DIY airbrush cleaner and acrylic paint thinner | save $$

Подписаться 7 тыс.

Просмотров 33 тыс.

50% 1

Saving money when and where you can is important in this hobby. Here I show you my DIY recipes for an airbrush cleaning solution and an acrylic paint thinner. All you need is distilled water, IPA, window cleaner and glycerin in measured amounts plus a couple of plastic dispensers. I’ll walk you through it. I make mine in 250 ml batches and the basic supplies which cost approximately €10.00 will serve me for years!
Price comparison:
1 litre of commercial airbrush cleaner = €75.20
1 litre of DIY airbrush cleaner = €4.00
1 litre of commercial acrylic paint thinner = €69.75
1 litre of DIY acrylic paint thinner = €3.50
Check out my other social media sites:
MLC on Facebook:
/ maple-leaf-customs-106...
MLC on Instagram:
/ maple.leaf.customs
Samed Wheels is a sponsor of my RU-vid channel:
/ samedwheels
www.ebay.de/us...
WhatsApp: +52 33 3578 5045
Enjoy this diecast custom job. If you like the video, please give it a thumbs up, subscribe to my channel and hit the notification bell for regularly updated content. It’s free! Your respectful comments are always welcome. Be sure to tell me where you’re watching from. I’m interested to know!
Andrew Price
Basel, Switzerland
MapleLeafCustoms@icloud.com
Want to donate some old, beat-up diecast cars by post for future builds? I use an international shipping address in Germany:
Andrew Price
c/o LAS Burg 24708
Colmarerstrasse 10
Weil am Rhein 79576
Germany
FYI: I don't collect, display or sell the cars. All of the Maple Leaf Customs finished projects that are kid-friendly are put in custom blister packs and go to my local Goodwill store where they are given to children for free. If there are parts that can be swallowed, those cars are given as gifts to adult collectors that are fellow enthusiasts.
Note: Due to the use of paint stripping chemicals and power tools, this channel is not intended for viewing by children. Age 14+ is recommended.
__________________________
no copyright music credits
Coffee For Teddy
Royalty Free Music by Giorgio Di Campo for FreeSound Music
freesoundmusic.eu
/ freemusicfor. .
/ freesoundmusic
original video: • Coffee For Teddy no ...
download mp3: direct-link.ne...

Авто/Мото

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 209

@razorproductions599 8 месяцев назад

I use distilled water .95 L (1 quart), dishwasher rinse aid (6 drops) (in place of the alcohol) and glycerin (6 drops) for the thinner. It is safer for the grandkids to spray. I do the cleaning so your recipe will work well for that for me! Thank you!🚿

@MapleLeafCustoms 8 месяцев назад

That sounds good too. There are lots of ways to save $$, over buying the brand name thinners and cleaners! 🍁☕️👍

@gregory6488 7 месяцев назад

Have you also used water and dishwasher rinse for cleaning the airbrush?

@razorproductions599 7 месяцев назад

@@gregory6488 I have. But the alcohol works better and my airbrush is safe to use it on (no rubber). If you have parts you think could be damaged the "safe" thinner is a great cleaner!

@danschopshop7939 2 года назад

I knew there were homemade recipes but never looked..... great info Sir and thanks

@MapleLeafCustoms 2 года назад

You got it. So much intel out there. I was just waiting for a chance to sit down and document it. Hope it helps, Dan! Have a great weekend. 🍁☕️

@jasonroach6445 5 месяцев назад

G'DAY fella. Thanks SOoooooooo much. I've been spending heaps on those. I'll split my savings with you. You're a true champion 🏆

@MapleLeafCustoms 5 месяцев назад

Glad you found this. It's definitely a money saver. I can use both more liberally now that I'm not concerned about the costs. 🍁☕️👍👊

@septiccalling8341 2 года назад

One of the first things I did when I got back into model making and then the cars, was to look up home made recipes, exactly because of the cost. The ones I settled for are almost exactly similar to yours, though I use concentrated screen wash in the cleaner. They both work perfectly well. Good video Andrew 👍🏻🇬🇧👌🏻🇨🇦👏🏻🇨🇭

@MapleLeafCustoms 2 года назад

Lots of great tips and tricks out there! I've seen windshield wiper fluid used too. Even cheaper, I think! Anything to save a few pennies! 🍁☕️👍

@gruvin4602 Год назад

A guy has to try to save a few bucks now a days damn I remember paying 10 bucks for a 124 or 125 scale models now starting at 40 and up and paints 99 cents now 4.99 for a testor bottle so props to all model builders to help 1 another out in this now not so cheap hobby.i just got bk into this hobby and have dropped about 5 to 600 bucks but it's an investment now haha

@TrueNorthModels 2 года назад

Great video and tips and yes, that is my recipe as well. Cheers

@MapleLeafCustoms 2 года назад

Great! It really saves a bundle, doesn't it! 🍁☕️🇨🇦🦫

@daneself858 2 года назад

Thank you for sharing planning to get a airbrush next year

@MapleLeafCustoms 2 года назад

That's gonna be a game changer, Dane. Maintenance will be a big part of keeping them in shape, and this will be a money saver. 🍁☕️

@ranradd 29 дней назад

Thank you so much. (Totally right about the cost of getting into this "hobby.")

