Тёмный

DIY Modern LED Car/Truck Tail Light 2022 | With Knight Rider Scanner & Police Flasher Modes 

HAZI TECH
Подписаться 16 тыс.
Просмотров 26 тыс.
50% 1

#DRL #WS2812 #LEDstrip #Arduino
WHAT'S NEW
1. Multiple patterns are added to the main Tail Light system. The mode can be changed with a push button.
Mode #1 - Park light, brake light, reverse light, dynamic/ sequential turn lights and hazard light.
Mode #2 - Knight Rider Scanner
Mode #3 - VIP Flasher
2. Mode indication LED is added to fix inside the vehicle cabin to see the current mode of the light system.
3. Power OFF mode memory is added.
4. Knight Rider Scanner colour can be changed.
5. Park Light Brightness can be changed.
6. Three code options are given based on the available modes.
ENJOY !
Reach out to us for any personalized services or custom job requests - 📧 info.hazitech@gmail.com
We specialize in creating customized lighting solutions tailored to your vehicle's unique style and preferences. Whether you're looking for a specific size or design, we've got you covered. Our team can provide you with a personalized code for your custom lights or even ship complete controllers pre-programmed with the code of your choice. With over 100 successfully completed projects worldwide and more in progress, you can trust us to deliver exceptional results.
If you find this video enjoyable, I kindly encourage you to express your support by liking and subscribing. Your engagement not only fuels the growth of the channel but also serves as a tremendous motivation for me to create more captivating content. Thank you sincerely for your invaluable support!
/ hazitech
Find more vehicle LED Light Systems here
• Automobile Tech
“Modern_Car_Tail_Light_V4” Arduino Code
Free content no longer available. For code purchase with upgraded controller, contact us at info.hazitech@gmail.com or WhatsApp +94779299171
Parts List
Nano-3.0v-ATmega328-5V-16M-CH340 (Arduino Nano)
www.duino.lk/Mother-Board/Nan...
WS2812B RGB LED Strip Light 144LED pixels/leds/m IP65
www.ebay.com/itm/WS2812B-Stri...
DC-DC 3A Step-Down Power Module 5.5V~27V Output 5V
www.duino.lk/DC-DC-3A-Step-Do...
10K ohm Resistor (6 pieces)
www.banggood.com/200pcs-14W-1...
22K ohm Resistor (5 pieces)
www.banggood.com/20pcs-2W-22K...
Chapters
0:00 - Demo
3:23 - What's new
3:32 - Part list
3:47 - Wiring diagram
3:55 - Code editing & uploading
7:21 - Final testing
DRL,DIY Modern LED Car/Truck Tail Light 2022 | With Knight Rider Scanner & VIP Flasher Modes | Arduino,audi style tail lights,dynamic indicators,modern turn signal lights,bike pixel led strip,creta audi style led tail lights,sequential led turn signals,drl lights for cars,audi style tail lights evo x,Daytime running lights led strip,cycle tail light with indicator,arduino,ws2812b,fastled library,chasing turn signals,tuk tuk light,tuk tuk,daytime running light module,daytime running lights,daytime running led lights for cars,Daytime running led lights

Наука

Опубликовано:

 

