Harley Davidson Makeover | Custom Dynamics

Просмотров 10 тыс.

% 293

In this video, I show you how to do a complete rear lighting Harley Davidson Makeover using Custom Dynamics LED lighting. The Harley Davidson touring motorcycles lighting is sufficient to meet DOT standards, however, in my opinion, at a minimum the rear lighting should be upgraded with Custom Dynamics plug and play LED products. I will show you how to install several rear lighting options offered my Custom Dynamics for the touring motorcycles. @customdynamics
Check out all the Custom Dynamics Products
www.customdynamics.com
Tell them HDVIBE sent you!
Links to Products used in this video:
Magic Strobe
www.customdynamics.com/magic-strobes-brake-light-flasher-for-harley-davidson-touring?cat=2
Filler Lights
www.customdynamics.com/probeam-fillerz?cat=2
Fillerz Eclipse Module
www.customdynamics.com/probeam-eclipze?cat=2
Turn Signal Eliminator Kit
www.customdynamics.com/turn-signal-eliminator-kit-for-touring?cat=2
Probeam Low Profile Taillight
www.customdynamics.com/probeam-low-profile-led-taillight?cat=2
Low Profile Sequential Saddlebag Lights
www.customdynamics.com/low-profile-motorcycle-saddle-bag-lights-bcm
Chapters
00:00 Intro
00:30 Stock Set Up
01:46 Remove Reflectors
03:46 Magic Strobe
06:05 Filler Light Install
09:24 Turn Signal Eliminator Install
14:19 Rear Low Profile Light Install
17:14 Low Profile Sequential Bagz
17:29 Check it Out
17:56 Before & After
18:53 Like, Share, Subscribe and Comment Below
#harleydavidson #customdynamics #roadglide #streetglide #indian #probeam #bagger #usa #ledlights #harleyled

Авто/Мото

Опубликовано:

6 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@HDVIBE Год назад

The rear lighting on the Harley Davidson touring bikes obviously meets the minimum DOT requirements, but, I don't feel safe with the stock set up. Check out this week's video as I show you how I transformed the rear lighting set up on the Street Glide ST with several Custom Dynamics products to dramatically improve visibility day or night. Many of the products featured in this video including the installation process and final result are available for many of the Harley Davidson Touring motorcycles. For links to all the products featured in this video, check out the video description. Thanks for watching and if you haven't yet subscribed to the channel, I would be honored if you would check it out and consider hitting that subscribe icon. Ride safe and enjoy. Rick HDVIBE

@mryates12000 11 месяцев назад

@hdvibe how did you mount the license plate frame after you removed the bullet light assembly? Was there holes in the fender for you to install the plate frame? If so, what license plate frame did you go with?

@HDVIBE 11 месяцев назад

@mryates12000 There are holes in the fender where the original lighting was removed. The turn signal eliminator bracket mounts right back into those same holes using the supplied bolts. The license plate outer frame with the LED is part of the kit as well. It just screws into the other eliminator bracket with the supplied screws. If you look at the description section I have links to all the products used in this video. All are available through Custom Dynamics. If you are already a subscriber...thank you. If you haven't yet subscribed I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

@adrianoflaherty4855 3 месяца назад

I’ll be using this harness on my rtl-m install.

@HDVIBE 3 месяца назад

Thanks for watching and commenting. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👍👊

@bderryberry4987 Год назад

I've had 6 Touring bikes and all have had Custom Dynamics added for beauty and safety. Good Video!

@HDVIBE Год назад

Thanks for watching and commenting. Generally you can't go wrong with Custom Dynamics products. If you are already a subscriber thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

@oldbikenewman Год назад

The Custom Dynamics lighting makes a big difference. Thanks for sharing. Godspeed

@HDVIBE Год назад

Thanks for watching and commenting. I appreciate your continued support to the channel. Ride safe and enjoy. 👊✌️👍

@kellybgliding Год назад

Nothing like Custom Dynamics. I love there lights.

@HDVIBE Год назад

Thanks for watching and commenting. I appreciate your support to the channel. Ride safe and enjoy. 👊✌️👍

@alanwagers7073 3 месяца назад

Great stuff, and wow what a difference, just got a 2016 freewheeler Saturday. Looking for led upgrade. Thanks for sharing

@HDVIBE 3 месяца назад

Thanks Alan for watching and commenting. I appreciate your kind words. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

@kevinsheehan3451 6 месяцев назад

FYI, wd40 works the same as 3m adhesive remover and we all have wd40 on the bench. Did my 17 sg with custom dynamics to the rear, looks great and lots of compliments..