@MapleLeafCustoms 29 дней назад

You're welcome! Glad it was helpful! 🍁☕️👍

@newapollogaluh6060 2 года назад

Nice sharing my friend🙏🙏👍👍👍

@MapleLeafCustoms 2 года назад

Many thanks. Have a great weekend. 🍁☕️

@BPCustomCreations 2 года назад

Such a great tutorial and a valuable lesson! When I eventually get an airbrush I will definitely be giving this a go!

@MapleLeafCustoms 2 года назад

I don't have expensive airbrush equipment, but I do take care of all of it well. This is a big money saver and works just as well. And I use it more liberally, not worrying about the cost as I do with the commercial brand stuff. 🍁

@iancarlin4694 4 месяца назад

Nice share. This is basically same recipes I have used for many years now. The glycerine acts as a surface tension remover allowing the water and alcohol to mix as well as a flow improver. For cleaner Mix, I don’t use window cleaner but about 5- 10 ml household ammonia and the balance of your window cleaner volume is made up with water. If anyone is concerned about ammonia affecting their airbrush, just rinse through with water after cleaning. I have never had any dechroming, but I do only have Iwata and H&S brushes

@MapleLeafCustoms 4 месяца назад

Good intel. Thanks! 🍁☕️👊

@namegoeshereorhere5020 Год назад

I've been running ammonia Windex through my brushes(H&S Infinity, Eclipse CS, Badger 150 and a Badger Renegade) for 10 to 30 years(in the badger 150) and never had a problem. I've even accidentally left it in the cup overnight on occasion.

@MapleLeafCustoms Год назад

That answers the age old question then. No worries about ammonia in the recipe! What I've read is that it may take the chrome finish off the cheaper airbrushes. 🍁☕️👍

@MetalMania3DTV-TAS-AUS 2 года назад

Nice DIY Airbrush tips and info Andrew I'm sure this will help a lot of people out cool, have a great weekend my friend cheers KC 🇦🇺🇦🇺🤝🇨🇦🇨🇦😎🙂👍

@MapleLeafCustoms 2 года назад

Thanks, KC. You too! First snow is on the ground this morning... 🍁☕️👍

@MetalMania3DTV-TAS-AUS 2 года назад

@@MapleLeafCustoms my pleasure and wow ok Snow nice and cool cool, 🤣😎 you should show us in your up and coming videos, stay warm and Safe over there, cheers 🥂🍻🍺🥂🍻🍺 KC Cradle Mountain Tasmania Australia 🇦🇺🇦🇺🤝🇨🇦🇨🇦😎🙂👍

@peterpop-off 10 месяцев назад

I will buy some glycerin and give this a shot 👍 Retail prices for paint supplies are a joke

@MapleLeafCustoms 10 месяцев назад

It's a huge money saver. Good luck with the recipe. It'll work great. 🍁☕️👍

@RcNickster709 2 года назад

Always great to share the knowledge. Thanks Andrew. Nice work.. :)

@MapleLeafCustoms 2 года назад

Thanks, bud. My pleasure! First snow on the ground over here this morning. 🍁☕️❄️

@RcNickster709 2 года назад

@@MapleLeafCustoms Been having some really strange weather down this way.. +11 C ... Rainy... No snow yet

@JaysDiecastCreations 2 года назад

Ok now chemistry class is over and a valuable lesson is learned! This will be very helpful as there is a Badger Patriot 105 on the way to my house for Christmas 😊 another rabbit hole has opened 😂 its bed time, thanks for sharing this Andrew ✌

@MapleLeafCustoms 2 года назад

Badger, cool! You're on Santa's nice list! That's a really good one, Jay. There's another learning curve ahead - but a fun one - and a real game changer. First snow on the ground here today! 🍁❄️👍

@JaysDiecastCreations 2 года назад

@@MapleLeafCustoms I know I'll have alot to learn but it should be fun!

