Тёмный

Diagnose A P0341 Code On VW Passat, Tiguan, CC, Jetta TSI/ CCTA 2.0 Turbo 2009 & Up 

Motorcarnut
Подписаться 35 тыс.
Просмотров 43 тыс.
50% 1

How to check if your cam position sensor ( P0341) is the cause of the code or something else.
❗️If you find this video helpful, I would appreciate a $uper Thanks that can be found below the video. Thank you!
❗️2.0 TSI Engine Serious Common Problems to Watch Out For on VW and Audi
• 2.0 TSI Engine Serious...
VW/ Audi 2.0 turbo 2008-2013 Timing Chain Tensioner Failure
• VW/ Audi TSI 2.0 turbo...
How to Replace Upgraded Timing Chain Tensioner on 2.0 TSI VW/Audi 2008-2014 engines
• How to Replace Upgrade...
What Does VW / Audi P130A Code Mean
• What Does VW / Audi P1...
What Causes VW P0087 Code - Fuel Rail/ System Pressure - Too Low
• P0087 Code On VW Tigua...
How To Diagnose A P2015 Code On VW
• How To Diagnose A P201...
How To Diagnose & Fix a P2440 Code on VW
• How To Diagnose & Fix ...
💰Save money on other VW / Audi repairs
Cranks But No Start? - VW Passat, Tiguan, GTI 2.0 turbo 2008-2013 - Check This First
• Cranks But No Start? -...
How To Diagnose & Fix a P2440 Code on VW / Audi 2.0 Turbo TSI 2008 & Up
• How To Diagnose & Fix ...
Timing Mark Alignment for Valve Train On 2.0 Turbo VW And Audi 2008-2015
• Timing Mark Alignment ...
Rear Main Seal Leak? Check This Easy Thing First - 2.0 turbo VW Passat, Tiguan, GTI 2008- 2014
• Rear Main Seal Leak? C...
💰Save money on your car/truck maintenance and repairs:
Don’t Get Stranded With a Dead Battery in Winter - Do 3 Top Battery Checks Now!
• Don’t Get Stranded Wit...
Top 3 Reasons Why Your Car Won’t Start
• Top 3 Reasons Why Your...
Don't let Timing Belt Failure Happen
• Don't let Timing Belt ...
Top 6 Gas Saving Tips
• Top 6 Gas Saving Tips ...
Look what happens when you neglect your engine oil
• Check and Change Your ...
Gas Pedal Sticks? Car Jerks? - Easy DIY To Make It Smooth & Safe
• Gas Pedal Sticks? Car ...
What Does An Exhaust Leak Sound Like? - And How To Find It
• What Does An Exhaust L...
Check your Engine, Coolant, Transmission, Power Steering Fluid, and Brake Fluids
• Check Your Car Fluid L...
Blown Head Gasket - Don’t Neglect Your Cooling System- Look What Happens
• Blown Head Gasket - Do...
What Does Engine/ Serpentine Noise Sound Like And What Does It Mean? - Squeaking & Squealing Noise
• Serpentine Belt Squeak...
Always make sure your lug nuts are TORQUED and not done with an impact gun
• Don't Use This When Ch...
How to diagnose and replace wheel bearing going bad on any car
• Whining, Grinding Nois...
Learn why the tire pressure is important and how to check it in your car
/ bm8wnjripj
Remove and replace Broken or Stripped Wheel Stud on most cars
• Broken or Stripped Whe...
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
• Cheap Way To Check For...
Fast and Easy Way to Restore Faded Car Paint and Scratches - With Minimal Tools
• Fast and Easy Way to R...
The Best Way To Fix & Repair Broken Wire in Your Car - Soldering Car Wires Together
• The Best Way To Fix & ...
Car Air Conditioning AC Not Working? - Diagnose And Maintain It At Home
• Car Air Conditioning A...
Replace Windshield Wiper Blades in 1 Minute
• How To Replace Windshi...
⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the future.
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.