@HDVIBE 6 месяцев назад

Thanks Kevin for watching, commenting and the suggestion. You definitely can't go wrong with Custom Dynamics. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

@602North Год назад

Looks so good. I love my Custom Dynamics bag lights and strobe. Easy to install, plug and play.

@HDVIBE Год назад

Thanks RJ for watching and commenting. I appreciate your support. Ride safe and enjoy. 👊✌️👍

@WindyTherapy Год назад

Great upgrade Rick ! The install explanation was clear and well done. The difference is evident. Cheers amigo

@HDVIBE Год назад

Thanks Eddie for watching and commenting. Much appreciated. Ride safe and enjoy. ✌️👍👊

@jasonbreedlove495 Год назад

Awesome install! The ST is looking good. Have a great ride!

@HDVIBE Год назад

Thanks Jason for watching and commenting. I appreciate your continued support. Ride safe and enjoy. ✌️👊👍

@isnull_or_empty 4 месяца назад

Solid video. Will come in handy when I do the same for my '23 Road Glide ST.

@HDVIBE 4 месяца назад

@scottlin777 7 месяцев назад

what a vast improvement

@HDVIBE 7 месяцев назад

Yes...in my opinion, these upgrades are necessary to feel safe on the road day or night. 👊✌️👍

@2147crew Год назад

They look great!

@HDVIBE Год назад

Thanks for checking it out. Ride safe and enjoy. ✌️👍👊

@Darrells.. Год назад

Wished HD would have used the cvo style fender with filler light styling on the ST,and forgot about the saddlebag reflectors,looks great 👍👍

@HDVIBE Год назад

Thanks Darrell for watching and commenting. Those reflectors are ugly snd pretty much useless. Thanks for your support and ride safe. 👊✌️👍

@marcot-mrk7178 6 месяцев назад

Importan Make sure don’t spray the adhesive remover on any plastic , In my case I did it with the new lenses installed

@HDVIBE 6 месяцев назад

Thanks for watching and for the tip. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

@breezetelemaster1368 Год назад

Great Job!

@HDVIBE Год назад

Thanks for watching and commenting. I appreciate the kind words. If you are already a subscriber thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

@Jeff62-uo1kn 9 месяцев назад

Safer and looks great, just got a Road Glide ST same color, thanks for video.

@HDVIBE 9 месяцев назад

Thanks Jeff for watching and commenting. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

@larry68hd11 Год назад

Great job

@HDVIBE Год назад

Thanks Larry for watching and commenting. Ride safe and enjoy. 👊✌️👍

@hd_av_traveler1495 Год назад

awesome video as always

@HDVIBE Год назад

Thanks for watching and commenting. I appreciate your continued support. Ride safe and enjoy. ✌️👍👊

@Flybyhelo 8 месяцев назад

I subscribed... Love these lights.

@HDVIBE 8 месяцев назад

Thanks Fred for watching and subscribing to the channel. You definitely can't go wrong with Custom Dynamics LED Lighting. I look forward to seeing your comments on other and future videos. Thanks for your support and ride safe. ✌️👊👍

@RidersUnited 11 месяцев назад

That looks so much nicer without this bullet turn signals so much cleaner. I wish they have this big lamp on RKS I think it is safer due to size

@HDVIBE 11 месяцев назад

Thanks Art. I like the look much better now and wow it's bright. A few more to add then lighting will be complete. Ride safe and enjoy. ✌️👍👊

@marco-tiopet4020 11 месяцев назад

👍✌

@HDVIBE 11 месяцев назад

👍

@DeterminedVeteran Год назад

Bike is looking good bud

@HDVIBE Год назад

Thanks Jack for watching and commenting. Much appreciated. Ride safe and enjoy. 👊✌️👍

@charlesvan9726 6 месяцев назад

Nice video, but why didn't you use the rear light with bottom window for your license plate? is a lot easier and works fine. oh by the way the bolts come standard with a ring with the rear light. why use the old ones? About the turn signals, I like also the PROBEAM® 1157 Led turn signal inserts. Very easy to instal. it just depends on your preference. thanks for all the images shared and the effort taken. Keep the rubber down. Greetings from the Netherlands.