@JaysDiecastCreations 2 года назад

@@MapleLeafCustoms happy winter, hunker down my friend 👊

@FordmanCustomsandDesigns 2 года назад

Thank you Andrew this will be very helpful with cleaning my airbrush as i use it alot ..... and now I have to go make coffee lol

@MapleLeafCustoms 2 года назад

Guaranteed to work as well as any commercial brand you pay big $$ for. Now I use it more liberally without worrying about how much it costs. Best way to go! 🍁☕️

@samsscaledmodels1872 2 года назад

Thanks Andrew 😀 this is most helpful 👍

@MapleLeafCustoms 2 года назад

Great! Glad this little bit of DIY helps out. I've saved lots of money doing this. 🍁☕️

@jm9toys931 2 года назад

Nice bro 💪

@MapleLeafCustoms 2 года назад

Thanks!

@EVOSparksDieCast 2 года назад

Thanks for sharing bud👍

@MapleLeafCustoms 2 года назад

You got it, EVO. Thanks for watching and the ongoing support. That means a lot. 🍁👊

@MidIslandCustomDiecast 2 года назад

I don't really use acrylic paints anymore, but these are good tips if I do. Thx Andrew!

@MapleLeafCustoms 2 года назад

I'm still working my way through my original batch of Vallejo and Createx paints! Still pull out the odd spray can on occasion too. Trying not to buy much else these days, Evan. Saving money is the name of the game. Hope all is well with you and Maddie. Take care and enjoy a nice weekend. 🍁☕️

@koolkatkustomdiecast801 Год назад

So detail oriented Andrew yes I make my own and they work ok but again a little scrubbing always comes in I use D water windex or simple green isopropyl Alcohol and glycerin and using spray bottle I use to clean.

@MapleLeafCustoms Год назад

Most of the recipes I've found online are pretty close to being the same. This is the one I've used for some time now. 🍁👍

@moonman19 2 года назад

nice tips and what about that custom truck behind the isopropanol?

@MapleLeafCustoms 2 года назад

Thanks, MoonMan. I think you're asking about my Fury Road War Rig. That's build #109 in my playlist. Have a look! 🍁☕️

@PatGilliland Год назад

Thanks for the recipe, from another frugal Canadian.

@MapleLeafCustoms Год назад

No problem. Hope you have great success with it and save lots of money. Those commercial solutions are so expensive when you break down the costs! Happy New Year! 🍁🎉

@simplekustomsbyeddiepapand1838 2 года назад

Thanks for sharing Andrew!! As always outstanding video!!!

@MapleLeafCustoms 2 года назад

My pleasure, Eddie. These are a couple of good recipes that'll save you some coin. Try them out. 🍁👍

@bandetsgaming1154 7 месяцев назад

Thank you this was exactly what I was looking for, for so long 😂😂😂

@MapleLeafCustoms 7 месяцев назад

Glad I could help! I've saved so much money mixing my own. You will too! 🍁☕️

@fightingcorsair7297 Год назад

These are great. Thank you for posting this.

@MapleLeafCustoms Год назад

I'm glad you found it and I hope the recipes help. They're good money savers! 🍁👍

@NinjaKoalaAUTW Год назад

Good recepie ❤

@MapleLeafCustoms Год назад

Thanks. I hope you can make good use of this. Big money saver! 🍁☕️👍

@NinjaKoalaAUTW Год назад

@@MapleLeafCustoms yes I have bought all materials and they are quite cheap except Isopropyl alcohol

@yvesdubois4964 Год назад

Nice tutorial, well done, very clear. Thanks for sharing. Best regards from 🇨🇵

@MapleLeafCustoms Год назад

Thanks, I hope you find it useful. Greetings from Switzerland. 🍁

@rdcustomdiecast 2 года назад

Thank you I will be using this to save a few $ I assure you the wife will appreciate it for sure lol

@MapleLeafCustoms 2 года назад

They're great money savers. And they work very well too! 🍁

@aleksandarpirkl3386 Год назад

Very Helpful and nice Tutorial,thanks

@koolkatkustomdiecast801 Год назад

Another thing I did was bought a gallon of automotive 2k clear because it’s way cheaper than buying from hobby supplier. Big savings there

@MapleLeafCustoms Год назад

Can't get that over here. I wish...! 🍁😀

@dreadtrain2846 26 дней назад

Pine-Sol works great in place of Windex, etc.

@MapleLeafCustoms 26 дней назад

Good tip. Thanks! 🍁☕️

@gerickbriones1708 2 года назад

Thanks for the infos. I usually use 91% isopropyl alcohol but hard to find. Thanks I saw your formula using 99.9% instead of 91%. Excellent content 👍

@MapleLeafCustoms 2 года назад

99.9% is easily accessible over here where I live. Interesting. Just change your dilution percentages accordingly. 🍁👍

@georgetaylor5482 5 месяцев назад

Thanks this is a giant help.