Авто/Мото

Опубликовано:

 

11 окт 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 58   
@joebenda8461
@joebenda8461 6 месяцев назад
All the info I was looking for . Thanks for getting to the point so fast I had time to comment. 👍
@Motorcarnut
@Motorcarnut 6 месяцев назад
Should no problem, that's what the channel is about. Thank you!
@zfouda2004
@zfouda2004 Год назад
Thanks dude appreciate you
@Motorcarnut
@Motorcarnut Год назад
No problem, thanks for the comment
@andrewmankowski2301
@andrewmankowski2301 Год назад
Do you have a video replacing the vvt on the 2.0 TSI? Thank you!
@Motorcarnut
@Motorcarnut Год назад
Not yet, but will be making one shortly
@andrewmankowski2301
@andrewmankowski2301 Год назад
@@Motorcarnut thank you for taking the time to make these vids! Currently having an issue w my 2.0tsi. Has a diesel sound at idle here and there. Sometimes will sometimes won’t. Drives fine but kind of chokes at super low rpm. Pcv is fine, I got a p0341 camshaft sensor code but still need to check that. If it’s not the sensor I’m thinking it’s the magnet, or vvt🤷‍♂️
@Motorcarnut
@Motorcarnut Год назад
Was your timing chain tensioner ever replaced? If not, watch this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PqHAWsnhhqE.html
@andrewmankowski2301
@andrewmankowski2301 Год назад
@@Motorcarnut I would have to check. The sound sometimes happens at idle. Sometimes doesn’t and it’s relatively quiet. I did get the p0341 code so I should try by changing the can sensor but when the noise happens I can hear it from the timing chain area. It’s never consistent which I don’t believe it is the chain but I am not sure
@Motorcarnut
@Motorcarnut Год назад
A stretched chain will give you cam codes and the noise will come and go as well. I literally have 6 VW’s right now all with timing chain failure so keep that in mind.
@hernandonaire2484
@hernandonaire2484 Месяц назад
Hello, I have two codes popping up. P0011 & P0341, what would you recommend?
@Motorcarnut
@Motorcarnut Месяц назад
I have videos that cover both of these problems check them out. Probably cam bridge , tensioner etc.
@singhsarabjit
@singhsarabjit Год назад
Hello Sir. Greatly here appreciate you making this video. If there is oil in that sensor, can it make car not start?
@Motorcarnut
@Motorcarnut Год назад
Possibly or at least make the code come on.
@singhsarabjit
@singhsarabjit Год назад
@Motorcarnut thank you. I recently started working on cars. I have 2012 volkswagen tiguan 2.0L with same code and not starting. It died while driving on the highway. Customer towed it my shop. There was no oil on dipstick. I put oil but no luck. Thinking should I even mess with it or pass on job.
@Motorcarnut
@Motorcarnut Год назад
Is it cranking smooth like no compression? Or is it normal cranking? Because those engines are notorious for timing chain tensioner failures that will give you that code. I have many videos on this vehicle,
@singhsarabjit
@singhsarabjit Год назад
@@Motorcarnut yes. Sounds like no compression. Thank you
@Motorcarnut
@Motorcarnut Год назад
Yep, timing chain jumped a bent all of the intake valves, I bet.
@angelsamaniego781
@angelsamaniego781 7 месяцев назад
would the crankshaft pop up the p0314 code as well?
@Motorcarnut
@Motorcarnut 7 месяцев назад
You mean P0341? Possibly but on these engines it’s probably the timing chain tensioner or oil control s.
@hectorsuarez9429
@hectorsuarez9429 Год назад
Hello, I have a 2014 jetta, in which city are you located?
@Motorcarnut
@Motorcarnut Год назад
New York for now
@laiyuling5699
@laiyuling5699 3 месяца назад
hi 👋 im currently having a issue in my passat 2012 model with exactly p0341 code. i just changed it timing set ,selenoid and the camshaft and crankshaft sensor and more ....in last month and its still having the code sometime .Moreover when i drive smoothly the engine run smoothly but when i need to pick-up my speed ,around 2000-3000 rpm the engine will jump or misfire???i dont know but i feel the engine twich while i speed up the engine
