Detailed MVT Digital Direct Ignition Installation How-To : TPR 86cc Build : Part 21 

Thank you this will be the definitive MVT installation how to guide on you tube or web excited to see pt 2 thank you for dumbing it down!

Well done Brent! Best, most detailed and longest MVT Iggy install and setup video out there. Wish that video was around one year ago. Could have saved me a lot head aches. You do remember my Jog LC Roost build? Anywas, it was good to see you again. You look fine and healthy. Hope that beast is gonna brake some records.

thanks, this was very helpful, Many folks have no idea of how to set these up properly.

Thank you I’ve been waiting for this!!!

So cool... Great tutorial, so informative. Thanks a bunch for talking the time to make this video and help others out. Really kind of you.

thanks for taking the time to explain. helpful information! just installed mine!

Menn thanks you soo much your the only one that make it clear and simple 🔥 keep it up !!

Thanks for the new 4 K resolution very nice tuto for this installation 👍👍

Great vid and tutorial as usual. Thanks man.

Great video. If you want an absolute TDC measurement I reccomend using the piston stop method and a degree wheel. Rotate till you hit the stop, roll it the other way hit the stop and split the difference in half. The dwell at TDC means you can easily have a few degrees of dead spot. All that said in my own video I use this method as well because I am lazy.

Thanks for this great video 👍👍

Thanks for the video!!

Thank you for this detailed video sir.

cool video and Happy thanksgiving and may your holidays be bright

Very good tutorial !

The stator is slotted to make final adjustments if needed. No need to remove or loosen flywheel again.

i really liked this video it was informative

I’ll try contact SSS or scootertuning, tell them why I have and hope stuff fits!!! Thanks for all your input

Very nice montage video Thx ;)

Thanks 👏👏

Thanks vid helps a lot

Thanks Nice help fully Video

Lookin at aliexpress,and the smaller idle jets I promote are for Mikuni carb. "often used for arctic Cat,Polaris,Ski-doo twins and Yamaha Viper 2 strokes".Its for snow mobiles stationed on south-pole.So the jets are for asian jungle and deserts.That is why you have 123 mm nozzles.( ;

💚👌 PERFECTLY👍💚

Top

Thats what i meant when i told you before that they should sponsor you and they should send the parts for you to test it and you as person that you are should give your honest opinion about the part's

Thankyou for this video It’s made my re-wiring scooter jobs 100 times easier Keep them coming dude ✌️ love from the UK

thanks informative video, i cant stop laughing over that exhaust tho xD

Great video! Do you have the timing curve chart? Like where in the rpm range it retards at and how much

sir can you make a video on how to wire a yamaha jog next zone.. tnx

Any idea if this kit will fit my Chinese minarelli clone?

New to minarelli, so I’m watching all your videos! Can I use a 1E40QMB for the work that your doing? Like water cool set up and mini stroker?

We need a video of how to wire this inner rotor i need to install mines

Now I just need a better pipe on the scooter like a roost sp1 would just wake that cylinder up

hello, sorry if I ask, but are the assembly instructions for the mvt there? this ignition that you mounted and with the lights or without? Thank you

A very interesting movie. For many months I have been looking for graphs generated by MVT DD from EPROM1. Please let me know where I can find them

Sir pleace tutorial CDI DC aplicaion to two stroke....

What advance should I use for my barikit 80cc with stock stroke 39,1 mm. And I already put it on but there is something weird going on when I kick it the kick wants to fly up again and it’s kinda hard started

Hy i'm not in agree, for your 86cc with 44mm crankshaft it's needed by Top performance schedule 20° BTDC. With 0,35mm of BTDC you have 1,43°. You can calculate with this formula X°= (180xYm)/ms . Where "Ym" will be the BTDC and "ms" will be motor stroke. For example, with 44 motor stroke, you'll need X°=(180x4.88)/44 X°=(578.4)/44 X°=19.96°. BTDC 1,43° it's not too much anticipate, and the motor can't ignite the gas properly.

