David Tubb's Approach to Load Development

Подписаться 75 тыс.

Просмотров 67 тыс.

50% 1

I had the pleasure to sit down with long range shooting legend, David Tubb, individual winner of over 50 national championship titles to discuss his approach to load testing.
For this interview, I asked David to share a simplified version of his approach to load testing. What he shared was surprising even to me.
Be sure to check out www.davidtubb.com
Berger Stability Calculator
- bergerbullets.com/twist-rate-c...
Videos on Barrel Break-In, Cleaning & Lifespan
1 - John Krieger, Benchrest shooter & owner of Krieger Barrels - • Barrel Maker John Krie...
2 - George Gardner, PRS Shooters & Owner of GA Precision on Barrel Break-In, Cleaning and more. - • George Gardner Talks B...
3 - David Tubb, 50+ time National Champion - • How to Shoot Like John...
Links to tools & products discussed the video:
***Recommended Brass:
Lapua - goo.gl/KKwvPm
Peterson - goo.gl/EZsNep
Norma - goo.gl/939jC7
***Recommended Measurement Tools:
Hornady Lock & Load OAL Guage - goo.gl/Ra2c4Y
Hornady OAL Gauge Modified Cases - goo.gl/nuJgu2
Mitutoyo Calipers - amzn.to/2MRQH3q
Hornady Projectile Comparator (Measures more consistently from bullet ogive instead of total length because bullet tips vary) - goo.gl/MjPYfX
Hornady Headspace Gauge inserts fro Comparator above - goo.gl/JinfHA
RCBS Universal Primer Tool - amzn.to/2MNypjv
Imperial Sizing Wax - goo.gl/nuafkq
RCBS Chargemaster - goo.gl/bdgHTu
Redding Type S FL Sizing Die w. Neck Bushing + Micrometer Seater Die Set (Doesn't Come w/ Bushing) - goo.gl/HTGhUc
Redding Steel Neck Bushing - goo.gl/eTTUko
RCBS Single Stage Reloading Press - goo.gl/dHCoUF
Hornady Single Stage Reloading Press - goo.gl/kdMmyP
Stainless Tumbling Media Tumbler Kit (Use Code: LRSU10 for 10% OFF) - stainlesstumblingmedia.com/
Kinetic Puller - goo.gl/PZkP9A
Stuck Case Remover (Inevitably you will need this to remove cases that get stuck in your die from not using adequate lubricant) - goo.gl/E8c9uK
If you enjoyed the video PLEASE SUBSCRIBE to our channel and share this video with your friends on social media. For EXCLUSIVE CONTENT & PROMO CODES please FOLLOW US on SOCIAL MEDIA. *Links Below*
***Buy LRSU Gear: www.longrangeshootersofutah.com
***Follow us on Instagram @longrangeshootersofutah longrangesh...
*** Like our Facebook page at / longrangeshootersofutah
***Join our Facebook Group - / longrangeshootersofutah
***Donate on Patreon: www.patreon.com/LRSU

Спорт

Опубликовано:

2 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 238

@godofm3tal1 4 года назад

The frustration on that man's face hurt my soul 🤣 like i can just feel what he's feeling and i can't blame him one bit. Let the man talk. He's the legend. He's the one you and everyone else want to hear.

@rileybaxter5421 5 лет назад

Lmfao David looks so exasperated from Bryce’s interjections 😂😂😂

@LongRangeShootersofUtah 5 лет назад

I was cracking up the whole time I was editing it. This was actually take two, take one was PHD level 100% and even I was getting a bit lost in all the details so I twisted David’s arm a bit to dumb it down for the rest of us. He’s been at it for so long and knows so much that he has his own language that most viewers just wouldn’t understand. I didn’t want the video to leave more questions than answers. When discussing dies I had to suggest that most guys struggle to justify spending $160 on a set of Redding’s let alone $250-300 for custom does and he looked at me like I was nuts. Lol. I love David but I’m not all too sure he feels the same about me. Lol. 😂

@charliejensen2934 5 лет назад

@@LongRangeShootersofUtah You did a great job, and thanks for posting. So much good stuff covered even for us that have loaded for so long.