@MapleLeafCustoms 5 месяцев назад

Great! Glad you found this. 🍁☕️👍

@ripwreckraceway 2 года назад

cool thats so groove of you! so i have an idea of some tips and it all good thank you brother for your awesome tips brother

@MapleLeafCustoms 2 года назад

It's a big money saver too. I go through a lot of this stuff, keeping my equipment in good clean shape. 🍁

@aleksandarpirkl3386 Год назад

Very Helpful and nice Tutorial,thanks

@MapleLeafCustoms Год назад

Thanks, Aleksandar. I hope you'll be able to use it. 🍁☕️👍

@theaussienurseflipper.8113 Год назад

I seen a recipe for flow improver. The recipe was 32 oz of water 946ml and add half a teaspoon or 2.5 ml of dishwasher rinse aid. The woman's video I saw she use jet dry rinse aid. IPA in Australia is very expensive. A litre of 70% so you back about 20 bucks. I'm running if you can use the denatured alcohol which we called methylated spirits here. Which is 96% ethanol with a bit of methanol added to make it toxic. Cheers Graham.

@MapleLeafCustoms Год назад

Hi Graham. Excellent question, to which I don't know the answer. Different products are available around the world. All my research was done via RU-vid videos, and there are a myriad of recipes out there. Mine is made with what seems to be the standard measurements, though they certainly vary. You'd have to do a bit of research and compare IPA with methylated spirits to see what the differences are. Sorry I couldn't come up with a better reply. Keep after the solution, because it's a real money saver over the store bought brands. 🍁☕👊

@ramman2123 2 года назад

Great video ,thank you so much for sharing

@MapleLeafCustoms 2 года назад

You are very welcome. I hope the recipes work as well for you as they do for me and many others! 🍁👍

@hoytwhitmore8872 2 года назад

Yes That Will Be Nice Thank You Winder GA

@MapleLeafCustoms 2 года назад

Have a great day, Hoyt! 🍁👊

@daviddowd3764 2 года назад

Works fine! Thanks

@MapleLeafCustoms 2 года назад

Great! It'll save you lots of money too! 🍁👍

@zeldadiecastracing 2 года назад

Thanks for sharing bos

@MapleLeafCustoms 2 года назад

Sama sama! Have a nice weekend! 🍁👍

@dgs.creates 2 года назад

Very cool and helpful. Just need an airbrush now haha. Cheers Andrew 😎👍🏻

@MapleLeafCustoms 2 года назад

I bought a real cheapo to get started back in the beginning and I still use it. Cost less than 2 cans of spray paint. Keep it clean and it'll last. 🍁👊

@dgs.creates 2 года назад

@@MapleLeafCustoms wow that's pretty good!

@briansdiecastthailandstoth6747 2 года назад

Great info

@MapleLeafCustoms 2 года назад

Thanks, Brian. Take care and have a nice weekend. 🍁☕️

@POULPY47 Год назад

Hi , amonia is really bad for airbrush chrome ? Thanks for the knowledge you share with us !

@MapleLeafCustoms Год назад

You are most welcome. This video simply comes from information that I've collected online too. There is a lot of knowledge out there, which we all benefit from, if it's shared! 🍁👊

@silversscratchbuiltproduct6277 2 года назад

Fantastic I'm going to make the thinner thank you so very much

@MapleLeafCustoms 2 года назад

It's a great money saver! 🍁👊

@dennyps1 11 месяцев назад

Really good demonstration and presentation Might I respectfully suggest that in your post production of your videos the you use an EQ and roll off some of the high end on your voice over. There is a very distinct whistle in your vocal. Be well and thank you 😊

@MapleLeafCustoms 11 месяцев назад

Thanks for the constructive feedback, and I hope you'll find these recipes useful. I've been told my whistling Ss is quite annoying and I wish I could stop it. Problem is I'm legally deaf and I don't detect it. I'm therefore also challenged when editing for the same reason. I use iMovie on my Mac and they have equalizer bars and some noise reduction features, but I wouldn't be able to tell if I eliminated it or not. I hope it didn't take away too much from the video content. So sorry! Wishing you a fine day, with greetings from Switzerland - Andrew 🍁👍

@ianmckinley5613 6 месяцев назад

Hello sir, may I suggest looking up "de-esser" on the internet. It's automatic and reasonably effective in cases like yours. You have posted very useful information and I hope you will continue. Blessings

@diecast_MikeEspo 2 года назад

What is a very good 2 stage gun for first time , with compressor and all parts , I am talking turn key 🔑? Thanks. Mike

@MapleLeafCustoms 2 года назад

Hi Mike. I'm not really an airbrush specialist. I started out with a pretty average priced Timbertech brand set (compressor, airbrush, hoses, connectors, etc.) and have had very good luck with it, so I haven't felt the need to upgrad yet. I did buy a trigger style airbrush recently, just to see if I like it. Head over to Diecast Graveyard to get lots of information on brands and recommendations from Paul. He's my 'go to' guy on this topic. 🍁☕️

@diecast_MikeEspo 2 года назад

Ok , yes I have watched Paul’s videos. Thanks again . Mike .

