No video :(

DIY LEVELING FEET | cheap & easy

Подписаться 15 тыс.

Просмотров 26 тыс.

50% 1

I'll show you how to make 4 leveling feet for under 20 bucks.
Everybody needs leveling feet in their workshop, don't spend more money than necessary, build it yourself using common goods.
You'll need a m20 threaded rod, 4 m20 washers, 12 m20 nuts and 4 icehockey pucks
you can buy the icehockey pucks here: amzn.to/3JZOnV1
Fusion360 drawing: www.dropbox.co... if you want to support the channel, you can buy me a coffe:
ko-fi.com/chri...
Thank you very much !!!
*affiliate links:
my camera: amzn.to/3Ef7ObP
my lens: amzn.to/3fG1sYY
my mic: amzn.to/3rtPSTi
or you can also support me through paypal:
Paypal Me: paypal.me/cleh...

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@canozcan Год назад

Christoph, this is very helpful video. It may look simple but it is a critical piece of the design and you helped me a lot. I am building the stand for my milling machine and following your videos. Thank you.

@AJCyalater-qv4ei 3 месяца назад

Wow. Wish I could of done this for washer. Awesome idea.

@matus1976 Год назад

I was just about to spend way too much on some leveling mounts for my recumbent motorcycle frame jig and thought - there's gotta be a better way to do this! found your video, excellent idea! Hockey pucks on order from amazon and large diameter threaded rods from bolt depot, less than half the cost of what I was going to get and you couldn't even level it under load! genuis! great video.

@migmagingenieria Год назад

Very cool and useful project, thanks for sharing. Cheers from Alberta - Canada!!!

@JulianMakes 2 года назад

This is genius, im going to use this on my welding table. Thank you so much!

@ChristophLehner 2 года назад

Thank you for the nice comment, Julian !

@JulianMakes 2 года назад

@@ChristophLehner omg i stupidly welded the washer to the nut. dammit! ok i'm ordering more washers.

@ChristophLehner 2 года назад

@@JulianMakes hahah fuck ups happen to all of us

@tinkerjar396 Год назад

Good stuff!

@KevinToppenberg 2 года назад

Just what I needed. Thanks!

@debbydhill 2 года назад

Clever!

@Caderic 6 месяцев назад

Way to big for my application, but the hockey puck is so simple and genius!!!

@BuildItAnyway Год назад

You have a video about everything!

@andre2028 2 года назад

Hallo, gute Idee. Werde ich auch machen. Um die Mutter dauerhaft auf dem Gewinde zu befestigen geht auch gut Fügeverbinder Hochfest, Bsp. von 3M. Gruß Andre

@ChristophLehner 2 года назад

Danke für den Tipp mit dem Fügeverbinder Hochfest. Wie fest wird denn das wirklich?

@andre2028 Год назад

@@ChristophLehner Mit normalen Mitteln und roher Gewalt bekommt man das nicht mehr gelöst ;-)

@alexandrega1335 Год назад

Very Nice

@tomk3732 Год назад

These are very light duty. I tried using hockey puck but net result was exploding rubber. I.e. this is not good for loads over say 1000 lbs.

@marcgionberthoud9394 2 года назад

To what machine weight would you use these leveling feet?

@ChristophLehner 2 года назад

i have it on my mill and on my lathe, the weigh ~500kg. I would say 1 ton is the max i would trust the hockey pucks. Above that i probably would use something made out of metal.