Diagnose A Code P0016 On VW Passat, Tiguan, CC, Jetta - TSI/ CCTA 2.0 Turbo - 2009 & Up

Подписаться 35 тыс.

Просмотров 29 тыс.

50% 1

P0016 - crankshaft position camshaft position correlation bank 1 sensor 8
This code will cause multiple misfires, check engine light, EPC light, hard starting, long crank time or no starting, long crank time, or no starting. All related to P0016 code, often misdiagnosed.
❗️If you find this video helpful, I would appreciate a $uper Thanks that can be found below the video. Thank you!
What Causes VW P0087 Code - Fuel Rail/ System Pressure - Too Low
• P0087 Code On VW Tigua...
How To Diagnose A P0341 Code On VW
• Diagnose A P0341 Code ...
How To Diagnose A P2015 Code On VW
• How To Diagnose A P201...
How To Diagnose & Fix a P2440 Code on VW
• How To Diagnose & Fix ...
What Does VW / Audi P130A Code Mean On TSI/ CCTA 2.0 T Engine
• What Does VW / Audi P1...
💰Save money on other VW repairs:
• VW & Audi Repairs
💰Save money on your car/truck maintenance and repairs:
Don’t Get Stranded With a Dead Battery in Winter - Do 3 Top Battery Checks Now!
• Don’t Get Stranded Wit...
Top 3 Reasons Why Your Car Won’t Start
• Top 3 Reasons Why Your...
Don't let Timing Belt Failure Happen
• Don't let Timing Belt ...
Top 6 Gas Saving Tips
• Top 6 Gas Saving Tips ...
Look what happens when you neglect your engine oil
• Check and Change Your ...
Gas Pedal Sticks? Car Jerks? - Easy DIY To Make It Smooth & Safe
• Gas Pedal Sticks? Car ...
What Does An Exhaust Leak Sound Like? - And How To Find It
• What Does An Exhaust L...
Check your Engine, Coolant, Transmission, Power Steering Fluid, and Brake Fluids
• Check Your Car Fluid L...
Blown Head Gasket - Don’t Neglect Your Cooling System- Look What Happens
• Blown Head Gasket - Do...
What Does Engine/ Serpentine Noise Sound Like And What Does It Mean? - Squeaking & Squealing Noise
• Serpentine Belt Squeak...
Always make sure your lug nuts are TORQUED and not done with an impact gun
• Don't Use This When Ch...
How to diagnose and replace wheel bearing going bad on any car
• Whining, Grinding Nois...
Learn why the tire pressure is important and how to check it in your car
/ bm8wnjripj
Remove and replace Broken or Stripped Wheel Stud on most cars
• Broken or Stripped Whe...
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
• Cheap Way To Check For...
Fast and Easy Way to Restore Faded Car Paint and Scratches - With Minimal Tools
• Fast and Easy Way to R...
The Best Way To Fix & Repair Broken Wire in Your Car - Soldering Car Wires Together
• The Best Way To Fix & ...
Car Air Conditioning AC Not Working? - Diagnose And Maintain It At Home
• Car Air Conditioning A...
Replace Windshield Wiper Blades in 1 Minute
• How To Replace Windshi...
⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the future.
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.

Авто/Мото

Опубликовано:

15 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 170

@Trouttdawg 5 дней назад

FIXED our problems! "Thanks" Donation sent. Thank you so much for putting this out there for everyone!

@Motorcarnut 4 дня назад

Hey! Thank you very much for the donation ! Sure glad it helped!

@Trouttdawg 4 дня назад

@@Motorcarnut Hey, after we drove the car about 50 miles, had the same issue happen when we started it this morning. Looks like the new VVT oil control valve has already popped out (Dorman brand). We bought the car about 8k miles ago from a VW tech who had rebuilt the engine completely, do to a timing failure. We've had a camshaft position sensor code since we bought it, but tech said it was from the ECM being replaced during rebuild and not to worry about it. Could it be that he didn't get the timing right or possibly it has skipped a tooth, or could the Dorman unit just be a POS and I should go OEM? Could it be the Cam Adjuster Magnet (the pin is moving in an out decently). We replaced the Cam Position Sensor to no avail. I'm guessing it would be the same with the Crankshaft Position sensor. Definitely ran flawlessly for about 50 miles last night, then back to square 1 this morning. Thank you sir!