@danperkins1533 Год назад

Thank you I need to see a still copy of these items please if you can. I would be greatful

@MapleLeafCustoms Год назад

If you pause the video at 1:13 you can take a screen shot of the recipes.

@428garage 2 года назад

Very Nice

@MapleLeafCustoms 2 года назад

Thanks! Have a great day! 🍁👍

@morphf-YouTube 2 года назад

Nice video Andrew, really helpful. Do you want to share the measurements file on your desk, so I can print that one out as well? It’s really handy and clean to read ❤

@MapleLeafCustoms 2 года назад

If you send me an email (check in the description), I'll gladly send you a .png file of the recipes. Or try a screen grab from the video. Happy to help out. 🍁👍

@ste022 2 года назад

This is great thanks, using your thinner I'm finding that that when I'm done it's much easier to clean out especially when using Stynylrez primer. Also so far I'm getting a pretty flat finish the other homebrew recipes I've tried contain flow aid and retarder which would spray nice but leave me with a satin finish.

@MapleLeafCustoms 2 года назад

I'm glad it's working well for you. This is a composite recipe gleaned from all of my online research. I find it to be very effective and costs saving too! 🍁👍

@robertlopez9565 4 месяца назад

Good job thank you

@MapleLeafCustoms 4 месяца назад

No problem. Hope it works well for you, and saves you lots of money! 🍁☕️👍

@garycarver3694 2 года назад

That's a good recipe I do the same

@MapleLeafCustoms 2 года назад

They work great! 🍁👍

@gamexivi Год назад

does it work well with vallejo?

@MapleLeafCustoms Год назад

Yes it does. Vallejo is what I use almost exclusively. 🍁☕️👍

@LMPtuber 2 месяца назад

Hello, thank you for a very useful tutorial. I was wondering if there was a similar recipe for Airbrush flow improver (for acrylic paints), which is just as expensive as airbrush thinner when bought commercially.

@MapleLeafCustoms 2 месяца назад

There might be something out there on RU-vid. The recipe for the thinner solution has a flow improver additive in it, which serves the same purpose. 🍁☕️👍👊

@LMPtuber 2 месяца назад

@@MapleLeafCustoms Thanks for your prompt reply. From what I can gather, there are no tutorials on DYI flow improver for airbrush. I found some videos on painting techniques for canvas painting artists, but nothing for scale modellers. Also some search results for flow improver actually show videos on making DYI acrylic paint medium. So I hope in the future you'll research the subject and post a tutorial. I will definitely try your recipes on thinner and cleaner.

@glynnchambers8084 16 дней назад

Hi great video for a beginner is it possible to send me a copy of the sheet you have showing the ratios please

@MapleLeafCustoms 16 дней назад

I'd be happy to. You need to give me your email address. 🍁☕️

@sublimegreen 6 месяцев назад

Can u use this thinner to thin acrylic paint for painting on canvas?

@MapleLeafCustoms 6 месяцев назад

Well it's an acrylic paint thinner, so why not? Try it out. 🍁☕️👍

@sujanarejab Год назад

thanks for the recipe

@MapleLeafCustoms Год назад

You're most welcome. I hope it works for you! 🍁☕️👊

@sujanarejab Год назад

@@MapleLeafCustoms sure. i will try. thanks again from malaysia. i want to paint 3d printed robotic prosthetic hands for kids

@tojorozombie Год назад

Thank you kindly, Sir! I found this most informative!😎👍

@sublimegreen 6 месяцев назад

Thanks

@MapleLeafCustoms 6 месяцев назад

You're welcome. I hope this works for you and saves you lots of mone! 🍁☕️👊

@davidyoung8105 Год назад

Nice Recipe, thanks. Doesn't the alcohol evaporate from those cool squeeze bottles?

@MapleLeafCustoms Год назад

Good question, though I don't think so. I go through these pretty quickly, now that I'm not worried about costs, and I haven't noticed any reduction in effectiveness. Might want to use a sealed bottle if that's a concern though. 🍁☕️👍

@THROTTLEPOWER 2 года назад

👍👍👍

@MapleLeafCustoms 2 года назад

Thanks, Tim. Enjoy the Thanksgiving weekend. 🍁🦃

@AdrianPak24 2 месяца назад

Is there a big difference using it in comparison with the Vallejo one? Because some said these DIY cleaners and thinners work with most acrylics except Vallejo 🤔

@MapleLeafCustoms 2 месяца назад

I use Vallejo acrylics all the time. This recipe works perfectly on that. No worries. 🍁☕️👍

@aleventb Год назад

Thanks for sharing, looks very easy and cheap. Would you please advise about the quality of glycerine? Is it herbal grade?

