DIY - Floating Table Saw Outfeed Table 

Cool outfeed, but watching you drill through the cast iron table was gut-wrenching :) (I have a Sawstop PCS, too. I could never do that!)

Interesting modification to the saw, Izzy. I wouldn't have the courage to drill into my tabletop like that but it worked out well. Hope you keep healing. Bill

LIKING it that you have someone helping you, remember using the chair isn't a bad thing,.. it is a relief to be able to sit down,.. and to wheel around while in a chair?,.. dude, that's the cats meow! remember, there is a positive side to it all, faith that you can overcome with proper healing

I love anyone who drills right into a Sawstop without compunction. That's my kind of shop right there. Glad to see you're still kicking a**, Izzy!

Eat healthy and exercise Izzy, your one of my favorite woodworkers out there. Love to see your content and brain at work and we all wanna continue to watch. Hope your back is doing well and look forward to anything you have to show us. I learn something in every vid

don't like seeing you back in that chair; hope you're ok.

International / Industrial ...what's in a spelling mistook ?? Looks a nice strong build. At first I thought it was you jumping in the floating extension, then realized it was the Young Clone/Paduan apprentice

Not a fan of attaching power tools to the wall. Sooner or later you'll run into an operation that will require more feed space to the right of the blade.

Hi Izzy, Great project. Can you share some information about the music? Thanks for your great videos!

Nice. A couple of angle bar brackets screwed to the legs would have done the same thing, saving you from drilling thru the top.

You do some amazing things and loved the music. Thank you for sharing.

Actually, Izzy, ISO is the acronym for International Organization for Standardization based in Geneva, Switzerland (hence ISO rather than IOS 😁).

Gotta say I loved the musical background. Energized me and made me want to go to the shop and build something!

Well there is that other "ISO" out there with "international" in it's name "International Organization for Standardization." So I give it a pass, because I didn't even know about "Industrial Standards of Operation." Learn something everyday. 👍

Izzy how is the back issues going? I noticed the wheel chair in the last few videos. I hope you are doing well.

Great job, it seems too strong and stable. Best regards from Brazil.

Lmao...Where do you get your soundtracks?

Izzy. Hope you and yours are well and remain so in these difficult times

Just wanted to say I love you Izzy swan just putting it out there🤤

While listening to this video I kept expecting a dead guy wearing sunglasses to show up. I figured that he might be thrown on the table to test it. Weekend at Izzie's?

For a moment...the words sounded like "your mama". Fighting words to some.... Love ya'! PRAYING for your continued progress! 😇😎

I can't believe you destroyed that table saw top!!!! How dare you!

Great idea Izzy! Craziness to drill through the top but awesome all the same! Just curious what saw stop saw is that? If that's all you need with the things you build then i'm sold!!! Cheers!

Music source? Good summertime party music.

Hover-saw?? Maybe in the future?

International, industrial meh, but who's splitting hairs lol At least you didn't say the international industrial standard :P

Couldn't help commenting. Izzy did you mean ISO as in ISO 9001?. If you did then it's the International Standards Organisation. Great to see you're back on your feet. I've missed a few vids so haven't seen when that happened. How's the back doing. Keep up the great work !

Nice Izzy. I have a Incra TSIII fence. T bolts on the bottom of the fence rails hold 2 square tubes that extend out the back of the saw and support my out feed table. Same effect with no modifications to the saw. In use something like 10 years. You will love yours.

Fun watching the skills 💪We make things so complicated. Not Izzy. 🎯Watch and learn.

I'm diggin' the tunes Iz !! And I'm with you as far as having all the tools off the floor . Man that'd be awesome ! Glad to see you're doing so well bud. ;)

ISO is not an acronym and it doesn't mean industrial standards of operation either. People often tend say International Standards Organization thinking ISO is an acronym...but that is also incorrect. It's just a name for International Organization for Standardization. An acronym for International Organization for Standardization would be different in a variety of languages so instead the founders derived ISO from the Greek word "isos" meaning "equal"...which is the premise of standardizing. Regardless of the country or language it's always ISO.

I was so excited to watch this to realize that I can't do this due to the design of my fence. :(

You just got a like and a subscription just for dealing with comments about yr music selection. Christ how petty.

Izzy while watching you video there were all kinds of idea's going off in my head on how to this and incorporate other tools into the out feed table or having an out feed table that has rollers and locks in it could be used also for other tools thanks for all the idea's and god bless you

IZZY Don't weeble wobble you countersinks in the hole That ruins the ability od the tool to product precise angles. Countersinks should be selected with an angle that matches the screws you are using. Machine screws will almost always be 82 Degrees included and Aircraft outer skin fasteners are 100 and sometimes 120 degrees. Wood screws like Sheetrock and others don't really h ave a standard.

So, you screwed it into the wall.......guess you’re not planning on moving the saw anytime soon...... ;-) ;-) ;-)

UGH, drill through the table... so many other options. And screwing to wall? So few of us have the option to leave our saw in one place without moving.

overkill, few hinges and couple of folding legs would do fine. it doesnt have to support this weight. probably not much more than sheet of plywood.

Very cool and clever idea. It's nice to see you recovering pretty good. Izzy please try to maintain your weight. You're looking smart. Regards from Karachi. 💐

You are one of the most inventive people I have ever "known" best of luck with the back izzy!

great Izzy a hug from Italy.💯👍👏👏👏👏👏👏❤️

So happy to see you standing Izzy. Been missing and wondering about you. Hoping you’re well sir.

