CUSTOM DYNAMICS LED PROBEAM FILLERZ INSTALLED ON MY 2019 ROAD GLIDE SPECIAL! *CLEAN INSTALL* 

Build is coming along nicely. Awesome job!

Love the videos. Looks great.

Looks great dude! Love this look. Definitely giving me ideas for my next bike 🤔

Well there you go again another great how to video making your bike look Different for a new season of riding nice job

You make it easy for us older guys trying to spice our RG 😁👍

That was a great install video!

Another great video 👍🏽

Very helpful, thanks for sharing!

Looks good bro 💪🏾💪🏾💪🏾

Beautiful looks really good 👍

Man that’s a killer look

Love this set up!

I like Ciro lighting for the filler panel better because it covers the bottom where the galvanized bolts are left and right . All in all the bike looks great

Awesome, and love the links to the products. Been looking for this set up.

I like this set-up

I’ve been eyeballing that license plate mount for my Street Glide. That looks great!

I just got a 2022 RG special and have ordered standard bags as well as a 2 into 1 exhaust. I have all of the custom dynamics stuff for the rear waiting to go on including a mini tail light. Thanks for posting this video as it was extremely helpful.

I just did the same pro beam light and license plate from custom dynamics for my CVO. Lookes Killer Can’t wait to see what’s next.

Well done!!

The slow creep to full-on performance Bagger is on. You’ve taken a slice from Moto America or been watching too much M. Bertini. Whatever. Always thoughtful clean choices in your renderings. Nice Doo.

I just picked up my new Road Glide ST and I ordered this kit super pumped! Cool vid

Looks great

Good job on getting rid of the tri bar. I've got a 2020 road Glide, The first thing I did was get rid of the stretch bags. Now you have inspired me to get rid of my tri bar And go with the custom dynamic lights.

Looks great! Very clean. I have a 22 SG ST, it has the tailight and light bar, so have been looking for a way to eliminate the light bar and replace the turn signals. Thanks.

NICE WORK!!

Lookin sharp !

Everything black and smoked looks Great When you put the tape on use a tie wrap around the tape or it will come off in time. 👍

Dope ! Just did this on mine wish I would have seen your video struggled a bit with the white/black for the plate on a good way to splice it in

super sick. clean look, i did an electra glide fender with a Moons Mc LED light and curved plate holder. i kinda like your way better.. haven't seen that out here yet..

I'm doing the same thing tomorrow. Can't wait. I think some Santoro crash bars and a stainless pipe would set your bike off.

Brother, love this upgrade!! Definitely smoothes out the back for a slick look! Outstanding 👌

I’ve had them since 2020 Sturgis, glad I got them. Are the ohlins suspension really worth it?

🔥🔥🔥

What did you did with the existing wire that was connected to the tribar harness??

Nice.

Great Job but have a question. It your previous video you got rid of tribal light and installed that jumper harness. Where you went to the filler lights do you still need to run that jumper harness? looked light the whole factory harness that goes down there is no longer needed

And the bag lights for more rear end safety to be seen more

Can you use these parts only to delete the tri bar as well or do i need the tri bar delete plugs?

WHATTTTTT. YOUR DRIVING A TRAIL BOSS.

Nice

You would think they would have a plug port on a twilight to plug in he plate light or something where you don’t have to hack up a new set of lights

Did you have to use the stabiliser for this?

I noticed you didn't have a brake light on top of your turn signal bracket. Mine does. Will the plate frame cover up the hole that is used to mount my factory brake light as well or just the turn signal bracket?

How easy would it be to remove these purchased a 16RK with chrome Smoked fillerz and I don't like them want to remove them.

If I have filler lights from factory, does the splice still work the same? Unfortunately on my 23 RGST it has the center light, the bar, and fillers from factory. Trying to remove the bar and figure out if I can splice into factory fillers.

Im a little late to the party on this one, but liked the video. Did that filler lights get rid of the plug that you used for the lasy video on the tribar light? Sounds like that entire wire set is not used now.

❤‍🔥

What’s the part number for the turn signal eliminator bracket?

Hey bro love the vids. I was wondering what you do with all those black factory parts you take off your bike. I was wondering if I might be able to buy them from you for my 2022 road glide standard. I’m trying to black out my bike with some parts slowly. I’m interested in the rear tail lights you took off and the floor boards and the black crash bar. Thanks

Good look, however splicing wires is a thing of the past. Ciro makes this product without cutting wires. Still looks good and good install.

Great looking lights! my only concern is, they might me be a little too recessed behind the bags from a side view making it hard for drivers changing lanes to see you braking.

Looks good, just not a fan of 1 pipe on the back of a bagger, I took off mine when I got it, switched to Reinhardts…

Looks great. Are you going to keep the full length exhaust or do a mid length?

Can you run those custom dynamics lights with the stock tail lights?

What type of lift / jack are you using to raise your Road Glide off the floor? Great vids BTW!

Did you still need the Tribar adapter connected to work the lights?

Looks awesome. Are you going to put a shorter muffler?

did you remove the input wire that came from the main harness to the back ? And used the supplied one by custom dynamics one?

Where did you get that carbon license plate bracket?

I just bought the filler lights for my road glide. I already deleted the tri bar I’m very confused because the guy at the shop was telling me I need all kinds of harnesses. Do I need to delete the license plate? do the filler lights have all the wiring I need I already bought the TRI delete harness adapter

What did u wind up doing with the tri bar eliminator harness?

How the hell did you get the three bolts on the left and right side of the rear fender off off mine are stuck to a backing plate

I have a 22 road glide st.. thus won’t work fir it right?? I called custom dynamics Abc grey said they don’t make a kit yet.. I want to get rid of my tail light

Help! I installed mine and I don’t have any brake out of it… I still have the stock brake light on the back of my ST

If you had t bars our bikes would be so similar

Did you splice into the splitter that the filler lights come with ?

Is there anyway of installing those without removing the tri-bar ?

Will these fit a 2019 Streetglide standard if I delete tribar and filler panel?

Did u still need the tribar light delete harness with doing the filler lights? And deleting the stock light entirely?

So what did you with your TRI BAR Eliminator harness?

where did you find the standard bags

That makes two of us (re: I'm stoked too!). Looks awesome; clever! I watched your previous video and was wondering what you would come up with to fill in the elongated openings that were visible once the Tri-Bar piece was eliminated. Again, looks darn nice. Good job. Thanks for making this video. PS: Front fender? IMO, the stock front fender from a 2022 RG-ST/SG-ST (in black) would complete the Performance Bagger look. Earlier today, I ordered the HD colored-matched (Snake Venom) wrapped fender (19") for my '21RGS. Tom M., Hawthorne Ca. '21RGS & '22FXLRS

What license plate frame is that? Just got my bike back, they changed the fender to a lower profile version but I have no holes for license plate frame or anywhere to add a license plate

What did u do with antenna

I’m copying you and doing the exact same light setup in the rear. Lol my only question is what did you do with the radio antenna?

Anthony, you removed the entire stock rear harness given the full delete and therefore the supplied Custom Dynamics splitter has an open end, correct?

Will this work on a 2016

what bars are those?

Where did you get your shocks??

Fucking sick

White is power and black is ground...? You sure about that?

How are yoy liking those bars after all this time?

Are the indicators amber or red?

The lights look great, but I really would have liked to see a the wiring for the LED plate light. I learn better with visual, rather tgan descriptive.

Good stuff! Are you connected with Amsoil Adam here?! He’d love your content.

Don't like the regular bags. Stretched bags were a selling point for my 2019.

Just can’t like looks of I muffler on touring bikes sorry