@MapleLeafCustoms Год назад

That, I don't know. Mine's just out of the kitchen pantry. It's the part of the recipe that serves as the flow improver. Give it a try and save lots of money! Have a great day! 🍁☕️👍

@EndlessSims3 Год назад

Many say can use just bottled water for it is not tap water if have tap water in a city I use bottled water 💦 now heard ammonia dose not really hurt the airbrush many saying this. Thank you for tutorial 🎉😂😊 Now as for acrylic paints can I use like the apple brand or any brand? Also can I use ink too in airbrush? If so do I need to add anything into the liquid inks?

@MapleLeafCustoms Год назад

The cleaner and thinner will work perfectly well on all brands of acrylic paints. Not sure about the ink question though, as I've never tried that. I imagine I'd want to dilute it first. Also wash out the airbrush immediately afterwards. I have a couple of cheap airbrushes that I use to experiment with on these types of things. 🍁

@EndlessSims3 Год назад

@@MapleLeafCustoms thank you, I have been watching many cool ink paintings but most use hair dryers due to ink and alcohol applying inks and alcohol on their canvases or heavy watercolor paper to poster boards but many don’t use the airbrush so I see many different ways to paint with many kinds of mediums anyways they first add alcohol on their paper and then add the inks, it’s the same kind of type for acrylic pour paintings, anyways not much on ink and airbrush paintings, but I am sure many are on RU-vid a lot to search, anyways no one painting on the foam boards as I have not found, anyways many mediums to use, I like colored pencils art it’s the easiest for me so far, acrylic painting is easy depending on what I want to paint, land scapes and like black horses on colorful background thank you for your videos. Oh BTW I always clean my tools when I am done, using clean solutions that I am learning on better cleaning, lol

@clivemahony9827 4 месяца назад

Just getting into using airbrush trying to find were to get products in Ireland

@MapleLeafCustoms 4 месяца назад

Same thing for me here in Switzerland. I've have to make do with Amazon. 🍁☕️✌️

@ripwreckraceway Год назад

i have watched this twice now book marked

@MapleLeafCustoms Год назад

Thanks, Robin. It's a great recipe that will save you money! 🍁👊

@ellencochrane7847 Год назад

I use auto paints can you do a recipe for that pleas

@MapleLeafCustoms Год назад

I'll have to do some more research before making that video, as I don't use auto paints. I'd suggest surfing around RU-vid with that specific search string. That's what I'll do. I'm sure there'll be lots of intel for us out there. 🍁👍

@gpapaikoful 2 года назад

HI, This is good but have noticed that your calculations is slightly out for a 3:1 ratio for 250ml. They should be Water: 187ml, ISO Prop: 63ml. Calculation: water: (250/(3+1)) * 3 = 187ml ISO Prop: (250/(3+1)) * 1 = 63ml. and then the 10 15 drops of glycerin. I use a similar formula but with a 2:1 ration of water : ISO Prop, and the same number of drops of glycerin. I think your formula might a little better of one of the brand (Vallejo), I noticed that recently they may have changed their acrylic paint formula to an acrylic/urethane based base, because when I thinned it formed a "rubber type" of a skin on the mixing rod, which never happened with the older stock that I have, hence looking at other options to test. I will be testing the following rations to see which one works best. 5:2 ; 3:1 and 4:1

@MapleLeafCustoms 2 года назад

You've done some careful math here, George. More than I did. I just created a composite recipe from the many that I'd seen here on RU-vid. It's working OK for me. I haven't got any of the newer Vallejo paints though. Thanks for taking the time to help me learn. 🍁👊☕️

@gpapaikoful 2 года назад

@@MapleLeafCustoms No prob my please, we are all learning something new all the time. As to the Vallejo paints, I had experiment last night two small batch one with a thinner of water:ISOPro (Call this B1) and one with water:acetone (Call this B2) same ratios 2:1 for both B1 and B2, bith B1 and B2 had a couple of drops of Glycerin added. When mixing Vallejo paint in two small tubs 5 drops in each: 1/ B1 - batch started to form a visible "skin" while 2/ B2 - thinned nicely. So a next step a more thorough test I will be making two 60ml bottles of the following thinner formula and buying two new Vallejo paints of the same color. As I already have a 15 lt container of ISO PRO 99.9% - Bought this a couple of years ago cheap. B1: Water (2) -40ml:ISO PRO 99.9%(1)-20ml and 4 drops of Glycerin B2: Water (2) - 40ml:Acetone (1) - 20ml and 4 drops of Glycerin Then make two 10ml jars of thinned Vallejo paint and see what happens and test as to how each sprays. I know how B1 will turn as as I have been using this formula for a build I am already doing on just a couple of parts, so the test will be mainly on B2 formula and will let you know of the results.