@JoeBlogster 5 лет назад

@@LongRangeShootersofUtah If I may offer some constructive criticism; when interviewing an expert, let the expert do the talking. While your concerns are appreciated, interruptions are almost never the best way of addressing those concerns. First off, give your viewers some credit. I doubt it was really necessary to interrupt him to clarify what ID means. That's a simple enough term that if you don't understand it, you probably shouldn't be reloading (and that's not meant as sass; it's a genuine concern for an activity that can seriously injure if done improperly). Second, if educating new-comers is a priority, consider less intrusive solutions such as including a on-screen note or “card” during editing. At the very least, wait for the speaker to finish his train of thought and then clarify. That way you get both the PHD level talk and the entry level explanation. Otherwise it was a good interview.

@LongRangeShootersofUtah 5 лет назад

That's funny because I myself had no idea he was talking about Inside Diameter when he said ID. But I guess I'm just a dummy but I'm certain I'm not alone. What none of you realize is this was the second take of this interview because the majority of the first one was way over even my head and lacked any kind of structure so on take two I may have taken it a bit too far. Keep in mind these are unrehearsed interviews, done in one single take and I'm not getting compensated for doing them. I've been told by more people, even those close to David, that is the vest interview they've seen because it was broken down in layman terms and not ten miles above the average guys head. David knows more than most of use ever will and he's accustomed to talking in those terms so I wanted to break it down for the overwhelming majority of my viewers who are just getting started. All this negative feedback when it cost so much and takes so much effort to make these videos when I get jack squat from it is really frustrating.

@JoeBlogster 5 лет назад

@@LongRangeShootersofUtah I hear that. And please don't get me wrong. I understand the frustration of existing on a somewhat thankless internet; not least of which is how text strips tone of voice from a message. Sadly on the internet that tends to result in a passive-aggressive tone coming across when it was never intended by the writer. I do hope that wasn't the case here. Your overall interview was very good. I just wanted to offer some tips on how to become better. I mean heck, I've subscribed to your channel so I clearly appreciate your stuff overall. :-)

@MegaPoxie 3 года назад

I thought David was going to talk, he is way more patient than me!!

@MrRichardbryan 5 лет назад

David Tubb is really a nice man. I met him at the NRA convention , I believe in Louisville, Kentucky . I was telling him of some of the problems with cycling on my 6.5 Grendel. He was so interested in helping me he was going to give me a recoil spring in his bag to see if it would cure the problem.

@YurrNext 5 лет назад

David Tubb, the legend! Nice! 👍

@johnx9318 3 года назад

When you have an expert who is trying to explain things - shut up and listen.

@jswnv7775 3 года назад

This^

@MrKen-longrangegrdhogeliminato 3 года назад

That is so right John, kid is so disrespectful of the best shooter in my life time. SHUT your mouth kid, till Mr Tubb is done explaining.

@richiegonzales6750 5 лет назад

Hands down one of the best interviews that I have ever watched. Mr. Tubb dropped alot of knowledge on all of us there. The look on your face multiple times throughout that conversation was pricelss. Thank You for sharing with us. Glad that you were able to spend time with him.

@LongRangeShootersofUtah 5 лет назад

Thank you! Please subscribe if you haven't yet. Check out our interview with Mr Tubb last year and our other interviews with John Krieger & George Gardner.

@frankbellinger605 5 месяцев назад

WOW!!! I've been reloading for 8 years and just recently really started digging into "precision" loading. I learned more here in the last 24 minutes than in the last 2 years!!! Awesome!! This one will be saved to my favorites and RE-WATCHED for a long time!!

@davidlindsay5796 4 года назад

Jesus, just let tubb talk man lol

@MrWachtmann 5 лет назад

Thats one of the most eye opening interviews i´ve ever seen on load development, thanks for dumbing it down!

@Mattytube18 5 лет назад

Thank you, thank you both !

@garithscott8343 5 лет назад

That is very interesting about jamming it into the rifling. Thank you for your time shooting this video.

@brianstuart4203 4 года назад

This video is incredible. So much information it’s unreal

@robertruf9778 4 года назад

David confirmed a few things I do and also opened my eyes to many other things I didn't consider. This man is a legend.

@duckslayer11000 5 лет назад

What a great interview!

@matthennagersguitarlessons 5 лет назад

Thank you for posting, superb information.

@WestDesertShooter 5 лет назад

Fantastic conversation dude. Awesome video!

