Тёмный

Custom AN Fitting Fuel Lines for EK Civic with H22A 

Garage SpeCivic
Подписаться 17 тыс.
Просмотров 13 тыс.
50% 1

This week has been slow, but at the same time very exciting as i want to thank all of you, the viewers and subscribers for helping me get to 1000 subs. Truly means alot and i want to thank you all for the support you have shown. Jumping into whats going on in this episode, i dealt with many delays on shipments and even shipment errors. Luckily suppliers made some magic happen and i got my parts. The main focus is the custom AN fitting fuel lines for the EK Civic, i got them off amazon which is the link below
www.amazon.ca/EVIL-ENERGY-Nyl...
Also i purchased up some additional fittings to complete the whole fuel system from the fuel tank to the fuel filter from the fuel filter to the fuel rail. These are those parts too.
Quick connect : www.amazon.ca/gp/product/B001...
Adapter 6an to 14mm 1.5:
www.amazon.ca/Russell-Edelbro...
6an banjo:
www.jegs.com/i/Russell/799/64...
These guys pretty much complete the whole system for well under 200 dollars. You can purchase a new fuel filter withen that cost too. Still some can say its a little pricey compared to running a solid steel line but the amount of stress those things cause when making them and dealing with rust problems i dont want to be a part of. Ive seen enough rust. Plus this is perfect for the future if we run some upgrades.
Some 99-00 si parking brake cables came too, late but they made it.
Thanks again for watching!

Авто/Мото

Опубликовано:

 

3 мар 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 23   
@chrisgrigg32
@chrisgrigg32 4 года назад
Nice work 👍
@creambuilt
@creambuilt 5 лет назад
1k already? Congrats!@
@Namesi
@Namesi 5 лет назад
Don't worry about getting out content rapid-fire; the quality is worth the wait and doing this whole project out of your own back pocket is more relatable to most people I'm sure. On a pettier note, kinda wish you had plumbed that fuel line behind or underneath the intake manifold, but that would be purely an aesthetic thing and also would make access more difficult so I get it. Keep up the awesome work and take your time! Cheers!
@GarageSpeCivic
@GarageSpeCivic 5 лет назад
If it was longer that would have been the route I would have gone. Unfortunately my guesstimation on hose length wasn't as good as I thought. Thanks for the feedback!
@uptownfishing2244
@uptownfishing2244 4 года назад
Are your banjo bolts the same size on both ends for that fuel line?
@PATuners
@PATuners 5 лет назад
nice 1k i'm close to 1k as well
@hunterking6248
@hunterking6248 2 года назад
Will thr an6 fuel kit fir civic d / b work fir the h22a
@treymunnings8887
@treymunnings8887 2 года назад
What ecu did u use for the swap
@mmmvtec90
@mmmvtec90 3 года назад
Hey buddy do you have an email or something I could email you to ask a few questions? I’m doing the same swap just built internals and turbod. I appreciate and love your videos. Don’t change
@ashleylunan
@ashleylunan 2 года назад
Long shot but what was the size of the quick release connector
@GarageSpeCivic
@GarageSpeCivic 2 года назад
-6 an Male to 5/16" SAE Quick-Disconnect Female, there is a amazon link in my video description for the quick release
@MrXeszive
@MrXeszive 4 года назад
You forgot a part # or link for one of the fittings, it’s the one that went on the fuel rail side, by any chance do you still have that information?
@MrXeszive
@MrXeszive 4 года назад
Found the part number that you were missing in the description for the banjo bolt, it is 640700 just Incase someone is wondering
@s1zperformance765
@s1zperformance765 4 года назад
@@MrXeszive thanks bud 👍
@Bigboinkies
@Bigboinkies 4 года назад
I swapped with a accord fuel rail so that I can have the banjo bolt on the passenger side instead of the driver side.
@ae86miami1
@ae86miami1 2 года назад
What year accord
@Bigboinkies
@Bigboinkies 2 года назад
@@ae86miami1 94-97
@Bigboinkies
@Bigboinkies 2 года назад
I dont remember if it was the vtec or non vtec. But I think it may have vtec in closer memory.
@peryco3324
@peryco3324 4 года назад
Is there any way I can contact you and talk about your swap? I have a h23a inside a 1999 Acura integra gsr and i need some help on it
@GarageSpeCivic
@GarageSpeCivic 4 года назад
Dm on Instagram
@stickshiftelitist5683
@stickshiftelitist5683 5 лет назад
You got a patreon?
@nelc2399
@nelc2399 4 года назад
Wonder why don't plant a k engine instead of a b series Edit: or is a h engine he using right there
@GarageSpeCivic
@GarageSpeCivic 4 года назад
H series. Boostedboiz inspiration
Далее
Старый Дим Димыч вернулся😱
00:16
ПОДВОДНЫЙ ГЕЙМИНГ #shorts
00:22
Просмотров 1,1 млн
QVZ PREMYER LIGA
00:18
Просмотров 1,2 млн
Aftermarket H22 Fuel Rail On H2B Turbo CRX
24:37
Просмотров 13 тыс.
Modifying the EK Harness to the H22 Harness
18:26
Просмотров 17 тыс.
K-Swap Fuel Systems Explained
10:30
Просмотров 10 тыс.
Civic Fuel Line Upgrade! DIY Ethanol Safe 6an!
12:01
Просмотров 29 тыс.
How to Hardwire Your Fuel Pump With A Relay
9:11
Просмотров 15 тыс.
JBtuned B/D Series Tucked Fuel Line Install
16:05
Просмотров 24 тыс.
Complete FlexFuel e85 Fuel System Install
58:40
Просмотров 21 тыс.
РЕЗКА РЕЗИНЫ ДЛЯ ШИН
0:40
Просмотров 7 млн