@clivemahony9827 4 месяца назад

Hi I'm using army painter airbrush medium to help me with my citadel paints which dried up over the years I'm putting them in Dopper bottles will this mix your using here work the same as the army painter mix thanks

@MapleLeafCustoms 4 месяца назад

I'm sorry I don't know much about the Army Painter inventory. My recipe is good for all acrylic paints. Not made for enamels. Just be sure. 🍁☕️👍

@clivemahony9827 4 месяца назад

@@MapleLeafCustoms I'm not an expert with paints I'm sure citadel is acrylic so going to try and replicate your recipe thanks 👍

@walidkhier Год назад

Why do you need IPA in the cleaner? Water and window cleaner are more than enough.

@MapleLeafCustoms Год назад

This is a composite recipe that I made after watching and learning from several other RU-vid videos. I have lots of IPA, it's cheap and so in it went. If it works great for you without any, than that's even cheaper. Super! Wishing you a great weekend. Greetings from Switzerland.

@rfisch1975 7 месяцев назад

Has anyone used this thinner for polycarbonate paints on lexan rc car bodies?

@jpeero Год назад

how can you tell if there is ammonia in the window fluid? i bought a cheap bottle today and no ingredients were listed

@MapleLeafCustoms Год назад

I only know from the labels! I don't think it's a deal breaker though. I've read that ammonia is really only harmful if you've got a cheap airbrush and leave it in there too long. For just cleaning up, I wouldn't worry about it. 🍁☕️👊

@maccaroni3589 Год назад

Nice tutorial. But How many ml of water if i use 70 percent alcohol?

@MapleLeafCustoms Год назад

Good question, and I'm not sure. I think the stronger the alcohol, the better the results. I get mine on Amazon. Have a look. 🍁

@theaussienurseflipper.8113 Год назад

You can just Google an alcohol calculator.

@chadlanning5885 Год назад

Does it matter if you use vegetable glycerin

@MapleLeafCustoms Год назад

I think that would be OK. 🍁👍

@Galdorx 2 года назад

can i use this cleaner and Thinner with Vallejo paint and Tamiya paint. I tryed to make home made cleaner before, and when i use Tamiya thinner and paint. and clean it with the homemade cleaner ,, its not working and the paint get sticky and nasty. so if you use this, cleaner, you have to allso use this thinner, and not another brand, Hope you understand what i mean, Svein from Norway

@MapleLeafCustoms 2 года назад

Hi Svein! You can definitely use both of these DIY recipes for acrylic (Vallejo) paint jobs. That's what they're made for. The ingredients are basically the same as the store brand products, but can be mixed for a fraction of the price. That's the advantage. You don't have to use both together. You can use a DIY thinner and a store bought cleaner, or vice versa. Let me know if you try this and how it works out, OK? Thanks for watching and commenting, and I appreciate your question. Hope it was well answered. 🍁👍🇨🇦🇨🇭🇳🇴

@Galdorx 2 года назад

@@MapleLeafCustoms hi again. im seaching for Glyserin her in norway and i get very mych somthing called glyserol, can i use that, or it that not the same as glyserin.

@MapleLeafCustoms 2 года назад

@@Galdorx According to a quick Google search, glycerol is a pure form, on the other hand glycerin contains 95% glycerol. The difference is negligible. You could use either one in the DIY recipes as only a few drops are required in the mix! www.differencebetween.net/object/comparisons-of-food-items/difference-between-glycerol-and-glycerin/ Hope this helps! 🍁

@arbitScaleModels 2 года назад

When I try to clean vallejo paints in the past with Isopropyl it get really gummy. So I wonder how your mix works with it?

@MapleLeafCustoms 2 года назад

I use a lot of Vallejo paints and this recipe works just fine for cleaning the airbrush. I haven't had any issues with it. 🍁👍

@arbitScaleModels 2 года назад

@@MapleLeafCustoms Thanks for your response. So does your thinner also work with vallejo and tamiya?

@MapleLeafCustoms 2 года назад

@@arbitScaleModels Sure does. Those are my two main brands.

@arbitScaleModels 2 года назад

@@MapleLeafCustoms Thanks so much!

@ste022 2 года назад

Vallejo only goes gummy when you use pure isopropyl once you dilute it it's fine, btw Vallejo thinner and cleaner is made using Butyl glycol so if you swap out the isopropyl for the butyl you'll have basically the same thing as Vallejo charge a fortune for.

