DIY Keychains And Fridge Magnets For My Etsy Shop - Skulls Galore

Подписаться 1,9 тыс.

50% 1

✨Hi all, I have a chillaxing video today, no special technique, just me making some gothic/halloween inspired keychains and magnets for my Etsy (and craft stall table in July).
So please enjoy watching my process and how I make some of my items. If you have any questions please ask away, if you have any suggestions, please suggest away, I'm always open to advice and learning.
Also please do check out my Etsy shop, link below!
I tried to include everything I used in the materials below.
✨✨
I really appreciate any and all likes, comments and subscribes, as a new channel they really help push me out there and I would love to build an audience and join the crafty community.
------
✨MATERIALS:
Skull/butterfly mould: www.etsy.com/u...
(UK) JDiction Resin: amzn.to/42Rz4qo (2x UV resist)
(USA) JDiction Resin: amzn.to/3WoGjUq (3x uv resist)
(UK) Finnabair Underworld mould: amzn.to/45mHCYe
(USA) -
(UK) Silicone tool brush: amzn.to/3Ou4xdZ
(USA) Silicone tool brush: amzn.to/42ZJSCX
(UK) Finnabair colour waxes by ‪@FinnabairArtStudio‬ (I don't have a single link for these, I have bought them in many places over time, however if you want some of these other links holler at me and I will find them, otherwise I only have Amazon): amzn.to/43eugLv
(USA) Finnabair colour waxes:amzn.to/42RzFIE
(UK) Keychain bits (came with a letter mould): amzn.to/3IwcITb
(USA) Keychain bits with letter mould: amzn.to/3BKSLV0
(UK) Let's Resin chameleon mica powders: amzn.to/3BKi5dD
(USA) Let's Resin chameleon mica powders: amzn.to/3OtiyIJ
(UK) Pilot Gold paint pen: amzn.to/45lO2qa
(USA) Similar gold paint pen: amzn.to/3MquF6M
(UK) Art Studio magnetic craft tape: Therange.co.uk
Zuri silicone mould: hobbilicious.c...
Pearlescent powder: www.temu.com/g...
(Yes I bought from Temu, I caved).
I’m an Amazon affliate, any purchases made with my links will earn me a small commission at no extra cost to you.
--------
✨LINKS
My Etsy: jaroflooseskul...
If you enjoy my little resin experiments and want to help me out, please consider donating to my ko-fi page below to help me afford materials! Or consider buying from my Etsy!
My Ko-fi: ko-fi.com/loos... (it's set up for my art page, yes that's me haha)
------
✨MUSIC:
Las Palmas by Scandinavianz / scandinavianz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3ZNHGg2
Music promoted by Audio Library • Las Palmas - Scandinav...
Pina Colada by Konqeson / musicforall-61. .
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3GZmJbM
Music promoted by Audio Library • Pina Colada - Konqeson...
#mixedmedia #resincrafts #resinartist #gothic #grunge #resincoasters #jdictioncrafting #keychainideas

Развлечения

Опубликовано:

20 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@jaquelinepaul7384 6 месяцев назад

I cannot get enough of your artwork I love love love love love love your style I too love skulls❤

@looseskullsscrafts 6 месяцев назад

Honestly your comments made my day, thank you!

@WandasBlessedCreations Год назад

All of these are absolutely beautiful!! Thank you so much for sharing!! God bless!! 🤗

@looseskullsscrafts Год назад

Thank you very much!

@MarcysArtsyFartsyCreations Год назад

I've sat fascinated, almost mesmerized. Turned out wonderful!

@looseskullsscrafts Год назад

Many thanks!

@tinawheaton270 Год назад

Absolutely love these

@looseskullsscrafts Год назад

Thank you : )

@ursulamitchell6676 Год назад

I so love those molds. Colours are very nice as well. ❤❤

@looseskullsscrafts Год назад

Thank you!

@stacy_thecraftycat6611 Год назад

Micro brushes are good for molds with lots of details to get out bubbles. You do have to be careful on the ones that you brush with powders to not dislodge the powder, but they do still help get out bubbles. These are all gorgeous!

@looseskullsscrafts Год назад

Thank you, I did try mico brushes a couple of times, but I don't think I used them very well, I kept bringing in more bubbles lol. I'll try again more carefully!

@appleoneill5135 Год назад

Love these. I have also been making dinky little items today. It's been very therapeutic. Thank you for sharing, and many thanks for the tip of using tape, I hadn't thought of that ❤

@looseskullsscrafts Год назад

I found it therapeutic too : ) Hope yours came out well. Thank you so much,.

@aliasalien1806 Год назад

I don’t mind the bubbles at all but you can use vibrations. If you have one of those small hand held massagers found at most stores like cvs, Walmart, Walgreens etc. when you do the mold put the molds on a piece of thin wood when you pour them.Hold the massager under the wood and move around it vibrates the bubbles to the top. Make sure it’s one of those small massagers. It doesn’t take long and since you are using the longer resin you can come back and go it a couple more times. I much rather do this than hitting my silicone molds with heat which ruins them faster. I can’t say that it works perfectly everytime but it really helps. Love all your things

@looseskullsscrafts Год назад

Thanks so much for the suggestion, I will definitely see if any of my local shops have a massager - that's a great idea!

@SunshineSomeday Год назад

You are such an incredible artist. The way you layer the waxes gives such depth and interest. Definitely inspiring and I'm learning so much.

@looseskullsscrafts Год назад

Many thanks! I'm still learning but I'm really happy if any of my techniques help others.

@SunshineSomeday Год назад

We should never stop learning!

@looseskullsscrafts Год назад

@@SunshineSomeday Agreed!

@LadyKatJPhillips Год назад

Shake the mould back & forth , pick it up & drop it lightly, spray with 100% isopropyl inside but leave it in thecl mould to pop bubbles that come up. The alcohol will not leave a film on the front because no air gets to it. The back might(spray it also) itwon't matter if the alcohol leaves a film. Shaking a mould is better than "painting" the resin in. Your colouring technique is spot on perfection!!!

@looseskullsscrafts Год назад

Thank you for your advice, I will definitely try those next time : )

@LadyKatJPhillips Год назад

@@looseskullsscrafts Good luck m6 friend!! I subscribed so I'll keep cheering for you!

@iLitAfuseiCantStop Год назад

Such a cool idea & I love the addition of pigments! Do you have any idea where to get decent, inexpensive pigment powders? I’d appreciate it!!

@looseskullsscrafts Год назад

I've found some really cheap and good quality mica powders in The Range if you're UK based. I did a review on those. Otherwise, I'm always searching for some inexpensive pigments. The iridescent one I used in this video is linked in the description from Temu, if interested : ) Very nice and good price.

@NesjeG Год назад

How do you keep the wax on the resin, doet it need a spray or something just to secure the color?

@looseskullsscrafts Год назад

The wax is oil based and these moulds have a 'dull' surface, so they adhered really well without anything. The wax doesn't work so well on shiny/glossy moulds, I've had to sand and prime those to make the wax stay on.