DIY: How to build the PERFECT campervan TABLE (for under $30!)

Подписаться 51 тыс.

Просмотров 29 тыс.

50% 1

Our 1983 Ford Econoline campervan did not come with a table so we decided to make one ourselves! We wanted to build a budget-friendly swivel table that works perfectly for eating AND working. This lagun-style system van table can be adapted for any van so we hope you find these steps helpful to build your own van table!
If you have any questions about our table build, let us know in the comments!
☕ If you found valuable information or entertainment in this video, consider buying us a coffee! www.buymeacoffee.com/ericands...
✏️ Need help trip planning? www.thatch.co/@ericandsarah
📰 Curious about our BTS thoughts and plans? ericandsarah.ca/newsletter/
☑️ Don't want to miss a single video? bit.ly/3GFOggr
💰 Prices for supplies:
Steel pipes - $16.75cad
Connectors - $5.10cad
Flange - $6.42cad
PVC pipe - $4.97cad
PVC cap - $1.20cad
Straps - $3.35 cad
Tabletop - free!
TOTAL = $37.79cad = $29.17USD
/// THINGS WE RECOMMEND ///
📷 Van supplies and camera gear: www.amazon.com/shop/thebomsaway
🤕 International travel insurance we use and trust: safetywing.com/?referenceID=t...
🎵 Music we use in all of our videos: www.epidemicsound.com/referra...
/// OTHER VIDEOS YOU MIGHT LIKE ///
🚙Pre-reno full van tour : bit.ly/3Tnr4Jv
🛠Van conversion in 10 mins: bit.ly/3wAWwKi
🔨Van build start to finish: bit.ly/3cycxdf
/// LET’S CONNECT! ///
📱 Instagram: / ericandsarah_
🙂 Facebook: / thebomsaway
🖥 Website: www.ericandsarah.ca
For business inquiries, email business@ericandsarah.ca
/// ABOUT US ///
Hi! 👋 We are Eric and Sarah, a couple of Canadian adventurers! We’ve been married since 2017 but have known each other since we were only 6 years old! After travelling in Latin America for over a year, we bought an old 1983 Ford Econoline Campervan and started our Vintage Van Life. Our desire through these videos is to provide helpful and inspiring content for other travelers and vanlifers while also showing people around the world how beautiful this planet truly is! Thanks for following along and please leave a comment to say hi!
FILMED JUNE 2022
Abbotsford, BC, Canada
#campervan #vanlife #vanbuild #vanconversion #campervanbuild #vintagecamperrenovation #diyvanbuild #diyvanconversion
*** Disclaimer: Some of these links are affiliate links where we earn a small commission if you make a purchase at no additional cost to you.

Хобби

Опубликовано:

8 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 110

@mrmotofy 2 месяца назад

For height adjustment set for the lowest height as you did. Then drill a row of 1/4" holes vertically say 1" increments maybe 6 of them, in the bottom of the PVC pipe all the way through. Get a pin that fits all the way through and lift pipe slide pin at desired height. Black pipe will sit on pin and still rotate. Just watch for clearance for a countertop overhang. May have to add a spacer block or cut countertop back flush. I have a new vid on it

@emmashaye 16 дней назад

This is so great! Amazon really only has one swivel table and it's $100+ -- I'm going to attempt this tomorrow!

@CHICOandtheVAN 10 месяцев назад

Im stealing this idea😎

@Elegrawats 2 месяца назад

Can’t tell you how thrilled I am to have found this video. The Lagun mount is too large for our little van and I was fast running out of ideas - thank you so much!

@carolannwilliams9512 12 дней назад

Thanks ! Awesome idea

@OTWD_yt 2 года назад

Really coming along guys brilliant idea with the table can’t wait to see your adventures in the van 😊❤️

@EricandSarah 2 года назад

Thanks guys!! Adventures coming very soon!!

@daviddring8692 8 дней назад

Brilliant isea. But takes some believing to say it's stable. With such a small part that fixes it to top I'm sure it will move quite a lot if you leaned on one edge. I might try to find a piece of metal similar size to lagun type

@EricandSarah 8 дней назад

Definitely! It will twist if you put too much weight on one side. What you could do is a screw/pin on a flat piece of metal similar to the lagun tables. Attach it to the round base so it still spins. Then you just have to have something to spin the table onto so it’s all separate & saves space for storage. Good thinking!