@Motorcarnut 4 дня назад

@Trouttdawg no it’s probably nothing electrical, remove the solenoid and see if the oil control valve popped out again. Let me know.

@camarobossman 10 месяцев назад

This is extremely good information...... Thanks for the lesson on how the cam magnet works and the part that comes out that controls the flow of oil never knew how this all worked. Thanks!!!

@Motorcarnut 10 месяцев назад

Very welcome! Thanks for the feedback!

@gee3883 5 месяцев назад

Great vid, nothing more valuable than a man full of knowledge who knows his job.

@Motorcarnut 5 месяцев назад

Thank you bro really appreciated!

@tedjohnson64 3 месяца назад

This EA888 content is “chef’s kiss”, thanks for sharing!

@Motorcarnut 3 месяца назад

Glad you enjoy it!

@Fryxr6T 7 месяцев назад

Thanks heaps mate, this video saved me a lot of time and money with my VW Passat D0016 code, you legend 👍🏻

@Motorcarnut 7 месяцев назад

Awesome, glad to hear that and thanks for the feedback!

@mjshuja1948 10 месяцев назад

I am almost 80 yers live all my life US🇺🇸🇺🇸🇺🇸🇺🇸🇵🇰🇵🇰🇵🇰🇵🇰i work on German cars only my son drive modified AMG,YOU ARE VERY KNOWLEDGEABLE 👍👍👍👍👍👍👍

@Motorcarnut 10 месяцев назад

Thank you! Really appreciate the feedback!

@awosunle0luwatobiloba66 6 месяцев назад

Wow thanks you so much mine has maf sensor, knock sensor, fuel pressure sensor, cmp sensor, multiple cylinder misfiring, but it start but shot off after running for 2 minutes by itself 😢 but I will do it as you just explain now ty .

@Motorcarnut 6 месяцев назад

No problem, good luck!

@Zok1990 9 месяцев назад

Ty for that info it helped me a lot

@Motorcarnut 9 месяцев назад

No problem, glad it did. Thanks for the feedback!

@johnsavioli316 6 месяцев назад

Very good advice in this video. Mine acted up after a routine oil change. Still not sure why. But sure enough it was that control valve. Thank you.

@Motorcarnut 6 месяцев назад

Sure, no problem. Thanks for for feedback.

@phtevenchevas3960 5 дней назад

I'm having the exact same issue, happened right after an oil change!

@johnsavioli316 5 дней назад

@@phtevenchevas3960 It was a pretty easy fix once checked.. Mines running fine since.

@christianvogel1012 27 дней назад

Thank you so much very helpful

@Motorcarnut 27 дней назад

You're welcome!

@randygrant56 4 месяца назад

Ok so good news is i was able to look at the part, it’s still pushed in, it’s not pushed out. It had a lot of oil around it so i cleaned the oil away (didn’t replace the part) and now i get p000A and p0011

@Motorcarnut 4 месяца назад

I have fixes on those codes too, look in my channel contents

@guerrybeauchamp2351 7 месяцев назад

Thank you so much Sir

@Motorcarnut 7 месяцев назад

Most welcome, appreciated!

@brentstealy3678 2 месяца назад

I can already tell you you have helped me and I still am trying to get stripped torx bolt off I think that's why it hadn't been changed !! Thank you I couldn't find where the oil was coming from now I know ? Friken awesome 👌

@Motorcarnut 2 месяца назад

Awesome! Really appreciate the comment!

@kevinrouth8082 28 дней назад

Thank you Sir, appreciate you

@Motorcarnut 28 дней назад

You are very welcome!

@ivanvega2821 10 месяцев назад

Great video! I’m having this code on my 2010 Passat CC. Recently inspected what you mentioned and mine is flush not protruding like the example you gave. Car turns on but runs really rough at idle. Any suggestions would be appreciated!

@Motorcarnut 10 месяцев назад

Ok, I bet the ball valve in the cam cradle blew out. Or do you know if the timing chain tensioner was ever replaced? Is this the only code your getting?

@Trouttdawg 5 дней назад

Thanks!

@Motorcarnut 4 дня назад

Very much appreciated!!!!