23 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 199   
@HAZITECH
@HAZITECH 2 года назад
Find more vehicle LED Light Systems here ru-vid.com/group/PL4dsTE_604gsyR__ym22681pabDq9zSTR
@ASP0519
@ASP0519 2 года назад
Эти проекты я уже смотрел класс👍👍👍
@awnisharma
@awnisharma 2 года назад
you never disappoint mate..
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot bro 🤜🏻
@Mike47160
@Mike47160 2 года назад
Hi finally i handle with this code and have drl signal turns police strobo and knight rider ;-) Thank You Hazi 🍾👋 and now i learned some arduino rules 🤭😁
@HAZITECH
@HAZITECH 2 года назад
Wow I'm so glad to hear that
@MR.D12159
@MR.D12159 2 года назад
oh shit 😳 it's awesome 🌚🌚❤❤.nice work aiye 👌👌
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot malli 😊
@noobiangr2635
@noobiangr2635 2 года назад
thats awesome! ! i ve ordered all the components and i ll try to attach it on my old fiat brava..it should be fun xD
@HAZITECH
@HAZITECH 2 года назад
Awesome. Let me know how it goes.
@vindulaherath6400
@vindulaherath6400 2 года назад
Superb bro!
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot
@sangrajawalisakti2206
@sangrajawalisakti2206 2 года назад
Last Time Your Projects Police Strobo, I Use WS2812B 8Led To 16Led Verry Very Good👍👍👍
@HAZITECH
@HAZITECH 2 года назад
Super. Thanks a lot 👍🏻
@richardparked1405
@richardparked1405 2 года назад
Outstanding love the knight rider 👏
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot 👍🏻
@richardparked1405
@richardparked1405 2 года назад
@@HAZITECH Its actually work and easily to programming for newer like me 💜💜💜💜 u are my hero 🙌 ❤
@HAZITECH
@HAZITECH 2 года назад
Wow thank you so much. Really appreciate your support. Please LIKE and SUBSCRIBE to grow the channel.
@autolightsupport1272
@autolightsupport1272 Год назад
GREAT!!! 👍👍👍👍👍
@HAZITECH
@HAZITECH Год назад
Thanks 😊
@pabasaratech911
@pabasaratech911 2 года назад
Harsha brother , grate job......🎆
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot 😊
@rapturko7
@rapturko7 2 года назад
Very very good 👍👍👍
@HAZITECH
@HAZITECH 2 года назад
Super Thanks
@CHAMPLK
@CHAMPLK 2 года назад
Nice work brother 😍😍😍
@HAZITECH
@HAZITECH 2 года назад
Thanks brother 😀
@Mike47160
@Mike47160 2 года назад
Thank You ;-) You are my Arduino Master !!! Now i think only change color and will be like DRL ? For front lights ... Awesome Job !!! Thanks again .... Best Regards ;-)
@HAZITECH
@HAZITECH 2 года назад
The front light video will be released soon. Stay tuned.
@edled1026
@edled1026 2 года назад
This is a very professiinal video . Tha k you
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot 😊
@roshanbasnayaka8511
@roshanbasnayaka8511 2 года назад
Super bro….
@HAZITECH
@HAZITECH 2 года назад
Thanks bro 🤜🏻
@chitrungpham5804
@chitrungpham5804 2 года назад
It is very nice for additional function, great!!
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot 😊
@chitrungpham5804
@chitrungpham5804 2 года назад
@@HAZITECH can you change WS2812 to RGB 1W LEd? It will be more sight
@HAZITECH
@HAZITECH 2 года назад
1W pixel LEDs? Or regular?
@chitrungpham5804
@chitrungpham5804 2 года назад
@@HAZITECHI mean SMD LED 1W
@HAZITECH
@HAZITECH 2 года назад
You have to use pixel LEDs to make this work
@sumeeranayanajeewa7781
@sumeeranayanajeewa7781 2 года назад
Super, i like it
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot 😊
@freethinker1492
@freethinker1492 2 года назад
You are the best on you tube when it comes to neopixel projects.. I love your work keep it up.. Is there any chance of making the brake light strobe 3 times them stay on? also animate the reverse light so it comes on like the tall light?
@HAZITECH
@HAZITECH 2 года назад
Hey thank you so much. I’m honoured. Yes it is doable. I’ll add it to my next revision soon.
@DrTRonik
@DrTRonik 2 года назад
Nice&Cool!.. 👍
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot
@daviongilbert7887
@daviongilbert7887 Год назад
