Dewalt Power Washer Repair, No Pressure? No Problem - 5 minute fix! 

Dude, it's been sitting for 3 years and your vidio is up for 6. You the man!!

Whoa! This fixed my machine 😂 I was pulling into Home Depot to get it serviced. I saw this video and thought why not try it. And boom it’s fixed!!!!! You’re the man!!!!

I have a 3425 Dewalt Pressure washer about 3 years old this spring season. Started right up but no pressure. After checking user serviceable items I found your video, followed the directions and I'm back in business. Although I winterize my unit every year and it's garage stored I still encountered this issue. Thanks for the video.

Excellent, such an easy fix and less than five minutes. Thank you!

Thank you! This totally fixed our Dewalt 3000 psi pressure washer. Exact problem. Keep it up!

I can use this. I also liked it when your dog stepped in for a nod.

Thank you so much. I was about to pay to fix mine, and your video fixed it right up!

Having this exact issue. Great video. Good close up on what you were doing. Easy to follow. I wish all RU-vid fixit tutorials were like this

I wish I would have seen this sooner, might have saved me a few hours of frustration. I can’t thank you enough. FYI for others, my pin wasn’t stuck but taking it apart and reassembling it seemed to do the trick.

I have a 3400 Dewalt bought it last year used it once tried starting yesterday it would run for a min and backfire. i took carb all apart checked jet it was clean. Did a youtube search found you. Mine was just the opposite, factory setting screwed down to tight over pressuring pump & motor, took valve apart it was operating fine. left adjustment about where yours was, ran fine....thanks for taking the time

Thank you SOOOOOO much ….I have a Dwalt 3400 PSI , only used it may be 7-8 times, and today I got ready to power wash my side walk and driveway, it had no pressure, I am so glad I went online and after watching 4 videos, yours was the most relevant one that gave me the answer and it saved me at least $180 (according to the repair shop) , thank you so much again, you are a great blessing.

I was ready to junk mine until I saw your video. Works great. 10 minutes to find the tools and 5 minutes to fix. Thank you

Thank you so much. I was so frustrated and now it’s up and running again. You’re a life saver

I really appreciate the video. My 3200 quit having pressure yesterday and I about lost my mind, since it was practically brand new. Was afraid it could have been something expensive.

thank you friend , I have a back & decker 2600psi had the same problem !!! hugs from Brazil

Hey man a big thank you from down here in New Zealand. I thought my fairly new waterblaster had crapped out completely which was a real inconvenience at this time of the year. (its summer here). But i had a look on you tube for a repair and found your video and for the first time ever it all worked exactly as you said. Was an easy fix and its going fine. Thanks for your effort.

Excellent video. Just finished the fix on my Dewalt 3400 PSI pressure washer.

Thanks you just saved me time and money, took me about 10 minutes and it’s fixed 👍

Great video brother. Perfect fix!! Worked like a charm on my DeWalt 3400! 🤙🏼🤙🏼

dude, this worked. Awesome, took me about seven minutes, and I have full pressure again! I did exactly what you told me to do! I knew some wise person on RU-vid would have the answer!

Thank you!!!! You saved me hours of time, and possibly the expense of buying a new power washer.

Great video. Was about to take to the shop when I decided to check ole RU-vid. Low and behold you were dead on right! Saved me money! Thanks

Fixed my water flow issue right up. FYI the small nut on the stem is a 10mm and the big nut is a 7/8. Thank you much for your video

7 year old video, and it just saved me. Thank you!

Thank you so much! Just got a pressure washer for $200 because buddy said the pump was not working . Free fix! Pressure washer at 20% the price!

Thank you SO MUCH-fixed me right up. Laughing because my husband threw up his hands, but via your video instructions I got it going again!

Thank you for posting this video! I was about to buy a new $275 pump. This was the fox for my pump problem!!

OMG, I'm watching this with the audio off, but your Dewalt looks like it has the same pump as my SIMPSON, and now I know EXACTLY how to get at my unloader! You rock.

Thank you for sharing your videos and knowledge. Fix mine I was going to send it out.

Thank you!! I hope this fixes my lack of pressure. Love your dog. From NE WA.

This is a great post!! This is the second year we had to watch your video and fix the pressure washer again. Worked out great!! thank you so much!!

Super helpful, this solved my "no pressure" problem on 3600 psi DeWalt, I didn't have to remove the pin, just tap it to loosen and worked great again. Thanks!

Very helpful! I'm having pressure issues and I can't figure out why. Now I know! Gonna fix it right now! 👍🏾

great video. I've used it each of the past 3 years!

