Diamond Willow Thunderstick

Подписаться 52 тыс.

Просмотров 12 тыс.

50% 1

Fractal or lichtenberg wood burning a diamond willow walking stick. This burn turned out to be amazing. The way I did it turned out to be a pleasant surprise. The best stick burn EVER! How to make a.
Disclaimer:
Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Опубликовано:

20 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@kylehill3068 Год назад

9:36 🤣 Amazing work man!!

@RustBeltAuto Год назад

It were fun too.

@neshawalz341 Год назад

Fantastic idea

@russelldavis2476 Год назад

Nice job, I appreciate how you fracture burning people don't realize the danger involved. You mentioned how the burn lifted. Scrub the hell out of it under running water to avoid that. I think the finish product will make you happy. You really can't Scrub them to much

@rickybeltz332 Год назад

Cool thunder stick.

@mrs.yelloweagle 8 месяцев назад

By the end of the video l was more interested in your hair! Beautiful ❤nice job on the stick too!

@RustBeltAuto 8 месяцев назад

What a nice thing to say 😁

@drunkwoodswyllia4885 Год назад

That’s bad ASS brother!!

@theeclecticnurse2485 2 года назад

Awesome ❤❤❤. Now I am really here for the crystals! This was what my idea was!

@RustBeltAuto 2 года назад

Yes! I did another one with a crystal cluster. Carved it in, and wrapped it with leather. Looks really cool.

@KrustyDebris 2 года назад

Nice china collection.

@RustBeltAuto 2 года назад

#ThingsmadeinChina?

@donaldmcdaniel1773 2 года назад

Very interesting

@NorthSpider 2 года назад

That was amazing. It almost looked like it was made out of some sort of marble. Job well done I would say.

@albertreed966 2 года назад

YEAH, I like it too! I hope someday to get up there from Florida and be as lucky as you to find a stick that's that straight!

@JoelMMcKinney 2 года назад

I like that you made it yours. excellent willow specimen, artwork, and craftsmanship.

@RustBeltAuto 2 года назад

Show off points :). It sits in my living room, and looks pretty.

@richardmapp7276 Год назад

What r u using for a power source

@RustBeltAuto Год назад

Im using a neon light transformer with a regular power source. It was a beer light.

@stormbringer_7774 3 года назад

I wish I was your neighbour dude!😂👍☘️ Love your work sir

@brucewrandol 3 года назад

You need to try super glue in place of the Varathane. Amazon has 4-8 oz bottles. Used rubber gloves in a WeLl vEnTiLaTEd area. It does dry quick but I have used it and it dries hard to a shiny surface. Use a lint free rag like a t-shirt rag. Put it on as thick as possible. It does come in different viscosities and I like the thick viscosity.

@joejoyce9519 4 года назад

That is indeed a beautiful staff. Worship I could get something like that in the UK.

@RustBeltAuto 4 года назад

People sell them blank on Etsy, and Ebay all the time.

@johnf.4206 3 года назад

I love this. Diamond Willow is beautiful and my preferred for making walking sticks, and your narrative is golden. Hope to see more videos. "This is where I need to think about Death" love it.

@newalla344 Год назад

You need to take this video on hold for a little while. Tell people not to use a micro wave transformer and use a oil burner transformer as the will hit them like a weed burner elect. fence. I have done a lot of this and you need to look at some videos about the safety. I really like the videos on diamond willow you tube. Yes people have been killed using this, always tell people not to do this. It looks like you are using a neon sign transformer to burn with. most new neon and will not work as they have a safety so you can't short them out. keep up the great work and be around for a long time. The way you are doing it will knock you on the floor but you should live. If you think I am wrong I will take this down.

@RustBeltAuto Год назад

I do not recommend anyone doing this kind of work, and YOLO my way through life. It is low value, and there is no downside to my death.

@cheypam 3 года назад

That's awesome!

@opt57-ru49 4 года назад

In fact, the burning of fractal Lichtenberg figures begins quite quickly with 500 volts and thousands and millions of volts are needed only if you need to burn very long figures without moving the electrodes. If you rearrange the electrodes and use one of the electrodes wet (put it on a napkin moistened with electrolyte), you can very quickly and beautifully burn out both the table and the tree trunk and the bench at 500 volts and about 250 milliamperes. One thing I can't understand ... how do I use these canes? It is too thin for a crutch, too beautiful for driving a flock of sheep or looking for mushrooms in the forest... How can I use it?

@RustBeltAuto 4 года назад

The baking soda and water will not burn my desk, or a finished piece of wood, because it cannot get impregnated into the piece to burn it. Instead, the electricity just dances on top of it whenever it gets a chance to take a path of least resistance. Wrapping an electrode with a wet rag is a bad idea. Diamond willow is very strong. This piece is just for show. When I find a piece that looks this cool, I cannot help myself from harvesting it. They are quite rare. I can look all day in swamps to find one, but I do make many walking sticks, trekking poles, and canes that are lighter, smaller in diameter, and completely practicle.

@opt57-ru49 4 года назад

@@RustBeltAuto In order for the electrolyte to penetrate deeply into the wood, it is easiest to treat this wood with a solution of a surfactant, such as a solution of shampoo or washing powder, before applying the electrolyte. After 5 to 10 minutes after this treatment, the electrolyte containing baking soda will penetrate much deeper into the wood. For oak, pine, birch, and beech wood, this pretreatment is not required and will only lead to burning in the depth of the wood, not on its surface, and in Your case it can help. If you watch my videos , you will see that I do not cover the wood with a napkin, but simply put one of the electrodes on it - this prevents the occurrence of burning under it and moving the second electrode along the burned pattern, you can control the direction of burning.

@RustBeltAuto 4 года назад

@@opt57-ru49 what I did seems to work really well. I don't believe I need any other tricks. I know just enough about electricity to be dangerous. I was thinking if you put a wet rag with electrolytes on it, it would wear out the electrode faster. Thank you for the advice. I will look at your stuff.

@Poordirtfarmer 4 года назад

🕵👍

@luann7165 4 года назад

Boy scouts really paid off, good job Roy...🤣

@RustBeltAuto 4 года назад

Troop 212

@luann7165 4 года назад

Your scaring me

@RustBeltAuto 4 года назад

I don't believe you.

@sklyn6468 4 года назад

You're accent sounds exactly like Jesse Ventura. Is that Minnesotan?

@RustBeltAuto 4 года назад

Lol... My crazy governor.

@sklyn6468 4 года назад

@@RustBeltAuto I was hoping I got the accent right. I'm from the Left Coast so what do I know?

@RustBeltAuto 4 года назад

@@sklyn6468 how to live in a tent city, or pay 1,000,000.00$ to live in a tar paper 10'X10' shack? Sorry, had to say it.

@sklyn6468 4 года назад

@@RustBeltAutoYeah, I'm a bit inland from the shithole cities - up in the Sierra's. But my taxes are paying for that crap. Your vids are funny btw

@MacNerfer 2 года назад

@@RustBeltAuto I'm guessing you're in the prairie part of the state. I'm from NE part of MN, and our accent is a little different. Or it could just be a family thing, if your parents are from the old country.