Hey bud I have a mvt millenium iluminage ignition for Yamaha bws my wiring is not the best but I can take apart an engine throw it back together and fix everything but electricity not my thing I was wondering if you know any videos on how to install the mvt Millennium one MVT‐EXT120

Haiii Mr can the mvt digital direct 19 go on my standard crankshaft will it do any harm to my crank it's 10pin

I got a malagutti f15 wt a stock crank shaft polini shoud it be 40mm sett

19:23 even if i have a full circle racing crank stock displacement my spec should be 0.40 btdc? Its weird few people tell me that i set it wrong and they said it should be 0.35btdc

Thanks for the information, who would you recommend for my build? I would like to buy a mini stroker and maybe a set of gears. I currently have a polini cast bore 70cc, Keli pulley and ramp ready to go in. I would also like to put in and over range rear pulley and probably a longer belt. I have watched all your videos and any advise is much appreciated! Mahalo!

Happy Thanksgiving. .

Hi (2m 40s) is it machined rotor?

Where can I get an electric micrometer? With the thing that spins into cylinder head

Quick question, do you know the difference between a 50cc minarelli engine and a 50cc morini engine?

Do you know the separation between the rotor and stator of the mvt dd ? and bought a new one and the cone is not correct it does not go in at all and is very separated, 7.60mm from the stator to the rotor I'm sorry for my English, I'm Spanish, I use the google translator

I found that MVT recommends 0.35mm BTDC, while my cylinder manufacturer recommends 4-4.5mm BTDC.

Questa accessione si puo paragonare ad una selettra Malossi?

Hi Mr Scoot.I have a question,yesterday I have buy mvt ignition,but witchout manual,and I don't know how to connect wires,where I can find model name?On official store website they have manuals only for specyfic models of motorcycles,or they name models by DD/21,19...

On my scooter you have to buy the whole airbox if you want a replacement paper air filter element is that a normal practice for most scooters ? It's a Hyosung. Makes me feel like it's a toy. It's $38 for the air box delivered.

Hi dude I hope you read this and get back to me 👍🏻 I really need to know if the taper on the Yamaha crankshaft is the same as the Chinese crankshaft?? I need to know this as I own a CPI mvt ignition but my new cylinder requires a 85mm rod which I can only find for the Yamaha. I hope and pray that the taper is the same or I may have to buy another mvt ignition 😒

For am6 what is measurement before tdc? I cant find nothing about it

How much Millimeters before top dead center has MVT-DD06 ? 😁🛵💨

Does this guide differ for my derbi? Ofc my derbi doesnt have a variator

Its me again. Will these help me gain more power on my kasea and apex 90s

I have same ignition on my piaggio nrg 50. Is it ok to adjust it at as you are?

Hi, i swap ignition to Mvt and engine starts on reverse! What the fxx? Any one with ideas? I was told I have to much Adv timing, so I use half to what cdi demand and still wean I kick start, engine starts on reverse ...

Do you know the size of the two screws and washers to secure the stator to the stator plate.

did you test different settings other than 0.35mm ?

Hey do you know paul4608

انا عراقي اتمنى ان تضع ترجمه للفيديو

Where did you get your dial indicator from

Ciao avrei un problema con questa accensione praticamente allo statore passa la corrente soltanto che poi vado a vedere alla bobina e non arriva corrente può essere la centralina? Grazie mille

After setting piston to the stroke timing, do i have to reset the timing marks again after advancing or retard the stator?

How to order mvt?

Frère c'est quoi la différence entre allumage mvt dd Booster et 103

can this Digital Direct charge the moped battery?

mvt dd19 vs dd06 Different?

Does that ignition coil have a light?🤔

Why messing with distances when you can go with degrees? Then it's the same no matter what engine size you have.

Hi there... Can it be that you forget you're woodruff key? I didn't see you set it back when you install the rotor. Or am I wrong?! Nice video! Greeting Mike

I ment u need a better pipe lol

I really can’t advise on this since I never touched a gtx and they are not really minarelli engines. Chinese knock offs are so mix match of parts that I don’t know which part would fit and which won’t. I know it’s not the answer you want to hear but honestly in my opinion it’s not worth the time. For me to get into detail of the 101 variables on jog/minarelli engines will be too confusing and since it’s not something I work on I wouldn’t know where to start. My suggestion to all those that message me Chinese clone motors is to leave it stock of it runs. Any modification and you are opening a can of worms money pit. You are more then welcome to try but I can’t really be of help. Sorry Mahalo for the acknowledgement of me knowing minarellis but I have no clue when it comes to the qmb line of motors “Okay bro, I messaged the local expert on minarelli engines and the above was his answer. “

Hallo i have mvt dd on my aerox now and i have folow all in your video and it dont work can you help me?

Hi, did you have problems that these ignitions get no spark or suddenly start missing and not reving?