dBXL-E 2.0"SystemUPGRADE"How EASY it is-CASTLE 800KV/XLX2-Uninstall/Install/Wire/ThrottleCalibration

Подписаться 2,9 тыс.

Просмотров 3,2 тыс.

50% 1

UPGRADED the Dbxle 2.0. Figured I’d do a video on how EASY it is to change out your RC system. I actually just did the Outcast8s as well. After I test this 800kv motor out with this gearing of 22/46(just bought a 23t and it fits👍), I’ll put the 1100kv in and see what’s the BETTER option. I’m DEAD A** leaning towards the 1100kv already. But still need to feel both systems in the same unit.
Outcast8s UPGRADE next.
Have a GOOD ONE EVERYBODY and STAY UP!!
-RC in video:
-Losi dBXL-E 2.0 (Red):
www.rcplanet.com/losi-dbxl-e-...
-Electronics Installed:
-Castle 2028-800kv motor/Mamba XLX2 ESC Combo:
www.amainhobbies.com/castle-c...
-Castle B-Link Adapter:
www.lprcs.com/castle-creation...
-Spektrum S9120BL 1/5 High Torque Metal Gear Servo:
www.rcplanet.com/spektrum-s91...
-Batteries I’ll use:
-2 Spektrum 14.8v 5000mah 100c Burst:
www.absolutehobbyz.com/search...
Or
-2 Powerhobby 14.8v 8000mah 200c Burst:
www.powerhobby.com/4s-8000mah...
-Losi wheels & tires right now:
Duratrax Lockup X (mod needed)
www.mytobbies.com/dtxc5501-lo...
Mod for Losi wheels and tires:
• Losi dB xl-e 2.0 “NEW ...
-Gearing in the Losi:
-GDS Racing 8mm Shaft MOD 1.5 M1.5 Pinion Gear for FG/HPI/Losi & More (22T) www.amazon.com/dp/B07XZMBJ2R/...
-46t Center Diff Spur (Integy):
www.integy.com/st_prod.html?p...
#LosiDbxle2 #SystemUPGRADE #KruseNStuff

Развлечения

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@RCplamodel 3 года назад

The car removed the old one and installed a new one, so it was reborn!~~~ That's a great video. It's a very good channel. 👍😎😍👍

@KruseNStuff 3 года назад

YES SIR. THANK YOU.

@907arcticrc6 3 года назад

Awesome video and Rc upgrades bro 👍🥶👍

@KruseNStuff 3 года назад

THANKS robert.🙏💯

@islandrc-duke1972 3 года назад

Awesome build

@KruseNStuff 3 года назад

THANKS -Duke🙏🙏💯🍻✌️

@CoachD386 3 года назад

👍🏾💯 nice install fam

@KruseNStuff 3 года назад

THANK YOU Coach🙏💯💪🍻✌️

@Todd_G_FPV 3 года назад

Nice man can't wait to see the difference between the 800 and 1100.

@KruseNStuff 3 года назад

DEFINITELY. I’ll get the 1100kv in it when I can. Had an issue. But did that same thing with the Outcast8s.😁

@MrMeDos 3 года назад

Im running this same setup but with a 19t pinion. Motor runs cool. Esc reaches thermo cutoff at 200 degrees. I bought a 50mm GC fan for the xlx2 and it fixed it. You will need another fan bro. Just giving you a heads up if you havent found out by now. Enjoy your build. My outcast has the 800kv combo on 52pinion 34spur with gc fans. No overheating. Dopeness

@YOOPDLRC 3 года назад

Very nice 👍👍👍 ~~~!!!!!!

@KruseNStuff 3 года назад

THANKS MAN.🙏💯

@ramblers69 3 года назад

Cool mods, :) 😎👍✌️🔥💯

@KruseNStuff 3 года назад

THANKS Tom🙏💯🍻✌️

@silly_d_williams2167 3 года назад

Great information... Also I got those protek Tru torque... I love how lightweight they are and the spinning handle 👌🏾

@KruseNStuff 3 года назад

THANKS BIG BRO. YES SIR. LOVE EM. I also picked up the dwalt gyroscopic screwdriver and pro tek tru torque bits. LOVE IT BRO.🔥Turn your wrist right it tightens, left it loosens.

@latviandronelife 3 года назад

👍👌

@KruseNStuff 3 года назад

🙏🙏💯

@Blueknight1960 3 года назад

IMPO, it is better to cut the rear tab off the esc mount. The esc will sit flat and it's not on top of the center diff mount plus the front tab is still there to use a ziptie for the wires. Edit: From what I have read and video's I have watched, one of the reasons the xlx2 has been catching fire is too small of connectors. You need to use 6.5mm or the qs8 connectors to carry the higher amps. Get rid of the ec5 connectors.

@KruseNStuff 3 года назад

EXCELLENT info. DEFINITELY should have cut the rear tab as opposed to the front. ALL GOOD. I can get the esc up to get into the center diff. Once I do. I’ll cut the rear and slide it down. Lost the front. Oh well. I’ve seen videos on it and I’ve been watching it. LOVING it.

@chardison6026 2 года назад

How’s the xlx2 holding up with the ec5 connectors?

@KruseNStuff 2 года назад

It has been fine other than a couple leads blew. Nothing major, just a solder back up thing. But like everyone I suggest QS8s. I’m switching over. I hate soldering so I am starting to buy from radio control power. You can get qs8 or just 8mm bullets attached. I get 8mm bullets and buy a series adapter. 8mm to qs8s and it’s been PERFECT. Plus I can switch to an 8mm bullet to ec5s adapter if I want to use my Ec5 batteries. Be giving them a shout soon🙏🍻

@johnmiller4553 2 года назад

NICE🤙. WHAT WHEELS ARE THOSE

@KruseNStuff 2 года назад

That is some dBoots BackFlips in the front & some Traxxas Paddles in the rear. THANKS John🙏🙏💯🍻

@eddiefitzgerald7731 3 года назад

How you bolt the esc down

@KruseNStuff 3 года назад

Shoe Goo

@eddiefitzgerald7731 3 года назад

How to install esc what u used

@KruseNStuff 3 года назад

I use Shoe Goo. I shoot u a link. Shoegoo Combo Adhesive, 2 Pack (1, 1, Clear/Black www.amazon.com/dp/B0070AUOBI/ref=cm_sw_r_cp_api_glt_fabc_A78X8MJCQS0NTCE3R8KR?_encoding=UTF8&psc=1