draw the third line

@Onceuponajuan 3 месяца назад

you are the best thanks!

@samanthabott9020 Год назад

I just got a ender 3 pro and put it together, changed nothing with the cura settings and everything looks how it should but it keeps printing everything along the left edge of the bed and will not print in the center of the bed. Please help! And the origin at center is not checked.