Great job, I'll be trying this tomorrow!

This is exactly what my problem was. Thanks for the help!!!!

nice vid bud ...i fixed 2 pressure washers after seeing this ...thankyou

Thanks, Billy! Gettin' My pressure washer adjusted to get to work. You da Man! :-)

Not all heroes wear capes. Thanks for the video sir! Glad I stumbled upon it. Now I know what to do just in case. I got the 3300psi

Thank you Billy I'm going to check my pressure washer out now

Great video, thanks for the help! Worked like a charm!

Thanks 🙏🏽 brothers saved me some money blessings to you an your loved ones

Thanks dude! I'm back to work.

Thanks. It got my pressure washer working again.

Did the same and works great. Thank you sir you are a life saver ❤. God bless you

So glad I watched, can't wait to try it.

Thank you so much! I didn't even take it apart. After watching this I just sprayed it with WD-40 then tapped it with a hammer and whala making pressure! Thank you!

Thank you very much sir I fix my own pressure washer because you did a good video

Thank you this is exactly what was wrong with mine Thing is brand new with only like 10hrs run time

Thank you. This was exactly the problem

Thx for the tip I appreciate it I’ll try check that on my pressure machine

Awesome video! Worked on my 3600 dewalt pressure washer also!

Life saver!! Thank you!

Thanks for your great video Bill, I will fix the same problem that you have showing on the video.

Thank you very much man!!!!! You just saved me a ton of money!!!

Thanks it worked !!! Awesome ..

Thank's I have the same Pressure washer worked great

Thanks a million...kind did the same thing !

Thank you, Billy!😀👍

Thank you ,for the video ,now I know how to fix mine 👍🏻👍🏻👏🏻

thank you so much, i fix mine 👍

Thank you for that video! That was the problem!

Thank you! You solved our problem!!

Boom! You saved another. Thank you.

Thanks fixed mine

only watched the first half of the video lol but thank you bout to give this a try cheers

This worked. Thank you!!!!

Thx for sharing!

Worked great. Saved me time and money.

5 min fix but have to watch 10 min video. Now a fifteen minute fix 😂. But anyway jokes aside, thanks worked a charm 👍

thank you very much, I was planning to took it the the repair chop, now I'm gonna try before,,,,,

Great job. Going to try it and if it works I'll let you know. This video is about 6yr old and so is my washer. Thanks Billy.

Thank you for this video! Just saved me $395 from repairman claiming I needed a whole new pump!

Would this be a good application for anti-seize on that valve? Thanks for the video!

Thank you so much. It worked.

It works greats and easy to do. Thank you

There is a pump preservative fluid that can be used when put away for the winter. Briggs and Stratton makes it. Check Amazon.

Thank you sir thank you very much had it at work and same problem bit the other guy I work with is a fake mechanic. Went bought brand-new one cause said it s broken but it's not anymore thank you again

Hi Billy. Well, I checked it and as you said the offloader was stuck. cleaned it up put it back together but unfortunately still no joy. Going to try (may part are obsoleted) and get a valve replacement kit, a new off loader (just in case) and see what happens. Anyway, thank for the great tip!

Gotta love RU-vid! Thanks. Great solution.

Very good teacher

Great fix.

You da man! It worked for me!

Your the Man I appreciate the video it saved me a lot of Money

My DeWalt has absolutely no pressure and it's been driving me crazy the same scenario I haven't used it in a while so maybe it's the same problem nice video thanks for the help

This fixed it. Thanks

Thank you 🙏 sir for your video you save me a few dollars.

Thank You 🙏🏼 you saved my day 🤝🏻

Good job thank you

thank you !!!

Thanks 🙏 men it works

Great!!! Thank you👍🏻

My dude! Thanks!

Helped me today

Mine is no pressure out of the box. I either have to wrench on it brand new or I need to get the gas out of it to return, think I will leave the oil in it.

Thank you 🙏🏼

Thanks Much!!

Absolutely an easy fix! Appreciate you taking the time to do this for whomever. Mine is a 3400 psi but same process. And it works. Thank you Sir!

its not under warranty. they call it a ware and tare part. mechanic has mine now (the 3400psi model) and is about to hit me with a bill for $120 to replace the valve. going to ask for the ild valve back now so i can see if that was my issue. my washer stopped giving amy preasure amd after a few taps to the pump i got half pressure with a choppy flow. worked fine to wash my house then an hour later i started it up at my fathers to clean his siding and thats when i started having issues. thanks for the info, good to know.

thanks bro