@LongRangeShootersofUtah 5 лет назад

Thanks buddy.

@aleembruggen 5 лет назад

Great content guys, thanks.

@MC-wh6xk 4 года назад

Having watched the video and reading some comments, especially yours about this being the second take, I'm now wanting to see the first take with the depth you alluded to. Good vid, nice to learn from Mr. Tubb. Thx for your efforts.

@keithalbrecht4785 5 лет назад

Great info, lots of ideas to mine tune my loads. David Tubb, love to hear what he has to say about setting depths.

@Greyzonecompliant 5 лет назад

Thank you for sharing the wisdom.

@keithreinert5835 4 года назад

Lol he is so patient with you constantly interrupting him.

@DatMammut76 5 лет назад

Such an awesome video with a legend. Thanks for this!

@LongRangeShootersofUtah 5 лет назад

My pleasure. Thank you.

@Sydneywizard 5 лет назад

Wow! That really gave me something to think about. Great interview.

@missourimike5150 3 года назад

AWESOME video thanks for great information!!

@everythingphil9376 5 лет назад

Great interview! I love your reactions to some of his practices. Lol.

@gilbertopadilla3611 5 лет назад

One of the best reloading videos on youtube. Thanks LRSU

@LoadsofBacon 5 лет назад

It was awesome meeting you both at SHOT Show!

@LongRangeShootersofUtah 5 лет назад

Likewise!

@mikecash6672 5 лет назад

Another fantastic video! Knowledge dropped like a MOAB!

@MrRayray81 5 лет назад

Good interview. I always enjoy listening to David Tubb. I would like to offer a bit of criticism. Please ask one concise question and then let him answer, without interrupting him. That is the only negative I can see in this interview. Keep up the good work.

@brendavanorden9550 4 года назад

Thanks for a great vid.

@jacobridgedell2096 5 лет назад

Great video! Interesting hearing his reloading practices.. and your astonishment! ha ha

@lmbear 3 года назад

Tubb is awesome. Always cool to hear what he has to say in regards to reloading and shooting. He has a good KISS approach, that you have to respect..

@chipsawdust5816 3 года назад

Thanks for the video, I learned something. I heard about Tubb over 20 years ago when I started doing my own reloading but never thought about HIM being a reloader! Now I have to go to his site and see what else I can learn. As for the criticisms, let 'em run off your back like water on a duck. If people can do better, they should find Tubb and interview him and see how many people watch the video. Today I see almost 42000 views so you must be doing something right. That he doesn't anneal caught me like it caught probably most folks. But his reasoning is sound. It's those little nuggets of wisdom, things we may have never considered before, that make these little videos so worth watching.

@beachboardfan9544 5 лет назад

Prob the best shot show vid I've seen from this year Much better 👍

@turnerables 3 года назад

Still don't have a reloading setup but I sure learned alot from this video. Hopefully I'm prepared once I get mine. Great video as always!

@JB-xu1pm 3 года назад

In the 2004 time frame, David would be on some of the forums and would jump in with excellent pointers. When his DTAC 115's first came out we ordered a batch. We called in and he answered the phone. Very gracious. You can tell the wants the next generation to develop into good to great shooters and riflemen.

@trashpanda2396 5 лет назад

This is Awesome! I will watch this a few times. Thanks for posting this video. Sub

@sterlingwilkey2124 5 лет назад

My brain is ready to explode with all this info. I would love to meet Mr. Tubb

@njgrplr2007 5 лет назад

Horizontal spread is a function of your seating depth? That's the first time I've heard that, but it is definitely something I will start paying attention to. Very interesting.

@martingagnon4547 5 лет назад

It's cool to meet people like David, learning from them and laugh a bit too!

@LongRangeShootersofUtah 5 лет назад

It's been humbling to get to meet and befriend so many incredible people like David.

@martingagnon4547 5 лет назад

Did you meet 1 or 2 incredible morons too ? 😂

@LongRangeShootersofUtah 5 лет назад

It's Shot Show! Of course I did.

@patrickedgewood8598 5 лет назад

I’ve talked to him on the phone.very knowledgeable and nice guy.

@delpittman8056 5 лет назад

great info

@ericrumpel3105 5 лет назад

Yes Sir !!! - he is the Legend & Shooting Competitor Hero !!