@randygrant56 4 месяца назад

Hey love the video and it may have answered this question but just want to make sure, i have a 2012 vw cc lux and the code im getting are p0016 and p0506

@Motorcarnut 4 месяца назад

The P0505 is probably because of the timing and P0016 code

@randygrant56 4 месяца назад

Got it, thanks

@Motorcarnut 4 месяца назад

@randygrant56 no problem

@randygrant56 4 месяца назад

Do you know of a way to get the top screw off because where i put the bit in, it won’t turn i got the other two off but that one won’t come out

@beckmarchiniak716 2 месяца назад

@@MotorcarnutI have p0016 and p2293 at the same time, have you seen this before?

@user-ni4py2ds5e 5 месяцев назад

Good evening, thanks to your videos I have dared to do things to my Tiguan with a 2.0 TSI engine, I have a question, how can I check the 2 parts you talked about? Because I already checked the solenoid and at first glance it doesn't seem to have any problems. Thanks in advance. Greetings

@Motorcarnut 5 месяцев назад

Did you take the solenoid off to see if the oil control valve button is sticking out?

@alialgharibawi9647 Месяц назад

Thank you so much for the video. It is very helpful to understand what's going on. Specially, when you explained the symptoms of the car that has the p0016. I have question; I have the p0016, p0106 and p2271 on my 2.5 2012 Passat. Are these codes related to each other? I have replaced the sensors and the solenoid valves lately and still p0016 and bad performance. the car stated to burn a lot more gas is it because the p0016? thanks again for your helpful videos.

@Motorcarnut Месяц назад

Thank you! Valve timing itself can be off. Has to be checked.

@alialgharibawi9647 Месяц назад

@@Motorcarnut Thanks for your reply!

@Motorcarnut Месяц назад

@alialgharibawi9647 sure 👍

@himeedajew 16 дней назад

Thanks for the info! Is this also indicative for the 2.5?

@Motorcarnut 15 дней назад

The code and it’s symptoms are

@chinofrm49th66 9 месяцев назад

I gotta 05 Touareg and i had this code amongst those other misfire codes and maf sensor codes...it cranks but no start what do you think?

@Motorcarnut 9 месяцев назад

Check valve timing and cylinder compression first.

@coyotte8030 Месяц назад

Great video and explanation - thank you! I have the exact symptoms you are describing on 2009 VW CC. I just removed camshaft adjuster magnet and looked at the oil control valve but in my case it looks like it is flashed at the bottom similar to how the parts are shown at the dealer website. I am getting P0016 and right now the car won't even start after cranking for 10-15 seconds. Do you any other suggestions?

@Motorcarnut Месяц назад

Yes it can be the cam bridge, check out my other videos on how to replace it, little more involved but not bad. Good luck!

@coyotte8030 Месяц назад

@@Motorcarnut Awesome, will do - thank you for reply!

@Motorcarnut Месяц назад

@coyotte8030 no problem

@Teledowny 6 месяцев назад

My 2014 Jetta Se is currently throwing this, p0341, with check engine light and noisy engine while accelerating, any idea if it’s just the sensor? Local shop quoted me 120 diagnostic when I have my own reader

@Motorcarnut 6 месяцев назад

I have a video on that particular code. Probably not the sensor but timing chain problem. m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Wf3j0cBnGwM.html

@tpdtopcop2010 Месяц назад

I have a 2016 with 1.8 TSI with same codes. Could this part your talking about in this video be for my engine as well?

@Motorcarnut Месяц назад

Yes it can

@JKILLZ9731 6 месяцев назад

I am having the same problem, but the only difference is the piece that is help regulate. The oil mines is fine. The button is not pushed all the way out but when I took the cap off there is oil leaking out. Should I just replace the whole thing?

@Motorcarnut 6 месяцев назад

Oil is supposed to be in the oil control valve. You may have a cam bridge check valve problem

@mpho1247 3 месяца назад

Thanks for the vid, much appreciated. 2.0 tfsi Audi CJEB engine. Chain was rattling and replacement was done. I had some Throttle and MAF correletion DTC, replaced PCV valve and it went away. After that cleared, now I'm getting a P0016. Engine performance is fine and one kick start. Sometimes it has an erratic/misfiring idle and once I rev it a little, that goes away. The intake and exhaust cams both use cam adjuster valves. Previous repair shop stripped off an oil strainer on one of the valves, meaning that one valve has a strainer and the other does not. Could this cause oil pressure differences between the two cams and affect the timing setup? Hence the P0016?