@lauriebauer6909 2 года назад

Great project. Was going to buy a Lagoon table but now I'm stealing this idea for our camper!

@EricandSarah 2 года назад

Awesome! Let us know how it turns out 😊

@bobstewart4342 Год назад

I'm borrowing your idea

@nonyabiz550 5 месяцев назад

Just needs one more joint tonfold flat against the wall. Why not go the one extra step aftercall that?

@PaulSchortemeyer 4 месяца назад

Great idea 😊 But how??

@nonyabiz550 4 месяца назад

@@PaulSchortemeyer There's a company in U.K. making them but the two parts are $200. I'll post the link when I have time. Somebody should get them and copy it

@PaulSchortemeyer 4 месяца назад

@@nonyabiz550👍 thanks!

@sarahmp6706 18 дней назад

@@nonyabiz550hey did you make the table fold?

@nonyabiz550 17 дней назад

@@sarahmp6706 I haven't yet. I will post it when I do

@Paul.Douglas 2 месяца назад

Nice DIY! I want to do this for my recliner to have a laptop handy, but easy to swing out of the way.

@MacTravellers 2 года назад

Pipes can be used for so many projects, great idea!

@EricandSarah 2 года назад

Very true!

@bodvargregersen5161 2 года назад

The video of how you built your combination work and dinner table was absolutely interesting. Your Canadian ingenuity won the day! I cannot wait until you take us on the road through Canada!

@EricandSarah 2 года назад

Thanks!! We’re quite happy with the result 😄 And cannot wait to show off Canada VERY SOON!

@DavidandSarah 2 года назад

The van is really coming along. We look forward to seeing your first destination 😊 BC is beautiful! We're heading to Kootenay and Yoho for the next couple weeks 😊

@grannypeacock1218 Год назад

😀 beautiful simplicity!!! I'm going to do this in my minivan.

Год назад

What an awesome build! How do you stop the connection points of the metal pipe from unscrewing, so your table top doesn't tilt and has things falling off? Did you weld them together?

@rangovanlife 6 месяцев назад

Thanks for the tutorial I will definitely do a smaller version for my tiny van ❤🌹👋🏽

@KDawg01 10 месяцев назад

Great job‼️ Nice idea!! I’m going to be using the similar idea for our conversion trailer.

@HaveNoPlan Год назад

Great job now you got me thinking of making one for my ford e250, I just put a swivel seat in so I would love to try this.

@EricandSarah Год назад

Right on! So nice to have a swivel seat too

@GladysandKenny 2 года назад

Love the table. So functional!! I really like the color. I (Gladys) love dark wood. Our tiny house has dark would as well. Can’t wait to see the finished product 😁

@EricandSarah 2 года назад

Thanks! We looooove dark wood as well! Always looks so classy 😄

@nikola1209 5 месяцев назад

guys! Thank you sooo much for sharing this idea! It's amazing! :) All the best! :)

@michele2017promastertravel 6 месяцев назад

Great video. Thanks. I'm trying to rework a diy lagoon and now I know how to get er done.

@EricandSarah 6 месяцев назад

Get er done bud! Glad this helped 🙂

@DahltonDoes 4 месяца назад

One thing that you can do to lower costs is use emt 3/4in conduit, not to mention it's far lighter, and you can still use those iron fittings or use Maker Pipe custom fittings... However really great video!

@EricandSarah 4 месяца назад

Great suggestion!

@mrmotofy 2 месяца назад

Not near as sturdy as black pipe. For something you're gonna have meals and laptops on there worth over 1G easy...better to have sturdy

@2ndSprings 2 года назад

Great design on the table. Great video series on projects like this. Keep on keepin on.

@EricandSarah 2 года назад

Thanks Brian! 😄

@OverlandOne Год назад

Very nice job, that looks great and is super functional. Safe travels.

@EricandSarah Год назад

Thank you! So far it’s been working great :)

@doidrovo 2 года назад

The table looks awesome!!! 🤩👏🏼✨

@EricandSarah 2 года назад

Thank you!! So happy with how it turned out

@JoeyTheSinic Год назад

Dont need it for a rv but i wanted a quick diy swivel keyboard table for my garage workbench. Thanks.

@jodyseaman1885 Год назад

Good job, that turned out great. Like the wood table top.