@pimpmydiecastsdiecastandto3176 2 года назад

great video andrew .. been thinking of doing this for my acrylics ,, can make it even cheaper as distilled water is just water that has been boiled using a simple method to remove impurities

@MapleLeafCustoms 2 года назад

Great idea, Paul. Saving more money! Water from the air conditioning pan is distilled too. So many great tips out there. I knew about the recipes but was blown away when I did my own cost comparison. No going back to commercial brands now... 🍁☕️

@ripwreckraceway 2 года назад

i us to have an air brush but like got in the way ! a sad story to be sure

@MapleLeafCustoms 2 года назад

Once investing, they're worth taking care of. I have a couple of them, but none of them are high end. Still want them to last as long as possible though, so this stuff helps. 🍁

@rorypeycha9700 Год назад

Does it work with army painter

@MapleLeafCustoms Год назад

I don't know that brand. It works with any and all acrylic paints, so that's what you want to check. 🍁☕️👍

@dwest4473 Год назад

Has anyone used Photo-flo a component in thinner? I have a bottle of this that I use as part of a record cleaning solution and would like to find other uses since the amount used is very small.

@MapleLeafCustoms Год назад

I don't know that product. 🍁

@grahamwestwood4449 2 года назад

Ironing water is de-ionized water. You should be using Distilled water for this.

@MapleLeafCustoms 2 года назад

I truly didn't know there was a big difference. Thank you for pointing that out and helping me to learn. It does work marvellously well, however. Wishing you a great week ahead! Warm greetings from Switzerland - Andrew 🍁👊

@dgriffy04 2 года назад

Deionised water and demineralised water are effectively the same. Same result from different methods of removing the impurities. Use whatever is cheapest or easiest to get!

@ste022 2 года назад

In the UK distilled water isn't easy to find and it's very expensive, so it's commonplace to use de-ionized water.

@destapandohotwheels2260 2 года назад

Like 45 amigo

@MapleLeafCustoms 2 года назад

Thanks! 🍁☕️

@gruvin4602 Год назад

Ammonia brakes down rubber o rings on cheaper airbrush as tje more expensive ones should have solid o rings that wont brake down is what I have read and seen

@MapleLeafCustoms Год назад

That's true. You get what you pay for in those airbrushes. There's no ammonia in these recipes though, so it's safe for all brands. 🍁👍

@gruvin4602 Год назад

Very true I just orderd a 180k kit this brush is manufactured under alot of different names and is not bad as I'm new to air brushing I'm waiting for my master g233 would anyone know of this g233 has rubber o rings or solid rings in it?

@gruvin4602 Год назад

One more ? Iv read when u use matte paints u can put a drop or 2 of glycerin in tje mix up 9f paint and will give paint a gloss finish has anyone tryed this befor?

@caster085 16 дней назад

What if you can't get 99% alcohol only 66%

@MapleLeafCustoms 16 дней назад

Look online. I get mine from Amazon. The stronger, the better. 🍁☕️

@caster085 16 дней назад

@@MapleLeafCustoms i think they do not sell it in Canada FOR SOME REASON

@koolkatkustomdiecast801 Год назад

The commercial stuff is ridiculous in price

@MapleLeafCustoms Год назад

Oh, I know. This is a huge money saver, and I don't feel I have to use it sparingly. Easy to whip up another batch! 🍁👊

@dgriffy04 2 года назад

Great video, very helpful but your audio is very bad, lots of sibilance on the audio. Should be very easy to fix at your end.

@MapleLeafCustoms 2 года назад

Thanks for the feedback, Dave. I've been told my whistling Ss is quite annoying and I wish I could stop it. Problem is I've lost most of my hearing and I don't detect it. I'm therefore also challenged when editing for the same reason. I use iMovie on my Mac and they have equalizer bars and some noise reduction features, but I wouldn't be able to tell if I eliminated it or not. I hope it didn't take away too much from the video content. So sorry! Wishing you a fine day, with greetings from Switzerland - Andrew 🍁👍

@dgriffy04 2 года назад

Well if you can’t hear it, then it’s understandable that you struggle to fix it. No malice meant. Great video and helpful. Keep making great content 👍🏻

@MapleLeafCustoms 2 года назад

@@dgriffy04 thanks, brother. 🍁

@dripboo9602 Год назад

Stop whistling lmfao I'm so sorry

@MapleLeafCustoms Год назад

I am very sorry that this caused discomfort for you. I have lost most of my hearing and that's why my S's are whistled. I can neither hear it myself nor correct the condition when editing. I have to depend on sound bar levels. I did write out the recipes so you can pause there and see what the mix is. Wishing you a lovely weekend, from Switzerland - Andrew 🍁

@dripboo9602 Год назад

I'm only kidding

@MapleLeafCustoms Год назад

@@dripboo9602 It's all good.

@dripboo9602 Год назад

@@MapleLeafCustoms I always watch ur videos u got me into airbrushing shhhh don't tell nobody 1 whole year