DIY Halloween Cemetery Fence 

Here's a tip for spray painting sections of this type of fence. I hope I can make this understandable, stack the sections on top of or in front of each other in a slightly staggered pattern as so when you look at the sections you see all of the PVC pipes from the front to the back. This way you get more coverage per pass of the rattle can with less waist due to over spray. I hope this makes sense, it really saves time and resources.

Definitely the most awesomely decorated house in the neighborhood! The fence really adds so much to your spooky effect. I don’t think I’d ever put this much work into decorating my house, but I enjoyed seeing how you did it.

Thanks so much for this video. I’m nearly done building 3 panels using your design. I did drop the top rail down 3”, like you wished it was lower. Painting takes awhile. The Rustoleum spray paint is worth the expense than buying the cheap project paint. A can of Rustoleum goes a lot further per can.

Thank you for this. I've seen many other channels show their fences but not show step by step how to make them. Thank you again!

This is so cool! It’s on my project list for next summer. I’m going to do the pillars too. Thanks for the great videos.

This is fantastic! Love that you literally show step by step!

Thanks man I’m about to start making mine in the next day or so.

That's an epic build

Badass fence, awesome video and amazing detail, wish I could find someone that loves Halloween this much lol

These are so very cool I am going to try to make these this year

Awesome work 👏 👏👏👍Thank-you for sharing.

very informative, I never thought about the 'treated ' furring strips' ive always used the cheapy 98 cent ones for mine, not much quality and hard to find straight ones- very prone to warping I may decide to use higher quality on the fence-

2:55 Looking at all the cut marks you drew, it makes more sense to make a stop block to cut and repeat. No need to line up the blade with the cut mark.

This is great!

House looks great!

Fantastic video!!!

I just built 2 fences 8 foot long. Wasnt hard at all. I used the 1x2 and paddle bit which was very harsh to the wood using a compact. Worked out fine. After creating 1 8 foot length with holes, that became my stencil to build more easily and faster. The dollar store has broom stick handles for a buck. So i had bought plenty for the fence built. I didnt put the wave in the fence built but im gonna build more fences for the rest of my yard with the staggering height to add the wave. The fence felt sturdy and strong. I didnt add the 4 inch rings but i did add skulls for every other opening. Came out very nice. I bought the same finials like your and i actually advise they are very sharp. I would suggest to buy the quad flare finials they look a bit taller and also have the ball on top so if anyone knocks it down by accident the finial wont punture the person. Just my opinion. Happy haunting. I also didnt use 18 holes i did 12. So maybe thats why the skulls fit perfectly. Cost would be very cheap. I would say 20 bucks a fence without skulls and paint and fenials. Okay so maybe 35 bucks now a fence.

Erik - I'm working on building this design. Thank you for the helpful video! For others asking for the space between the holes on the 1x2 it looks like it's about 5 1/4 inches.

Fantastic

Honestly. Its a little too good. It looks like that could be your real fence and you just added the skulls. :)

Awesome!

Please make more Halloween tutorials!

So cool. with prices now days of pvc its gonna cost a arm and leg. Very creative!

looks pretty professional to me.

Awesome video! Can u do a video on how u make pillars

what distance did you measure from center to center on the pvc?

May I ask what is your layout on the 1x2 for the 7/8 holes from the end of the board to the center of each peace of 1/2 pipe?

can you add your part list with links to your description?

Great job, rhinking of possibly doing something like this. My opinion, paint the pieces before you build it. There is a lot of empty space in the completed sections. Then touch up any marks.

What is your measurement on 1x2 for your spacing for pvc

Awesome video, thanks Erik! Hey are those Finial's plastic or steel? Thanks!

What is the distance you measure for the holes how far apart are they?

Idk if this has been asked.. but where do you store everything?

Pilar video please!

Can you tell me how much space in between each pole line mark and on each end? Thank you.

Awesome tutorial! Thank you for sharing your creativity. One question I have always had, is for DIY prop and decoration makers, WHERE do you store your creations in the off season? I had some of mine stored in our garage, maybe you are fortunate enough to not have the problems I do, but I found out the hard way that mice LOVE to chew up that foam insulation and other materials to make their nests 😥

Can I ask about how much it cost you to do all of the fence including the skulls? Also, what was the total time invested to make it?

What was the price for all this?

What holds these sections of fence in your yard? Are they just connected to a post in the ground?

Looks great. How did you end up doing the pillars? Also, how do you have it standing up? Do you have stakes in the ground or some sort of support? Thanks for posting.

How much pvc did you have to buy?

What are the black plastic piece called on top of each PVC pipe? Where can I get some?

Hey Erik, do you remember how many pieces of 1/2” pvc that you used?

Building this today…did you end up using the drill press with the forstner 7/8 bit or the regular drill? Wasn’t clear on that. We are using a drill right now with the bit and man is it hard.

Erik, how did you anchor them to the ground?

What’s the trick to not splintering the wood with the spade bit?

Erik - Did you happen to make a video of your pillars?

Hi, please share the website for the fence spikes. Thanks

Wow! Awesome! How many years did it take to complete this? 😅

After Halloween I'm going to finish fencing the whole yard with this why pay a fence contractor?

Honestly after last year my fence didn't go so well. I bit the bullet and bought the fence lol. Spent about $300 to get the 49 inch tall black metal fence that home depot had. It covered the whole front yard and will pair nicely with my pillars and the amazing stone gargoyles Home Depot has for 2021 Halloween.

how did you make your pillars?

Wheres the pillar video?

Great info what is the the item number on your finial?

Lol set a block on the saw so you slide the pipe or whatever up against it at the end and no measuring needed and all pieces will be the same size. Just push to block, cut, cut piece falls away…..,repeat. Work smarter not harder.

That's how every fence around every home in my country looks like, but from real reinforced concrete and metal. It's disgusting that you have open front yard, when bad times will come, and they will, you will wish to have fully fenced property.

The diy intro for the fence is so loud

Cool project but the camera work makes me nauseous...

Than “HOW” do you make the pillars?!😠