@Motorcarnut 3 месяца назад

Can be yes also oil control valve and cam bridge check ball are known to cause those problems. Got videos on them as well.

@mpho1247 3 месяца назад

@@Motorcarnut Ohk thanks. My bad, it's a 1.8t, not a 2.0. Anyway this cam bridge doesn't have a check ball. This was just a budget backyard repair and the car owner uses it daily. Once I get access to the car I will just remove the other strainer and see if the error goes away.

@Motorcarnut 3 месяца назад

@mpho1247 oh ok let me know if it fixed it

@mpho1247 3 месяца назад

@@Motorcarnut Certainly.

@mpho1247 2 месяца назад

@@Motorcarnut I ended up pulling out the engine because of excessive oil consumption. So I replaced the piston rings and the two oil control valves. No more DTC's now..im pretty sure the problem was the missing strainer/screen.

@teresajudd3146 7 месяцев назад

I have a 2014 Volkswagen Passat Pride starting it it wouldn't start replaced battery and it started but it was making a small grinding sound sound at the beginning of starting took it to the mechanic he said it was the solenoid replaced it doesn't work now he's saying something about the cam timing chain still haven't been able to find the issue any ideas of what I can do next

@Motorcarnut 7 месяцев назад

Can be a lot of things that control the valve timing such as the cam bridge check ball, the oil control valve that the solenoid controls or a bad tensioner.

@MarteenE30 15 дней назад

What should you do if the code comes back? I’m stuck on this one. 2009 VW Passat with the code P0016. At first it ran fine and once I turned the car off and back on the check engine light and same code came back.

@Motorcarnut 15 дней назад

Just answered

@joelhiebert3129 9 месяцев назад

You must be a genius. Let’s just say I wouldn’t have found that if my life depended on it. Also this is following using your head removal video to fix carbon build up on intake valves and also had slightly bent valves. Which what would of took you a couple hours, took me days to complete. Then just to fire it up and have it run like it did before which was crap. Misfiring like crazy. So I got the codes, searched them up and it led me right back to you lol. And sure enough that little “dong” was sticking right out. So I’m hoping and praying that solves it. 2 days from rock auto and it should be here. At first I thought too, oh maybe it’s my coil packs or sensor I forgot or something or maybe dare I say if, I had the timing wrong... So I tried to diagnose but every cylinder was mis firing according to my scan tool. Anyways long story short. Thanks for the major help! God bless!

@Motorcarnut 9 месяцев назад

Thank you so much for the write up, Yes that should solve your misfiring problems. If the oil control valve fails the computer can't control valve timing and it will misfire. Let me know how it works out!

@joelhiebert3129 9 месяцев назад

She runs like a gem now, perfect. That’s crazy that little mechanical piece can cause so much issue. Also have you ever tried to fix it by hitting the centre of that valve back in? I took my old one and tapped it back in and it just popped right back where it’s supposed to be? I still have a new one but might work for temporary purposes.

@Motorcarnut 9 месяцев назад

@joelhiebert3129 I wouldn’t play around with the old one, it’s a precision piece and can make things worse. Glad she’s running properly. Thanks for the update and good luck!

@dagneralenaguerra2095 4 дня назад

I have a 2016 Volkswagen Tiguan with the same starting problem and code P0016. What model can I buy?

@Motorcarnut 4 дня назад

Just fix yours if it's a nice vehicle, they all have problems but once fixed there great vehicles.

@matthewmartin3661 2 месяца назад

Would I need to replace a gasket around the solenoid if I do this repair?

@Motorcarnut 2 месяца назад

Not if it’s not ripped

@jeqwanwilliams4839 7 месяцев назад

im having this same p0016 code on my dodge magnum. I changed both sensors and still throwing the code. Can you assist me with some information pleaser

@Motorcarnut 7 месяцев назад

It’s common on your vehicle to jump timing. So I would start there and check to see if valve timing mechanically is correct.

@user-rf6rf5ul6p 2 месяца назад

Thrown codes im getting are P0016 and P0011. Could this fix both, or two different issues?

@Motorcarnut 2 месяца назад

Yes, if not could be this: m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TdBiepLv8Vw.html

@roygutierrez1578 4 месяца назад

I’ve seen in other videos that I have to stop the crankshaft from moving because taking off the oil control valve and putting it on may affect with the timing, is that something I should be worried about when screwing in the new oil control valve

@Motorcarnut 4 месяца назад

Not true

@seamus205 2 месяца назад

When i attempted to install mine my cam jumped time. It could be because the chain was already bad but i would be very careful with replacing this part. When i attempted to do the oil control valve i did more harm than good. I need an engine now...