hello, I discovered your channel a short time ago, and your creations interest me but I don't know LEDs like the WS2812B and I have questions. do you know how many LEDs Arduino is able to drive? can we connect several strips of LEDs in parallel on the same pin of the Arduino ? because in my project I have to drive 480 LEDs but as the colors are repeated, if I can connect several strips of LEDs, the Arduino will just have to drive 240 LEDs. thank you for your work. Good luck👍
@IvanMi95
@IvanMi95 8 месяцев назад
Hey, I love your videos. Can I make this kind of system with RGBW strips (SK6812) or it must be WS2812B? I want RGBW strip because I could make true white for reverse and drl’s.
@nirusl443
@nirusl443 2 года назад
Thank you sir..... 💕💕💕💕💕💕
@HAZITECH
@HAZITECH 2 года назад
You are welcome
@cjwoodturning4832
@cjwoodturning4832 Год назад
Could you use a esp32 and have WiFi / Bluetooth to change the affects and for testing and stuff might be good trying to do something similar
@HAZITECH
@HAZITECH Год назад
Yeah. I’ll try to do that 👍🏻
@xavoelectro8345
@xavoelectro8345 2 года назад
Good morning, your projects are great, there will be a way to give it a start sequence like Chinese strips, turn on from one side to the other and fill the strip by points and then turn on everything, this for thail lights
@HAZITECH
@HAZITECH 2 года назад
I'll try to do that. Thanks!.
@2dognero
@2dognero Год назад
Great stuff once again. I have built these and installed them on the rear. Any news on the front version? Or how can I change them to white for the front and just not connect the bits I don't need.?
@HAZITECH
@HAZITECH Год назад
Thanks a lot. There are few front versions available in my channel. Please check the playlists.
@electronicsideas1361
@electronicsideas1361 2 года назад
Nice
@HAZITECH
@HAZITECH 2 года назад
Thanks 😊
@SithumBinara
@SithumBinara 9 месяцев назад
Waaw 🥺♥️
@HAZITECH
@HAZITECH 9 месяцев назад
Thanks 😊
@radioninety7084
@radioninety7084 2 года назад
Thank sir you doing great job👍please make it with esp8266/wemos d1 mini for next project🙏
@HAZITECH
@HAZITECH 2 года назад
Will try 👍🏻
@2dognero
@2dognero Год назад
Another great project. What do I have to do change to make them white for the front please
@HAZITECH
@HAZITECH Год назад
Hi all the colours are given in CRGB(Red, Green, Blue) format. So change values to CRGB(255,255,255)
@emrekaragoz4470
@emrekaragoz4470 Год назад
Hi brother, thanks. just trying to understand some values, what is Parkdetect, startupspeed, mode, pres? my park lights are always on, so can i bypass park light connection by changing these values?
@HAZITECH
@HAZITECH Год назад
Unfortunately those are not that straight forward. Sorry.
@sangrajawalisakti2206
@sangrajawalisakti2206 2 года назад
Hello Hazi Tech, Wow really once again a great project 👍👍👍 Can U make the new Running KnightRider Strobo Automatic Can Chaged Many Color addition ? 🤔
@HAZITECH
@HAZITECH 2 года назад
Yes it is possible. I’ll add it to the next version soon.
@herejust4cars723
@herejust4cars723 Год назад
This is amazing! How many amps should have the power supply for this project?
@HAZITECH
@HAZITECH Год назад
Since there is very limited time we light up the full strip in white, for 144LEDs 3-4A is more than enough. Try to find a good quality power supply.
@umerkhalid5450
@umerkhalid5450 7 месяцев назад
Hey your tutorial is amazing ❤ I just wanna know. Can we use arduino for addressable tail lights with also using of sequential tail light function in same device (arduino)? . Basically I am looking for the tutorial in which someone explains the sequential function with show mode in tail lights using arduino
@HAZITECH
@HAZITECH 7 месяцев назад
Hi yes. It can be done. Reach out to us at info.hazitech@gmail.com or via WhatsApp at +94779299171 for any personalised services or custom job requests.
@HemantaKumarSahu279
@HemantaKumarSahu279 2 года назад
Sir,Auto rikswa kelia front glash ke uper laganahe ,ek video banao please.
@HAZITECH
@HAZITECH 2 года назад
ज़रूर जल्द ही करूँगा
@EmreOZTURK_ANT1V1RUS78
@EmreOZTURK_ANT1V1RUS78 Год назад
@HAZI TECH Hello. great project. after uploading the codes to my arduino. I'm giving +12 volts on pin 9. sometimes the flash effect and sometimes the red lights are flashing. What can be the problem.
@HAZITECH
@HAZITECH Год назад