@tikkathreebarrels 4 года назад

Jeepers! It's David Tubb I want to hear, not Little Sir Echo..... I'm not sure I can go on for another 20 whole minutes of excruciating buttinsky.... Oh wait.... "I don't clean my gun, I get crappy groups, what gives?". Every day's a learning day fella.

@willway9378 3 года назад

Please publish the phd level video!

@taylorbokshowan5713 3 года назад

Yes please.

@bawhitham23 5 лет назад

Great video! I thought dialogue between You and David was comical. I appreciate your input when Dave started going down the rabbit hole to keep it in simple terms.

@LongRangeShootersofUtah 5 лет назад

Thank you thank you thank you for noticing. I've gotta a lot of flack about interrupting him, etc but folks don't understand how quickly things can go way over the average dudes head when talking with David. This was our second take because the first one was far too technical, I was having one hell of a time keeping up. Thank you again.

@LongRangeShootersofUtah 5 лет назад

Who are the two morons that gave this a thumbs down? Who does that honestly!

@JOHNJCLARK 5 лет назад

Ppl who are wise I want to learn all I can.

@duckslayer11000 5 лет назад

Haters gonna hate lol. The rest of us appreciate Mr. Tubb and yourself.

@LongRangeShootersofUtah 5 лет назад

I can't believe some of the negative comments. It's always the folks that have done nothing to try and help or share or educate that are the first to try and tear down someone who puts themself out there and puts in the effort to bring this kind of content to others. So dumb.

@JOHNJCLARK 5 лет назад

@@LongRangeShootersofUtah I would like to watch him shoot

@wvlongshooter3912 5 лет назад

It's jealousy, that's all you can say. These kind of people, if they are shooter's, won't go far in this sport because they can't take instruction. They can't put their man hood card away long enough to listen and learn. That's why they are haters!!!!!! Jealousy, Jealousy, Jealousy, Jealousy!!!!!!!

@280ackleyimp 5 лет назад

Brilliant job interviewing David and interpreting his theories for the common folk. Every reloader should find at least 1 new tip or trick to experiment with.

@jameskliewer5809 5 лет назад

To get the results he gets, you've got to do what he does.

@tcstory5456 4 года назад

I do the same .5 load development as him just never thought .2 .3 every round made sense to me tell after u found out were ur node was I guess it's just people following the leader and not actually thinking about how to speed things up in a more efficient way or idk but I do the same .5 then fine tune the node then the same about the ladder iv never done a ladder test before at 500 yards but I've always thought about environmental u always here about Scott satterlee doing the 500 but I've never seen or head or witness someone else doing the same just that a ladder at 500 worked but good interview David tub is pretty bad ass and knows what hes talking about through years of experience bad ass interview

@jasonweishaupt1828 2 года назад

I’m using coal slag for brass tumbling. I’ve also experimented with metal grit and sand. I’ll be trying brass powder next. Metal grit cleans in 15 to 30 minutes.

@scottinohio701 4 года назад

Best reloading vid I have seen!!!!!!!!!!!!!!!!!!!!!! From the master!!!!

@ditzylemmon5094 5 лет назад

Some great info here

@LongRangeShootersofUtah 5 лет назад

Thank you.

@Johnny-jr2lq 5 лет назад

Ummmmm holy moly this video was full of information for a new reloader I’m glad I watched it

@LongRangeShootersofUtah 5 лет назад

Thank you. Please subscribe and follow Long Range Shooters of Utah on Instagram and Facebook.

@roytallericoGunner Год назад

David Tubb is a legend..why did they match him with this guy? This would be good without him interrupting every 5 seconds.

@mattyz28kbrracing80 4 года назад

That man has forgotten more than I will ever remember. Interesting take on bullet seating depth. I'll have to try it with my rifle and see what happens. The alternative is getting into annealing, so I'll try the free stuff first!

@Sean-pw3yr 2 года назад

… so he didn’t remember what you didn’t remember?

@afroghair6793 4 года назад

David Tubb is still the man.

@georgeholt8929 3 года назад

David is beyond Expert he is the Master Marksman!

@joshthompson5870 2 года назад

I'm impressed the guy on the right didn't get slapped off his chair. I made it 5 minutes into the clip and thought he needed to be. Might know his stuff, but the guy on the left has probably forgotten more than what the guy on the right has learned

@243Outdoors 5 лет назад

Mind Blown, My hair looks like yours.