@HDVIBE 6 месяцев назад

Thanks Charles for watching and commenting. I didn't use the rear light with bottom window as the turn signal eliminator kit license frame has LEDS built in to illumination the plate. This was the recommended configuration by Custom Dynamics when the order was placed. Since the rear dog bone light on the ST are run and turn only from factory, the only way to get brake on them when adding LED is to add the triple play module. So I decided to go the route I went by adding the filter lights and the sequential bag lights to get much more light on the rear of the bike. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

@charlesvan9726 6 месяцев назад

@@HDVIBE After all, it is the end result that counts, and it turned out beautiful. nice and educational to see, thank you so much. Kind regards. Charles. NL

@HDVIBE 6 месяцев назад

@@charlesvan9726 Very true. I travel to the Netherlands from time to time...Venlo. I typically will stay in Dusseldorf and drive to Venlo. ✌️

@johnford3761 5 месяцев назад

Great video. Do you have any suggestions for an RG Ultra? Plate relocation

@HDVIBE 5 месяцев назад

Thanks John for watching and commenting. I believe Custom Dynamics has a kit that will work on the Ultra Fender. The ST fender is basically the same except the original license brake is below the light vs above the light. I'd suggest checking the Custom Dynamics website or give them a call. The customer service team is very knowledgeable. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍👊✌️

@JRBACZYK Год назад

Not sure if it's right or not but I eliminate all reflectors on my bikes , Thanks for sharing 🇺🇸👍👍👍

@HDVIBE Год назад

Thanks John for watching and commenting. Many people do eliminate all the reflectors on the Harleys. I eventually do the same but take the opportunity to replace the fork and latch reflectors with Custom Dynamics LED Lighting specifically designed to replace them. I like to have my bikes lit up as much as possible without looking crazy so I can be seen. Being seen a split second sooner can be the difference between having a good day or a really bad day. Ride safe and enjoy. ✌️👍👊

@dayrondlt 10 месяцев назад

Are the blinkers indicators on the dash blinking so fast after this?? Thank you

@HDVIBE 10 месяцев назад

If you put LEDs on a bike for the first time, the dash blanket indicators flash fast. I'd that happens, you need to have the BCM learn that LEDs are on the bike. To do so, put the ignition in run mode...then turn on the hazard flashers. While the hazards are on...turn off the ignition to off and let the hazards flash for 2 or 3 minutes. After that turn the ignition back to run and turn off the hazards. Then turn ignition to off. After that try the turn signals again and see if dash indicators flash normal. If not repeat. If so the BCM now knows there are LEDs on the bike. This procedure is also in the Custom Dynamics instructions for reference. Thanks for the question. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊👍✌️

@dayrondlt 10 месяцев назад

@@HDVIBE thank you so much brother i did mine now watching your video so I didn’t read the instructions haha so the problem with the blinker indicator it’s solved thank you so much again and ride safe brother 💪🏻🤝🤝🤝

@HDVIBE 10 месяцев назад

@dayrondlt You are welcome 👊

@palmettolowlife1996 10 месяцев назад

Is there capability to remove the turn signal function from the filler lights so they only are setup for run & brake illumination? I’d rather only have Amber sequential low profile turn signals on the bags and nothing else

@HDVIBE 10 месяцев назад

Thanks for watching and commenting. The Fillers will only do run and brake unless you add the separate controllers I added as shown in the video. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Ride safe and enjoy. 👊✌️👍

@palmettolowlife1996 10 месяцев назад

@@HDVIBE thanks man. I appreciate the help. Imma do this. Glad you provided content our st models. I want the fillers to do everything with the exception of turn signals

@HDVIBE 10 месяцев назад

That is a good option as well. 👊👍✌️

@Vuku81 Год назад

With the custom dynamics setup, did you go with amber for the turn signal function? On both the filler and bag lights ?

@HDVIBE Год назад

Thanks for watching and commenting. I do not believe the filler lights have a dual color option so the run brake and turn in red. The bag lights do turn in amber and run and brake in red. If you are already a subscriber...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

@truck212121 Год назад

Look into the ultra-cool oil cooler

@HDVIBE Год назад

Thanks for the suggestion. 👍

@palmettolowlife1996 10 месяцев назад

the low profile tail light the version with illumination or not

@HDVIBE 10 месяцев назад

The one I used has no illumination due to the fact the signal delete kit with the curved license plate bracket has LED in it to illuminate the plate.

@palmettolowlife1996 10 месяцев назад

@@HDVIBE thanks ! Placing my order now just confirming. When I called custom dynamics I inquired about dual color Fillerz and they stated they should be released next year. Appreciate the help and great content

@palmettolowlife1996 10 месяцев назад

They should make you an affiliate and provide discount code hahah

@HDVIBE 10 месяцев назад

@palmettolowlife1996 That would be nice.👊👍✌️

@HDVIBE 10 месяцев назад

@palmettolowlife1996 That's great news. Thanks and ride safe. 👊👍✌️