@Motorcarnut 2 месяца назад

@seamus205 It jumped because chain tensioner is bad. You don’t need a new engine, just have to replace tensioner redone timing and oil control valve. I have videos on all of those things!

@seamus205 2 месяца назад

@@Motorcarnut it jumped by like 5 or 6 teeth. I haven't run the engine obviously, since i knew it jumped right away. You dont think it bent valves when it jumped?

@Motorcarnut 2 месяца назад

Yes, but that doesn’t mean you need a new engine?

@sulla9528 10 месяцев назад

What is the name of the part you replaced? any link to buy it from?

@Motorcarnut 10 месяцев назад

It’s called a oil control valve, look on Amazon with your year and model. You’re going to need a special tool as well.

@brendaavila435 6 месяцев назад

We took out the 3 screws and removed the front piece.. the pin comes out but once we removed it we notice a good amount of oil was out is that normal or should it be dry?.. also the solenoid middle button looks flushed like you said it should be.

@Motorcarnut 6 месяцев назад

The oil is normal and correct the button should be flush.

@brendaavila435 6 месяцев назад

@Motorcarnut we got that p0016 code can it be anything else.. my car won't start after that code

@Motorcarnut 6 месяцев назад

@brendaavila435 if you still have the old timing chain tensioner it could of made the timing jump. I have many videos on that as well. Can search VW on my channel

@brendaavila435 6 месяцев назад

Thank you so much I'll give that a check..

@brendaavila435 5 месяцев назад

Hi.. so we took the car to the dealer and they are saying that I have to replace the head gasket and timing chain.. do you think they are being honest?

@86Ovca 11 дней назад

Would you know if the 2012 Golf 118 tsi is related to the same issue. I get the same code, but it goes on and off

@Motorcarnut 11 дней назад

Yes codes are related

@86Ovca 11 дней назад

Thank you

@Motorcarnut 10 дней назад

@86Ovca welcome

@edreessalju9584 4 дня назад

Can any body show me the location of the same valve for WV Jetta 2012 s 2l. Thx

@iferuzx 8 месяцев назад

Hi HELP!! Hi Checking zero compression measurement with p0016 activated I will have to check the head, the fault occurred when cold

@Motorcarnut 8 месяцев назад

Probably bent valves if timing chain tensioner wasn't replaced. Have many videos on the issue you may want to check out.

@cesarrubio6455 4 месяца назад

Will it work the same with a V6 passat?

@Motorcarnut 4 месяца назад

Similar

@clarkbreen4634 9 месяцев назад

What is the name of the tool you mentioned?

@Motorcarnut 9 месяцев назад

Look up VW Oil pressure valve tool

@ewan6578 16 дней назад

Ive got p0016 on a vw ea111 twincharged engine..any leads??

@Motorcarnut 16 дней назад

Different engine but same code should be same diagnostic procedure

@ewan6578 15 дней назад

Long cranking..random misfires..same symptoms..😢

@Motorcarnut 15 дней назад

Yes it’s probably an oil control valve problem

@hoottaway 3 месяца назад

Can I get a link to the replacement parts for 2014 Jetta?

@Motorcarnut 3 месяца назад

What part?

@ivanvega2821 9 месяцев назад

If the solenoid control valve is flush and still have p0016. Is there valve damage? On cold engine dry compression test all cylinders are at 90psi. Is that good or bad??

@Motorcarnut 9 месяцев назад

No valve damage because of oil control valve. 90 psi in all cylinders is ok for a cold engine. I would check the cam cradle oil check valve, a lot of times they become loose and create your problem

@ivanvega2821 9 месяцев назад

@@Motorcarnut I just took off the cover to see the tensioner. I stuck a small flathead and was able to compress the tensioner easily. As far as my understanding, that shouldn’t be able to be that easy to compress the tensioner. Also, tensioner is the old common failure tensioner. Uffff hahaha

@Motorcarnut 9 месяцев назад

@ivanvega2821 Yes, Unfortunately. I bet it jumped a tooth and that’s your whole problem right there and with the compression readings you probably didn’t bend the valves which is a good thing. I have all kinds of videos to help you do the timing chain tensioner yourself.

