DIY Gravity Feeder For Under $100!!! 

The stress on those legs will be immense when you fill that 55 gallon barrel with corn from an engineering stand- point. I would advise installing a yoke connecting each leg to each other to reduce gravity stress. Three pieces of preferably flat steel ( or fence pipe) bolted into the existing legs. The lower the installation of the yoke on the existing legs the more force it will be able to withstand. Mid height would be sufficient. Once that barrel is filled to capacity without the yoke just simply shake the barrel slightly and all will become evident. Yoke it and see the difference. If those barrel legs fail when you are filling the barrel with corn, there could be a serious injury. You must remember that a 55 gal drum filled with liquid is almost 500 lbs. Now corn is not liquid obviously but you get the point. (350-400 lbs. for corn)

I don’t recommend metal drums. They sweat on the inside due to temperature difference between inside vs outside. That means mold. Plastic allows the two temps to balance out better. Just a thought.

Nice video buddy I wanna see some more hog vids 🔥 thise was really cool I need to build me a feeder I been doing a lot of management lately hinge cuts and working on food plots

I see that getting tipped or knocked off easily by a hungry aggressive deer....