DIY, full-size FOLDING poker table! Cup holders solution is amazing. 

Thanks for watching and tip!

Everybody loves them! Out of the way when not needed and the beer bottles don;t interfere with play! thanks for watching

so far so good. I haven't had any issues. thanks for watching

Thanks 👍

thanks!

Hi, I had a hard time finding them. They are actually mad for cars and boats. A few sites had them, but the best price was at Aliexpress, here: www.aliexpress.us/item/3256803252766487.html?spm=a2g0o.ppclist.product.38.1013iRakiRakVe&pdp_npi=2%40dis%21USD%21US%20%2417.30%21US%20%2413.15%21%21%21%21%21%402101ea7116827836471328167ed2e8%2112000027006456445%21btf&_t=pvid%3A5089f09b-49c3-4da7-b965-51bfbee955e5&afTraceInfo=1005003439081239__pc__pcBridgePPC__xxxxxx__1682783647&gatewayAdapt=glo2usa Thanks for watching

Thanks. I appreciate it

I used the folding mechanism from an old poker table i had bought several years ago. So i don't have a link to share. thanks for watching!

It was about $380

Where did you get those legs ​@@letsdiy2gether239

Hi, i bought everything at Casinosupply.com. Here's the list Modena Poker Table Rail Vinyl (9ft), Poker Table Rail Foam Sheet 70 Pound 1" x 54" x 105" (1pc), Volara Poker Table Foam Padding (1 10ft piece), Pro Two-Tone Suited Speed Cloth - (Sold Per Running Foot) Red (9ft). Thanks for watching

@@letsdiy2gether239 thank you!

It's about 8.5ft X 4.5ft. I have 10 players fit very comfortably.

They are actually made for cars and boats. A few sites had them, but the best price was at Aliexpress, here: www.aliexpress.us/item/3256803252766487.html?spm=a2g0o.ppclist.product.38.1013iRakiRakVe&pdp_npi=2%40dis%21USD%21US%20%2417.30%21US%20%2413.15%21%21%21%21%21%402101ea7116827836471328167ed2e8%2112000027006456445%21btf&_t=pvid%3A5089f09b-49c3-4da7-b965-51bfbee955e5&afTraceInfo=1005003439081239__pc__pcBridgePPC__xxxxxx__1682783647&gatewayAdapt=glo2usa Thanks for watching

You can find them on amazon, but i bought them at AliExpress. Here is link for Amazon: www.amazon.com/dp/B09VFHS2G5?psc=1&ref_=cm_sw_r_cp_ud_ct_C5PFF5AA9Y9NPYBYQWYY thanks for watching

With the vinyl, foam, wood, speed felt and cup holders, I spent about $500 all in! (pun intended) Without the cup holders, it was about $380. Keep in mind I already had the legs, so not sure how much that will run. But this is better quality than you could get for that price. 😀Thanks for watching

They are actually made for boats. A few sites had them, but the best price was at Aliexpress, here: www.aliexpress.us/item/3256803252766487.html?spm=a2g0o.ppclist.product.38.1013iRakiRakVe&pdp_npi=2%40dis%21USD%21US%20%2417.30%21US%20%2413.15%21%21%21%21%21%402101ea7116827836471328167ed2e8%2112000027006456445%21btf&_t=pvid%3A5089f09b-49c3-4da7-b965-51bfbee955e5&afTraceInfo=1005003439081239__pc__pcBridgePPC__xxxxxx__1682783647&gatewayAdapt=glo2usa Thanks for watching

I bought everything at casinosupply.com. I included the items in the description. Thanks for watching

No bridging. The legs i took from the other folding table hold up pretty well. Thanks for watching

I bought everything from www.Casinosupply.com. Thanks!

With the vinyl, foam, wood, speed felt and cup holders, I spent about $500 all in! (pun intended) Without the cup holders, it was about $380. Keep in mind I already had the legs, so not sure how much that will run. But this is better quality than you could get for that price. 😀Thanks for watching

Hi. I used 1 1/4" screws. Thanks for watching

In the 1/2" plywood?

misread, i think i used 1/4" screws

Hi, I had a hard time finding them. They are actually made for boats. A few sites had them, but the best price was at Aliexpress, here: www.aliexpress.us/item/3256803252766487.html?spm=a2g0o.ppclist.product.38.1013iRakiRakVe&pdp_npi=2%40dis%21USD%21US%20%2417.30%21US%20%2413.15%21%21%21%21%21%402101ea7116827836471328167ed2e8%2112000027006456445%21btf&_t=pvid%3A5089f09b-49c3-4da7-b965-51bfbee955e5&afTraceInfo=1005003439081239__pc__pcBridgePPC__xxxxxx__1682783647&gatewayAdapt=glo2usa Thanks for watching

As I mentioned, I already had folding legs from an old table that I used. But, what i would suggest, is to go on amazon and look for Heavy Duty Folding Legs. You'll see several options and pick whichever work for you. Good luck

Lol. I'm having too much fun playing cards with the boys! Thanks for the offer

Hi, yea if you wanted to add LED lights and a high railing, you would need an in-between step before you add the rails. In the in-between step you would build out the high rail. In my opinion, putting a high-rail on a foldable table might cause issues. Not sure how strong the MDF would be, I'd be concerned about sagging. Good luck!

MDF is heaver than plywood. If you added a raised rail you wouldn't be able to fold the table the same way, if at all.

Appreciate the complement! thanks for watching

Its about 60 pounds. thanks for watching

I did use 3/4 to give a little bit more height, but I also felt the 3/4 would add a bit more rigidity to the 1/2 playing surface. Thanks for watching

We(recently retired poker pals) finished our table using only 1/2 in ply and no legs as we are using a standard folding table as a base reasoning that pretty much everyone has one around. Our game travels every month so we needed something lightweight and your plans fit the bill. Thanks again for posting.