@EricandSarah Год назад

Thank you!! 😊

@Jetmab04 2 года назад

Just. 💕💓💕 Well done!! Happy to see your relaxed smiles and, your home looks beautiful 🤗

@EricandSarah 2 года назад

Thanks! We’re so happy with everything… going to feel so good to finally be on the road 😄

@Jetmab04 2 года назад

@@EricandSarah 😊 on the road...any plans where to go to first?? I just can't wait to get to Ecuador but, still have to wait for my pension or, I could go now but, would then lose it all so, I am staying.....ok, love Ireland but, as I am sure you know, when one have made a decision it just has to happen now....never thought I would come to this point when I am looking forward to "retire"...do now but, as I am sure you also know, I have no plans to stop working online which can be done From the jungle 😊 Can you make a living working online while travelling!? I hope you can!! Have a good Sunday!!

@novelistusonthewater Год назад

I'll build the same table for my sailboat but I am not sure yet on how I will make it LOCK in position when sailing. Maybe you hae done something like that already. But then you probly either drive or sit, so no need for table repositioning while driving. Yes, it will be put away for the heavy sailing. Maybe a pin through the flange for fixing the table from turning on the thread and something like a bicycle clamp for the bottom thingamabob... anyhow, great job and greetings to BC ...

@EricandSarah Год назад

Oh cool! We haven’t looked into any locking mechanisms because we always detach it when unneeded… but keep us posted what you design because we’d love to hear it! 😊

@kamalpanesar5315 Месяц назад

Awesome idea❤ Eric i want to make this for my sofa side and use for my laptop .......how can the plastic pipe remain stable and fix ???

@sailingeden9866 8 месяцев назад

Great idea.

@M.Rawlins 9 месяцев назад

Looks awesome! Thanks😊

@EricandSarah 9 месяцев назад

Glad you like it!

@LibertySerenity 4 месяца назад

Great table...does it fold down for storage or do you take the tabletop off?

@EricandSarah 16 дней назад

@@LibertySerenity we just take the top off :)

@dharmalovemay Год назад

Thanks for a great tutorial! I followed this exactly and discovered that the inside diameter of PVC pipe differs. I have 3/4 in steel pipe and 1-in PVC and it will not fit in it :-( back to the store again😂

@serenityjewel Год назад

Thank you so much for this design. I need a place to create art in my minivan so my table needs to be at least 22 x 30 in. Do you think one center plate in the middle would be enough to hold it steady?

@yessicahernandez7800 7 месяцев назад

i love it

@MaddyandSascha 2 года назад

So simple and yet so brilliant table solution! The wood looks amazing as well. Do you have a specific place to store the plate and lock the pipe construction?

@crabbyoldlady8162 2 года назад

I have the same question!

@EricandSarah 2 года назад

Great question! The horizontal steel pipe and connector fit on a little ledge under our couch and the tabletop fits behind our couch or under the top bed. Maybe we’ll try show you in a future video :)

@steffis2157 Месяц назад

Thank you for the inspiration! Just one question - in my bulli it would be in the way some times - is it possible to put it off an on?

@Marceesoff 2 года назад

Love your videos ✨ been following since you guys came to Guatemala 🇬🇹

@EricandSarah 2 года назад

This makes us so happy! So glad you’re following along :)

@billbot3000 2 месяца назад

Hey! Just wanted to ask the measurements of your table? It looks like an ideal size and I can't seem to get the size right for my van. Thank you guys!

@bourdon845 5 месяцев назад

Cool !

@lesvoyagesdelouis6574 5 месяцев назад

Cool

@hilariobarrera-vk1ok Год назад

❤loved tank’s

@tinrat-n-teet Год назад

Just bought the stuff to make one , identical stuff by the looks of it, Home Depot in Vancouver

@EricandSarah Год назад

Oh awesome! Let us know how it turns out 😄

@superblondeDotOrg 8 месяцев назад

Nice design. How about using EMT conduit (metal pipe) instead of black pipe? It is lighter than black pipe and still maintains the needed strength.

@EricandSarah 8 месяцев назад

Great idea! Would definitely consider doing that next time. Thanks for the input

@atozsellingnow4442 10 месяцев назад

Great table wau amazing. ❤

@EricandSarah 10 месяцев назад

Thanks!

@Nowindresistance Год назад

I’m trying to figure out how to do a swivel table that is also able to adjust vertically. I was thinking to install two pvc pipes with end caps at different heights so I would be able to lift the table out of one and put it into the other. Might have to put a strong bracket at the bottom of each pipe since it would be raised off of the ground. Any other ideas?

