No video :(

Desqueezing and Exporting Anamorphic Widescreen in Davinci Resolve 18 // It's So Simple

Подписаться 3,3 тыс.

Просмотров 8 тыс.

50% 1

Desqueezing and Exporting Anamorphic Widescreen in Davinci Resolve 18 - It's So Simple
In this tutorial I'll be showing you how to desqueeze anamorphic footage in Davinci Resolve Edit Page and also how to export the correct anamorphic widescreen aspect ratio.
This is relevant when filming in 4k, 6K or even 8K and above using any anamorphic lens, for example a 1.33x, 1.6x or 1.8x like I'm using. Using this simple step-by-step process you will be able to maintain the correct anamorphic widescreen resolution for uploading to RU-vid in 4K or above.
When exporting your video edit in 2.39:1 or 2.40:1 aspect ratio resolutions these settings will give the black bars top and bottom. This is the simplest and most accurate way to achieve this in Davinci Resolve Studio 18.
I hope you find this Davinci Resolve video tutorial both helpful and time-saving for the future.
Anamorphic Aspect Ratio Cheat Sheet: www.unravel.co...
📽️ Filmed, edited and produced by Renclif Media
🎵 Music: ‘Folklore' by Mintz, licensed through Artlist.io
🔻My RU-vid Filmmaking Gear🔻
🎥 BMPCC 6K Rig Filmmaking Kit - kit.co/Renclif...
🔻My Favourite Video Production Tools🔻
🎧 Music from Artlist (2 Extra Months Free Subscription) - bit.ly/artlist...
🎞️ Film Plugins 10% Off code RENCLIF - www.dehancer.c...
🔻Say Hello to a Fellow Filmmaker🔻
📷 Instagram - / renclifmedia
⏱️ TikTok - vm.tiktok.com/...
............................................................................
This is to notify you (the viewer) that I have linked to products on this page that I can earn a commission from. However, this does not in any way influence my decision to promote these products.
If you’ve watched the video above then you will know that I use and will continue to use all of the products I have recommended in this video, because they are awesome products!
By linking to the products it is simply a way to support the time and effort that I have put into producing this video, and to help me with the cost of filming and producing more video content like this in this future.
As an Amazon Associate I can earn commissions from qualifying purchases from any of the Amazon affiliate links contained within my Kit.co filmmaking kits.
As a member of the Ebay Partner Network I can earn commissions from qualifying purchases from any of the Ebay affiliate links contained within my Kit.co filmmaking kits.

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@lifeandThings Год назад

Thanks! That Was helpful. I like the cheat-sheet website too!

@Renclif Год назад

Hey, so glad to hear it was helpful! Yes that website is super useful and accurate! Thanks for watching!

@barone_s5502 Час назад

thanks for your support

@bulliontoy 4 дня назад

Unfortuneately, when I do this every workspace playback shows different aspect ratio, and size. Transforms are per workspace just in the transform effect inside grading node. I've tried everything and I have all different zooms and sizes of plapback or workspaces all look different.

@birdingman 6 месяцев назад

Found your video by chance, nice one mate. Thank you so much for sharing, it made my day!

@Renclif 6 месяцев назад

Hey, so glad it was helpful! Many thanks!

@808-Stat3 5 месяцев назад

just got my venus 50mm . thx for this video my man.

@p-alex-studio6008 11 месяцев назад

You can directly de-squeeze by the correct anamorphic value in clip attributes :)

@Renclif 11 месяцев назад

Yes thanks I know, however some anamorphic lenses aren't constant desqueeze, such as the Great Joy 50mm 1.8x and many other anamorphic lenses, so that's when you have to do it manually. But yes it definitely saves a lot of time simply changing the clip attributes on all the clips in one go. I just wanted to show how to do it manually.

