UPDATE- Hey guys, thank you for watching this video...if this has helped you out in any way please SUBSCRIBE, press that LIKE BUTTON and leave a COMMENT. Please check out these links that may SOLVE YOUR NO START ISSUES. amzn.to/3tvM0jd amzn.to/3xUrWKX amzn.to/3uuLxiA amzn.to/3erjviy Analyze your car issues and ERROR codes and clear them with this Amazingly accurate yet inexpensive OBD2 SCANNER- amzn.to/33rovxg Wireless Scanner amzn.to/3nYbjtb Test your Battery and Alternator amzn.to/2QWtGCU If you would like to help this channel, your donations are appreciated. Cashapp- $PeterLCG Venmo- PeterLCG THANK YOU
lights and everything worked but the engine wouldnt turn over....checked everything, even the stuff that has nothing to do with the start process, changed starter and she works beautifully now!
I've been hearing lots about this issue, the truck stutters and loses power because the PCM or computer is fautly or going bad. This command center is not relaying correct sequence of information to the vehicle to operate at full functioning capability, thus you would need a replacement PCM with upgraded firmware, these explorers were made with a bad PCM that goes out halfway through its engine life
Good detailed video. But to long. You should of just listed everything to rule out. Instead of telling us about exactly what you did to diagnose it to be the starter. But other than that info
At least I watched this dude’s other video first and only wasted sixteen minutes of my life instead of twenty-two, eh. Some unsolicited advice here, Peter L: pare down the part of your story about “my car won’t start” to maybe 20-30 seconds tops and then go into detail about what, precisely, the problem was and how you fixed it. These are not helpful videos bro.