@ivanvega2821 9 месяцев назад

@@Motorcarnut if I could take a picture of what I already have off of the vehicle. You would be proud! Thank you so much for your knowledge transfer. I’m having a heck of a time taking off the motor mount bracket hahahaha

@Motorcarnut 9 месяцев назад

Thank you!! I bet I would! Yes the bracket lower bolts are triple square and very close to the frame rail. I cut the socket bit short to get to the lower rear bolt and used a 13 mm wrench on the bit to get them loose.

@jersey2k303 3 месяца назад

What do you torque the part to

@Motorcarnut 3 месяца назад

What part?

@nequanlucas2162 Месяц назад

I just did a timing chain job on my mk7 gti and got this code but I made sure everything was aligned. My car starts up just fine engine sounds normal so I’m confused

@Motorcarnut Месяц назад

Can be the cam bridge. Sounds like an oil timing pressure problem.

@WesleyMadai-tp5yp 28 дней назад

Hi same problem.... I have changed everything I can think of.. I am starting to think diagnostic machines is missleading us and we looking in the wrong places 😞 Any1 here who has sloved for the P0016 code because it is breaking our pockets (golf 7 gti 2013 model... 🤧

@Motorcarnut 28 дней назад

@WesleyMadai-tp5yp You have to understand how something works in order to fix it. And not just throw parts at a problem. What did you do so far? And did you watch my videos ? I have many on this situation

@WesleyMadai-tp5yp 27 дней назад

Oil control valve 😝 plz come bck and let me know that da error code did not come bck

@WesleyMadai-tp5yp 27 дней назад

Thank you I am sorted.... was da "oil control valve" 😄

@amiebernas197 23 дня назад

My VW Jetta says it has a VVT solenoid not an oil control valve. Are they the same thing?

@Motorcarnut 22 дня назад

No, the solenoid controls the oil control valve

@amiebernas197 21 день назад

When I went to look up the part for the oil control valve it says there isn’t one for my 20-6 Jetta GLI SE

@Motorcarnut 20 дней назад

Then you have an oil control solenoid it’s 2 in one

@Edwin_VR 4 месяца назад

Could this possibly fix p0017? Or is that something different?

@Motorcarnut 4 месяца назад

Yes they are related

@Edwin_VR 4 месяца назад

@Motorcarnut where is it located on the v6 can't find it?

@Motorcarnut 4 месяца назад

@Edwin_VR This video is on the 2.0 Turbo not the V6

@Edwin_VR 4 месяца назад

@Motorcarnut yeah I know, but do you happen to know where it would be on the v6?

@GG-GODZILLA91 5 месяцев назад

I have Volkswagen passat 2014 p0011

@Motorcarnut 5 месяцев назад

Try this: m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TdBiepLv8Vw.html

@tpdtopcop2010 Месяц назад

Mine looks like there is a hole with nothing to push.

@Motorcarnut Месяц назад

Then it’s no good

@mlwiggy Месяц назад

What is the part #?

@Motorcarnut Месяц назад

I don't know what you are referring to?

@mlwiggy Месяц назад

@@Motorcarnut nevermind i found it👍🏼

@user-sn7yr1ql8c 6 месяцев назад

Hey mate what’s the part number?

@Motorcarnut 6 месяцев назад

For what? The tool or the oil control valve?

@user-sn7yr1ql8c 6 месяцев назад

Oil control valve mate. Legend appreciate the fast reply! Would you happen to know the 2012 Tiguan 1.4 litre vvt solenoid part number?

@Motorcarnut 6 месяцев назад

You can look up the part numbers here, then search them online for the best prices. vw.oempartsonline.com

@Motorcarnut 6 месяцев назад

And search with you vin number for exact part for your vehicle.

@histruth3157 25 дней назад

what is the name of the part ???

@Motorcarnut 25 дней назад

Oil control valve

@histruth3157 25 дней назад

@@Motorcarnut thanks, why would my EPC light turn off and on so intermittently. It will go on and then then next couple days come back on but initially it was a p0016 so will change that

@Motorcarnut 25 дней назад

Valve could be sticking causing the intermittent problem

@histruth3157 24 дня назад

@@Motorcarnut is it ok to drive then, the lights have been off for a couple of days now