Demo FT991A Getting on Air Adj. TX BPF 100-3000 using Pre-Recorded Messages CH1-CH5 & QSO KJ7PYK

Подписаться 2,9 тыс.

50% 1

This video shows a live demo of how I use my pre-recorded voice messages when freeing up my hands to write and type the call-sign into FL Digi to look up the other station while calling CQ without touching the microphone.
The TX BPF is a setting which adjusts your acoustical range in the transmit signal. There are three settings and the one I prefer is 100-3000 Hz. This provides the widest range of acoustical voice response to be in you transmit signal. The normal voice response is 300 to 3000 Hz, so this setting reproduces your voice as best as possible. The narrower settings are designed to allow a more treble effect to get you through the tightest of pileups. I find the 100-3000 Hz is the best for me and I have no problems getting through.
The below video shows how I programmed the CH1-CH5 recordings in case you need refer to build your own recordings.
• Programming FT991A CH1...

Опубликовано:

22 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3

@xeon_one 4 месяца назад

Question: How can you lower the record value ? When I hit my playback, it's so loud it's like 80% trying to bring it down 5-10% I'm missing something simple.I bet. Thanks for the video. It helped. Ps I use the optional keypad, which makes it much easier no swapping through screens try it. KC2BGN 73's

@westtexasvideogateski5juf255 4 месяца назад

Good evening how you doing, tap MENU /SETUP using the MULTI knob and select setting 010 DVS RX OUT LEVEL and tap ENTER, use the Mutli knob and adjust to 20-30 and tap ENTER this will be more easy in the ears, give this a try and ket me know if you need anything else, thanks for the message and 73

@xeon_one 3 месяца назад

@@westtexasvideogateski5juf255 Thank you so much it was right in my face and I didn't even seen it. wow Thank you for the good work you do keep it up!