@12yfilms 8 месяцев назад

@@Renclif Thank you for bringing this up! I just bought the 50mm from Great Joy and was setback by learning the 1.8 squeeze in not constant. This tutorial helps tremendously! All my closeup shots (less than 4 meters I believe) need to be changed to 1.6 or 1.7 from my understanding. thank you for this video!

@Renclif 8 месяцев назад

Hey, so glad you found it helpful! It's a brilliant lens with plenty of character and nice colour rendering and yes that's correct, typically subjects within about 4 metres or less will have a reduced squeeze factor of between 1.6 and 1.7. Although, there are even some cases where this can occur with further away objects, it's easy to adjust once you get used to it as your eye will pick up on it. Thanks for dropping by!@@12yfilms

@travelpl66 Год назад

good job my friend👍5

@Renclif Год назад

Hey, thanks a million my friend! I appreciate your support!

@Joistick_88 5 месяцев назад

спасибо бро годный контент

@Renclif 4 месяца назад

My pleasure, thankyou!

@TriniWeekes Год назад

thanks bro.

@Renclif Год назад

Thanks my friend, I hope you're going well! I appreciate all your support! 🙏

@DaneBrammage 10 месяцев назад

If I’m not mistaken doing the de squeeze this way means you can’t key frame things like a push in or out without the footage distorting, is there any solution to that?

@Renclif 10 месяцев назад

Hi, yes you can still do a push in or pan with this method, for a zoom in or out use the Dynamic Zoom function in the inspector. Alternatively, if you want to set all of your clips to Anamorphic aspect ratio without manual adjustment go to your media pool and select all of your clips. Now got to Clip Attributes and change Pixel aspect ratio to one of the anamorphic presets. Hope that helps, thanks!

@omalicuchin09 10 месяцев назад

Hi so i have a sirui 35mm anamorphic 1.33x i shoot in 4k dci 4 4096x2160. In my bmpcc 4k i have the dezqueezed buttom turn on. My timeline is at 4096x1706 for a 2.40 aspect ratio. In aspect artibrutes i have set to 1.33x. Do i still need to unlick and change to 1.33?

@Renclif 10 месяцев назад

Hi, because you're shooting in 1.33x and your lens is constant desqueeze you can actually get Davinci to adjust your aspect ratio for all of your footage automatically by going to your media pool and select all of your clips. Now got to Clip Attributes and change Pixel aspect ratio to 1.33 anamorphic preset. Otherwise you can also adjust it manually if you prefer and yes you would need to unlink the X and y and set the X to 1.33. So two different options for you!

@omalicuchin09 10 месяцев назад

@@Renclif thanks u so much for the info

@duhduh14 5 месяцев назад

do you know how to rotate the video so I can upload a widescreen anamorphic video to Instagram?

@Renclif 5 месяцев назад

Yes, right click on your Timeline and choose Timeline Settings, under Resolution tick the box that says "Use Vertical Resolution". Now you have a vertical format, you then need to rotate your footage 90 degrees by going to your Inspector and change "Rotation angle" to 90 degrees or -90. Hope that helps!

@duhduh14 5 месяцев назад

@@Renclif omg YOU'RE HEAVEN SENT 🙏🏻🙏🏻🙏🏻😭😭 THANK YOU

@IvanGorbenko 8 месяцев назад

Or you can press "cinematic" and you will not have black bars.

@Renclif 8 месяцев назад

You mean theatre mode in RU-vid? I like the black bars because it feels like watching a movie in cinemascope and it feels more immersive.

@livestreamsuk6004 6 месяцев назад

Something wrong there mate. It looks right when you drop to timeline and stretched after you zoomed it.

@Renclif 6 месяцев назад

There's nothing wrong, this is the correct way to de-squeeze anamorphic footage manually and achieve the 2.39:1 aspect ratio or whichever ratio you prefer, so it's ideal for anamorphic lenses which don't have a constant squeeze. Otherwise you can use the other method where you change your Clip Attributes, Pixel aspect ratio to one of Davinci resolves anamorphic presets.