@JayZoop 9 месяцев назад

I might do that in my camper if the cabinets are strong enough. How much weight does yours hold? Could it hold a microwave?

@KlouseInTheKloudz Год назад

Do you ever have any issues of the table being in your way when getting in and out of the side doors?

@cindybovenistier9672 3 месяца назад

Hi. We're also in the middle of our diy campervan build and like the idea of the swivel table. However, we think that the table will move away from us while eating, sice it's not loked in place. Any idea's how we can lock the table in place? I thought about drilling a hole trough both the pvc and metal pipe and put a pin of some sort trough it. Anyone tried this out allready?

@prophetseven728 Год назад

Doesnt this table get in the way though. For getting around? Can you remove it?

@danrobrish3664 2 года назад

Brooke is adorable!

@EricandSarah 2 года назад

Isn’t she?! We wish she was ours 🥰

@danrobrish3664 2 года назад

@@EricandSarah No matter how much she begs you, don't let her drive the van.

@karafrantz2763 2 года назад

Great Luna table! Q? Can the table fold down out of the way?

@EricandSarah 2 года назад

It does fold down but takes under a minute to twist of the table and the horizontal steel pipe and those go under/behind our couch!

@philb4626 Год назад

Am i doing something wrong? ¾” steel pipe at Home Depot doesn’t fit into their 1” pvc. alternatively, ½” doesn’t fit into ¾ pvc. Any insights on that?

@EricandSarah Год назад

Was the 1/2" too loose in the 1" pvc? Seems weird. Unless they don't have them marked correctly

@philb4626 Год назад

@@EricandSarah yah the half once is pretty loose. Looking for something snug but loose enough to spin.

@Anthonyinkz 7 месяцев назад

🎉ok but what about hight adjustable

@EricandSarah 7 месяцев назад

Sadly no option for that but it works for us!

@unserhaus684 10 месяцев назад

Great concept. But I miss one thing. There are no stoppers, like on the Lagun. I'm afraid the table moves or you have to dismantle it before every ride.

@EricandSarah 10 месяцев назад

That’s an excellent idea! You could very easily install that alongside the base. Perhaps a hook of some sort

@vjmcdonn Год назад

Did you always leave it out or did you break it down and store it?

@EricandSarah Год назад

We break it down! I responded how on your other comment 😄

@kellyburian8903 Год назад

Need deeper screws if you don't table will dismount

@EricandSarah Год назад

Actually if we had deeper screws, they’d probably go through the top of the table. We also put 4 screws in once it was complete, which is overkill but that table isn’t going anywhere.

@JayZoop 9 месяцев назад

3/4 pipe is too tight of a fit inside 1” pvc at my hardware store. What am I doing wrong?

@EricandSarah 9 месяцев назад

Strange. Does 1/2” fit? I just sort of walked around until I found a good fit. But 3/4 should fit snug, so I don’t know.

@tuan-anhnghiem4344 2 года назад

how can the table top rotate against the flange?

@EricandSarah 2 года назад

The flange is able to swivel on the top connector :)

@MrBoxofplastic 4 месяца назад

How does it swivel on the phlange?

@EricandSarah 4 месяца назад

It just swivels smoothly on the threads of the phalange and the connector. If you place it right, it stays firm in place.

@barclayej 3 месяца назад

Scucum!

@allanb52 4 месяца назад

...or buy a folding camping table and use it inside and outside.

@kirbymoore492 11 месяцев назад

Cut all the cutesy, try to be funny crap out and you could’ve done this video in about 60 seconds

@EricandSarah 11 месяцев назад

But that would be a verryyy boring video and might as well just be a blog post 🤷🏽‍♀️

@kirbymoore492 11 месяцев назад

@@EricandSarah sorry to be so blunt but I think I speak for most people when they’re looking for information on how to do something on You Tube whether it be how to build a fold out, swing out table in your camper van or how to do a plumbing repair job or whatever, we are looking for information,. Cut to the chase, just show us what we need to get the job done please. If I want to be entertained i’ll watch TV or a movie.

@EricandSarah 11 месяцев назад

@@kirbymoore492 I understand where you’re coming from but our channel is not just a “how to” channel so our style is different. Most people watch our videos more for entertainment than facts so they appreciate a little personality. But we get that we’re not for everyone so we hope you find what you’re looking for elsewhere :)