@Motorcarnut
@Motorcarnut 3 месяца назад
Can be many things like the oil control valve, cam bridge chain tensioner etc. I have videos on all of those.
@laiyuling5699
@laiyuling5699 3 месяца назад
​​@@Motorcarnutany others because all these have been replaced 💆😂
@dorianeusebio2394
@dorianeusebio2394 2 месяца назад
Have you checked your spark plugs? Sometimes that can cause misfires as well as the same code
@Motorcarnut
@Motorcarnut 2 месяца назад
@dorianeusebio2394 true but on these engines it’s pretty common
@laiyuling5699
@laiyuling5699 Месяц назад
​@@dorianeusebio2394replaced already
@kywildcats941
@kywildcats941 9 месяцев назад
i reppaced the sensor but keeps happening any info and they car dose not like to start when hot
@Motorcarnut
@Motorcarnut 9 месяцев назад
Car probably jumped timing. Have many videos on vw just check them out on my channel
@kywildcats941
@kywildcats941 3 месяца назад
My car jumped timing took to local Euro shop , did a scope said was dmg they put in a used engine nd a timing kit they supplied. . Pretty much ever since then it has had the p0341 code with rpm drop and stutter along with epc flashing . And when it's up to operational temperature and you turn the car off it dose not like to start . Now of the timing is still messed up now hoe dose it run and drive okay ??
@kywildcats941
@kywildcats941 3 месяца назад
Please try to reply man I been scratching my head for awhile with this car had people look at it idk .. thr shop all rdy fucked me outta alot of money no paper work with the used engine no nothing I don't even know how many miles is on the engine now . I still drive the car to this day it just some times has that stutter rpm drop epc flash please help .
@Motorcarnut
@Motorcarnut 3 месяца назад
@kywildcats941 no bring it back to get fixed the proper way before it gets worse
@Motorcarnut
@Motorcarnut 3 месяца назад
@kywildcats941 just responded
@luiz220989
@luiz220989 4 месяца назад
I have this error p0341, my car is a 2013 Jetta, when the car is hot it fails at low speeds and makes noise in the valve control part, if I disconnect the magnet, the noise and the failure disappear, could it be a problem with the magnet?😊
@Motorcarnut
@Motorcarnut 4 месяца назад
Probably the oil control valve is broken. I have videos on that particular problem
@luiz220989
@luiz220989 4 месяца назад
I dismantled the magnet and noticed that the oil valve shaft is not out as you showed in your other video, the valve shaft is parallel and not out.
@Motorcarnut
@Motorcarnut 4 месяца назад
Cam bridge? check it have a video on that too.
@cristiannahuelvila3157
@cristiannahuelvila3157 5 месяцев назад
Tengo este error p0341 y en caliente solo bien caliente se escucha el variador como que se descarga y se acomoda rápido . A veces tira epc o testigo presión aceite . Por donde puedo buscar ? Tapa de cilindro nueva , puente nuevo distribución nueva
@Motorcarnut
@Motorcarnut 5 месяцев назад
Timing is probably off due to tensioner failure. I have other videos to see if you have old or new tensioners
@cristiannahuelvila3157
@cristiannahuelvila3157 5 месяцев назад
@@Motorcarnut hola me hicieron hacer la tapa de cilindros nueva por rayas , levas nuevas , distribución nueva , cojinetes nuevos , balanceadores nuevos pero genéricos
@Motorcarnut
@Motorcarnut 5 месяцев назад
Then can be oil control valve or cam bridge, I have videos on both
Далее
How to diagnose P0341 on a 2009 VW CC
6:37
Просмотров 132 тыс.
HOW TO TEST CAMSHAFT POSITION SENSOR ON A CAR
5:24
Просмотров 842 тыс.
Top 5 Failures ~ Volkswagen Tiguan
10:28
Просмотров 407 тыс.
СЛОМАЛИ ДЕФЛЕКТОРА НА BMW X5
0:32