Disappointed in this guy. Does not respond to DM’s about his website and the products he is selling. Yes that’s right, sent him a message over two months ago and followed it up again and still nothing. 👎👎👎

nice working area

You had me interested until you drilled through the cast iron wings. Thats never going to happen.

What happened to your rikon table saw?

Needs to fold down.... Some people don't have space, good start.

My jaw dropped when you drilled through the surface of your table saw. I see why you did it, but it still stings. The poor thing. Just kidding. Great video.

Dood.....I wish I was your neighbor. We could conquer the world.

4:09 the lyrics, "Incest Survivor" WTF in a upbeat song?

Awesome!

Hi Izzy a frightening thought just ran through my mind....what would you do if there was no more plywood in the world ?? kind regards from the UK... keep well

Nice job 👍

Anyone have a link for the giant t-square he uses? That seems... very useful.

Very simply I like it.

All fully floating shop with nothing on the floor would be amazing! I have to say I cringed a little when you started drilling holes in the Sawstop. I know it didn't hurt it, but yikes. Also glad to see that I am not the only one who thinks an air nailer is a hammer as well. Be well Izzy, love your work.

I like the music. Izzy, can you please list the artists?

Why you sit on that Chair again? Hate to c u on it again.. wish you always a good health👍

Awesome!

Hey is there any chance you could turn the volume on the music down a bit, I'm constantly adjusting the volume up and down so that I can hear you talk and tune out the repetitive music

I think this is the only video of yours I've ever watched on mute lol

Hey Izzy I'm in the process of laying out my shop I have that same saw with the rails that allow a 36" cut. Are there any down sides to putting the right side of the saw tight to the wall. the only thing I could think of is cross cutting or doing a dado across a long board.

Mr Swan I like Destine And love the Doo wop music

OOOOO....YA.......MAMMA.......GOT........NO.......TABLE.....LEGS!!!!!!

Who wants to guess the number of people who paused @2:09 to type a gotcha comment and then had to delete it a minute later?

What can you do if you DIDN'T have a brad gun???

Izzy is on a quest to rid this world of legs, 😂 This was a great idea and execution sir, loved it

At 1:14, the sander almost sounds like it's part of the music....did you do that on purpose or was it just a happy accident.

Ouch, he drilled holes in a beautiful saw top! 😬😬😬

If I could rate this Video from "1 to 10" I would give this video a "6" just because of the UN-necessarily Loud music that took away from the build! So it's a Thumbs Down! I hate, Yes HATE Loud Music on these kinds of video's! My Opinion! LLAP

drilling into that saw stop table had to be nerve racking

It's okay Izzy, should be international!

@Izzy how is the first song called?

Hombre excelente trabajo y muy buena la música mis felicitaciones desde Argentina. Soy un gran fan de tu trabajo.

Great job izzy! I did a very similar outfeed table for my saw. I love not having legs on the table to bump into.

ISO International Standards Organization

How can I go about hiring you @ Izzy swan

Great stuff Izzy. Keep up the great stuff and stay safe 😉🇦🇺👍

Jinny Craig!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

What brand is the countersink bit?

👍👍👍👍👍.

Great to see you doing well and working sir.

who makes that awesome chamfer bit?

Really fantastic work, Izzy! It's pretty strong! 😃 I hope you're getting better there! Try to stay away from that chair!!! 😉 Anyway, stay safe there with your family! 🖖😊

You’re looking good, Izzy, almost buff and definitely leaner, still handsome. Great outfeed table. 🇨🇦💝🇺🇸🙏👍

Love the music in this video!

Nice! I guess I figure an outfeed table is kind of a safety thing. Get your material far enough through and you don't have to let it fall on the floor or try to catch it coming off the table. Planning on a 6 foot outfeed table for mine and just got some good ideas from yours. Thanks.

انت حلوه علشان انتى دلوقتى فى السما

Wish I could do that with my Saw...my Portercable Table saw uses a fence that, while I really like it, locks on the front and back rails, so for me to actually put an out-feed table I need to change out pretty much all that. I've looked and looked and looked, and NOBODY appears to have created and out-feed table for my saw unless it is one you "back up to it", and those aren't setup for running your Miter Track in. UGH...Can't afford a Saw Stop, or any of the other saws that allow for this, so...roller stands it is...and dropping the offs onto the floor. :(

Nothing in the workshop on the floor.... now wouldn't that be cool!!!

You got any megadeth?

Very innovative and creative but...drilling holes into a $2,000+ SawStop...*groan. Good to see you in action though!

At 6:04 the bit stuck in the screw. I have the same Dewalt bit holder and it always drives me crazy when it's stuck in the screw. It happens more in torx screws, but it's still annoying.

👍🏻👍🏻👍🏻👍🏻👌👌👌👌👌

Nice build buddy. Just a couple things: 1- I completely agree that nothing sitting on the floor would be great! Easy clean up. 2- I was floored that you or your helper used a mostly manual screwdriver. Considering your admiration of power tools especially electric drills it is refreshing that you haven’t forgotten your roots. Take care my friend, I do enjoy your videos.

Couldn't make it through the music. Thanks for sharing anyway.

Please don't get the wrong idea about me, but I think you look so much better without that ridiculous reversed cap!

Interesting build!!! Great Job!!! Looks Awsome!!!! I would have never thought about making it that way!!! Thank You Sir!!! 🤔👍👊😎😀

WTF IS THAT MUSIC

Love your channel man! 🤙 P.S. Where do you find all the weird background music for your vids?