@duckslayer11000 5 лет назад

Don't you love it when someone at the top level of a discipline reveals how simple they keep some aspects of their setup.

@jalenladue5133 4 года назад

How accurate can a ladder test be for a 243 at 200 yards? With it being such a flat shooting cartridge ive always figured further the better. Easier to read also at those distances.

@MCheekeOutdoors 4 года назад

When you jam .010" in the lands, where should one start for charge reduction from max load ? Thanks

@planeiron241 3 года назад

1 grain test fire then go from there..make sure bolt lift is ok then your off to the races...by the way if your running max make sure you have a action that is worthy of the pounding...bolt faces get pinged from pressure..causing the case head to swell and in turn will cause issues at the press

@silverback7659 5 лет назад

Would also like to know how to properly record down load data and what to record,ect. Also just some tips on organization would be great.

@LongRangeShootersofUtah 5 лет назад

Great question!

@Johnyrocket70 5 лет назад

Best interview I ever seen David do, he usually pitches a product the regular Joe can't afford or his magic unicorn bullets.

@LongRangeShootersofUtah 5 лет назад

I thought so as well but apparently a good majority thought my input in the conversation was super annoying and distasteful. Makes me consider taking it down.

@Johnyrocket70 5 лет назад

@@LongRangeShootersofUtah don't you dare take it down. You did fine.

@Johnyrocket70 5 лет назад

@@LongRangeShootersofUtah the biggest mistake I made this month was buying a ruger precision rimfire then finding out it costed like $49 to much to compete in nrl22 base or factory class. They need to make an exception. It's msrp just over their limit. I cant compete in the open class div because I would need a better barrel to compete. What do you think?

@wilfdarr 4 года назад

@@LongRangeShootersofUtah You did fine. Don't take it down.

@audiogod2929 3 года назад

David Tubb's kiss methoth is the bomb ! Love this guy

@randylong8156 Год назад

I can't even watch this I'd love to hear him speak God dang it!!

@conservativesniperhunter7439 5 лет назад

Great to see you talking to the legend David Tubb . In regards to the use of the Hornady lock n load bullet comparator, aren't we better off if we use a once fired fire formed case fired in the particular rifle ( that has been drilled and tapped to fit the lock n load bullet comparator tool ) we will be reloding for that has been sized in a die such as the Redding body die that only sizes the body and not the neck of the case rather than using a modified case supplied by Hornady ? My understanding is that there could well be anything up to .007 or more difference between the Standard modified case supplied by Hornady to a case that has been fire formed in ones rifle .

@LongRangeShootersofUtah 5 лет назад

That's a great question. I would think you could easily run the hornady case thru your sizing die and as long as your die is set up with the correct amount of headspace that you want you should be good to go.

@jamiem5364 5 лет назад

@@LongRangeShootersofUtah I think Jim meant that its best to use a fired piece of brass from your rifle rather than the ones hornady sell, you can even send them one to get them to drill and tap for this reason. Its easier to just buy a drill and tap if you dont have that size and make your own, thats what i did buy a tap and made my own.

@luvtahandload7948 5 лет назад

Jim Gourlas You don"t want any sizing of your fire-formed case (arguably) to get the greatest benefit of the Hornady LNL tool. I just went and measured one of my Hornady Modified cases in a Redding Instant Indicator. It is .010" UNDER SAAMI minimum chamber specs. That means it can vary up to .017" from any one chamber.

@luvtahandload7948 5 лет назад

@@LongRangeShootersofUtah No sizing die will touch the shoulder of a Hornady Modified case. I just went and measured a modified case in a Redding Instant Indicator and it was .010" under SAAMI minimum chamber specs. The Modified cases are far smaller than even factory ammo.

@luvtahandload7948 5 лет назад

@@jamiem5364 What size drill and tap did you buy? I was told the thread pitch was Hornady's own proprietary design.

@tobiastorsi 5 лет назад

A little off topic. Which primers are the most consistent and accurate? I am loading .308 and am trying to get the most out of every component. Thanks!

@LongRangeShootersofUtah 5 лет назад

Your best bet is to by match primers like the Federal Match or CCI BR (Benchrest) but the standard one typically works well also. Most precision rifle shooters gravitate towards the Federal Match or CCI primer (standard or BR). Don't be afraid to test different primers to see what shoots best. Also, try to buy your primers is large quantities of the same lot, in fact, that's how I keep track of the number of rounds I have shot thru a barrel. When I buy the rifle or build it I will buy enough primers of the same lot to outlast the barrel and I keep them in a box with all the components to reload for that rifle that way I can always count how many primers I have left and get an idea on the round count for the rifle.

@tobiastorsi 5 лет назад

Long Range Shooters of Utah great Idea to count the round by the primers. Will definetly try that. I can get CCI BR2 or Federal 210 Gold Medal. Which would you rather choose? Thanks again!

@LongRangeShootersofUtah 5 лет назад

@@tobiastorsi Both will be fine, one may shoot a bit better but you'd have to test them.

@wilfdarr 4 года назад

🤯 23:00 So he doesn't aneal, sizes his brass all over, shoots brass up to ~30 times and doesn't split necks? So split necks gotta be primarily from loading too hot?!

@outlander330cc 5 лет назад

I had always heard that it was dangerous to have the bullet touching the rifling when loaded, because the static friction of the bullet in the bore would cause a pressure spike before getting the bullet started moving. Apparently this is not the case?

@LongRangeShootersofUtah 5 лет назад

You can expect higher pressure when jamming the bullet but anytime you reload you should always start low and work up until you see pressure thus preventing any problems.

@sniperjoe 3 года назад

Man the utah guy really did a huge disservice to this video.... how about next time you let him finish a sentence

@CallMeUbba 3 года назад

Thanks for making the video but next time consider saving the explanations for editing in after the interview

@Deuceblank 5 лет назад

MIND BLOWN!!!! How many here have their eyes bugging out of their head lol

@LongRangeShootersofUtah 5 лет назад

I'm tempted to take it down after all the negative comments I'm getting here and on social media about it.

@TomH1947 5 лет назад

@@LongRangeShootersofUtah DON"T allow uneducated trolls to eliminate this valuable info. Lots of ppl want to berate David. Yes, he sell his products. Should one not provide for his family? Your interjections were fine w/ me. Everyone needs to look at something in the reference of "what can I take away?" If nothing move on. That's a simple, mature outlook that will serve well for most normal ppl. Trolls have other needs. Putting ppl down is their loss. Pitiful. Hurummp!

@spider-man2291 5 лет назад

@@LongRangeShootersofUtah I hope you don't. People don't realize how difficult it is to guide a discussion under such circumstances and to account for all learning levels. You did really well considering, and will no doubt improve over time. If people let that get in the way of knowledge, then they aren't worth the time. Better off reading, but then why come here? People need perspective. Thanks for providing such solid content, it's appreciated.

@shadow6pt533 5 лет назад

I'm new to reloading and would like some clarification please. 1. Why did he do plus and minus ten thousand when going in .5 increments when finding Max pressure? Seems like some wasted ammo. 2. Why did he say to test 40.2 and 40.4 (areas that hit high)when 39 to 39.5 was the flat node spot? Thanks everyone!

@Sydneywizard 5 лет назад

I was wondering about your second point too.

@LongRangeShootersofUtah 5 лет назад

I think you're getting the load testing mixed in with seating depth testing. He's stating that unlike most folks I know that will do seating depth & load tests separate that he does them side by side. He'll load sets of three for each load, for example three at 39 gr then three at 39.5, then 40, then 40.5 and so on that are all 10 thou off the lands. Then he loads the same thing again that are 10 thou jammed into the lands. Once he sees a node from that test he'll go back and fine tune by testing in .2 gr increments and so on. Does that make more sense? Thanks for asking a legitimate question and not just leaving a nasty comment. I'm far from perfect at this but I go out there and do my best to bring you good content in the hope that you can learn something from some of these amazing people that you might not otherwise meet.

@Sydneywizard 5 лет назад

@@LongRangeShootersofUtah Ignore the trolls and know-it-alls. We live in a society of armchair geniuses and that's sad and annoying. Keep up the great work.

@shadow6pt533 5 лет назад

@@LongRangeShootersofUtah Thanks for the response. It makes sense. Try not to let the silly haters bring you down. I appreciate your content and help!

@jamiem5364 5 лет назад

@@Sydneywizard totally agree mate, great vids just ignore the dipshits!

@ntaylor1829 2 года назад

Berger Stability Calculator link is not correct, fyi Also, I need some H1000...anyone?

@isaacmacfarlane8134 4 года назад

Good content, but I would put you in your place if you interrupted me so much. Glad he was patient so we could still get the great info.

@taylorbokshowan5713 3 года назад

I’d like to see the non dummy version

@jonlennon3348 3 месяца назад

Bryce are you interviewing yourself or David whom we would like to listen too.

@LongRangeShootersofUtah 3 месяца назад

It’s easy to critique from the couch. If I could go back and do it differently I would. Have a nice day. You’re welcome for taking hours of my time to bring you this kind of content only to complain about it.

@withoutfurtheradoforever 2 года назад

The Master.

@stuartmarkman769 3 года назад

I thought David Tubb was supposed to talk but he had a hard time with motor mouth interupting him.

@LongRangeShootersofUtah 3 года назад

stuart markman the motor mouth brought you the opportunity to hear from Mr Tubb so...

@wayneacoker 3 года назад

Great information to bad David Tubb didnt get to talk.

@codychildress7859 Год назад

God let the man speak

@ericb.4358 3 года назад

Hmmm... old ammo can have greater net tension variance and needs "refeshed" by seating10/1000 shorter. interesting.

@mr.noneyabidness 2 года назад

There are some interviews where the interviewer should just let the interviewee talk for the benefit of the video and everyone else watching.

@Awesymoto 5 лет назад

Stop interrupting Mr. T it makes it hard to listen to as well!

@stefanschug5490 3 года назад

David talks in this interview about his reloading method that works for him as his success story tells. As every barrel changes its lands., especially in the throat area over the time of use, jamming the projectile into the lands requires the continuous increase of OL with this method. It is much easier for the average reloader to find a good node off the lands and stick with it. My only critic is that you promote simple cup and core projectiles like the Sierras and Bergers, which are just better, improved match bullets, for big game hunting. Terminal performance of these projectiles is often horrible especially when combined with poor shot placement and fast magnum rounds. Only prime projectiles like the Nosler Partitions, A-frames, Barmes X, Hornady GMX or any good bonded bullet should be used to achieve ethical kills.

@taylorbokshowan5713 3 года назад

Don’t take crappy shots.

@josecanisales3491 3 года назад

Let David talk, stop interrupting !!!!

@timsnowdon8455 2 дня назад

Pinky and the brain

@blakemilford9128 2 года назад

Thought David was going to punch him for interrupting so many times.

@Guide504 3 года назад

'Fat and round and kinda forgiving' to someone else! Love it. DT doesn't like being asked to talk then being talked over, he is a raging ego and competitor in a bag of skin, brilliant but I'd give him due where it's due and maybe even a mountain dew!

@DeereX748 4 года назад

Great interview, would have been better if the interviewer hadn't interrupted so much. I think most reloaders are aware of the points he kept jumping in to make. I do have a question about Mr. Tubbs practice of weighing the empty cases prior to charging them. I assume it's to eliminate differences in case weight to determine actual charge weight, when using a progressive loading system. My question would be, is that step necessary if you measure and weigh each individual charge as you load?. I use a single stage press, and a digital scale that is accurate to 0.02 grains. I weigh each powder charge after I've set my powder thrower, which I set lower than my desired weight, and trickle each case to the desired weight within +/- 0.06 grains. This gives me a variation of no more than 0.12 grains between individual rounds. It takes longer, and I'm only this precision-oriented on my long-range rounds, but the chronograph and target pattern shows it works. This is for a 7.62.51 and a 6.5 Grendel.

@briangunner8355 4 года назад

GOOD GOD MAN ,,, SHUT UP , LET THE MAN TALK!

@CREGHermosa 3 года назад

Completely agree

@JOHNJCLARK 5 лет назад

Can I borrow him for a week

@Deuceblank 5 лет назад

How many annealers are we gona see for sale on craigslist LOL

@LongRangeShootersofUtah 5 лет назад

Deuceblank lol. Well he didn’t say you shouldn’t anneal, he just said that if you’re jamming your bullets that you can get away without it. He anneals, it just depends on what he’s doing.,

@wvlongshooter3912 5 лет назад

Exactly !!!! Good time to buy one for cheap..