Have you checked that all the resistors are good?.
@nguyenhoainam4496
@nguyenhoainam4496 2 года назад
nice project!! but is there a different type of blinking the signal?
@HAZITECH
@HAZITECH 2 года назад
Thanks. Not yet. It will be available in the next version.
@L__Y
@L__Y 2 года назад
Hey Hasitha, this could look cool on RC Cybertruck + diffuser .. maybe in part 3???
@HAZITECH
@HAZITECH 2 года назад
Ha haa. Good point. Let’s see what I can do.
@manikandan-vf4vc
@manikandan-vf4vc 2 года назад
Thank you so much very nice project.how to make auto colour change in knight rider ?
@HAZITECH
@HAZITECH 2 года назад
It is not doable in this code. I’ll add it to my next version.
@herejust4cars723
@herejust4cars723 Год назад
Where do I connect all the car negatives? Amazing tutorial btw!
@HAZITECH
@HAZITECH Год назад
Since you are powering the system with the car power, there is no additional negative required. Just tap the wired to your car back lights and use with this. If you want to buy the new controller, send an email to info.hazitech@gmail.com
@matthiash.454
@matthiash.454 2 года назад
Wau really once again a great project 👍👍👍 Could you possibly make the new KnightRider in addition ? 🤔
@HAZITECH
@HAZITECH 2 года назад
Hey Matze. I’ll add more modes in my next revision.
@matthiash.454
@matthiash.454 2 года назад
@@HAZITECH ok super 👍🏼
@HAZITECH
@HAZITECH 2 года назад
You are welcome
@terenceone6413
@terenceone6413 6 месяцев назад
Hello its possible Turner on. When speaker outsider model 3 tesla active for song close dors. Tanks for you réponse. And where to bye it?😉😇😇
@HAZITECH
@HAZITECH 6 месяцев назад
Hope we already contacted 👌🏻
@newl.k.d6653
@newl.k.d6653 2 года назад
wow
@HAZITECH
@HAZITECH 2 года назад
Thanks 😊
@vichope6408
@vichope6408 Год назад
Hi is the arduino capable to control multiple light such as brake, park, signals or every section needs 1 arduino?
@HAZITECH
@HAZITECH Год назад
It can be done. Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
@harshapcb4734
@harshapcb4734 2 года назад
Super මචං
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot brother
@sanjeewaelectronicmahiyang9617
@sanjeewaelectronicmahiyang9617 2 года назад
වැඩ්ඩෙක් තමයි
@HAZITECH
@HAZITECH 2 года назад
ස්තුතියි සහෝදරයා 🤜🏻
@tonyvarghese75
@tonyvarghese75 2 года назад
Nice superb. Can you please make bus route destination board using ws2812b led
@HAZITECH
@HAZITECH 2 года назад
Thanks a lot. I’ll try. Sorry it is taking too long.
@tonyvarghese75
@tonyvarghese75 2 года назад
@@HAZITECH ok welcome
@HAZITECH
@HAZITECH 2 года назад
👍🏻
@skythetimelord
@skythetimelord 7 месяцев назад
Hey, Hazi do you have a website where i can request custom lights from you if not its cool i appreciate the knowledge and will start on my project
@HAZITECH
@HAZITECH 7 месяцев назад
Hey, my website is still WIP. You can directly contact me via email or WhatsApp. That’s how everyone does. Send me an email to info.hazitech@gmail.com or WhatsApp +94779299171
@thai6670
@thai6670 Год назад
LOVE THIS! any way to make this works with sk6812 rgbw?
@HAZITECH
@HAZITECH Год назад
I’m afraid I have no idea as I haven’t used SK6812.
@thai6670
@thai6670 Год назад
@@HAZITECH not a problem, ill give it a try when i get my nano v3 in!
@HAZITECH
@HAZITECH Год назад
👍🏻
@ASP0519
@ASP0519 2 года назад
Молодец 👍👍👍круто, можете сделать зад и перед дневные ходовые огни на одной ардуино с полицейскими стробоскоп ом но с подключением ленты перед один сигнал зад другой сигнал и кнопка на включение стробоскопа.
@HAZITECH
@HAZITECH 2 года назад
Спасибо!. Постараюсь добавить в следующую версию.
@ASP0519
@ASP0519 2 года назад
@@HAZITECH спасибо, очень буду ждать 👍👍👍 хочу использовать ваш проект в постройки нового электровелосипеда.
@konrade9389
@konrade9389 2 года назад
Helo, can i somehow adopt the code to use it with WS2801 ?
@HAZITECH
@HAZITECH 2 года назад
It will work with a code line change.
@bwo924
@bwo924 Год назад
i must be missing something because i worte out the code exactly as you showed it in the video and i can't get my sketch past the verification because it says so many things are left undefined.
@HAZITECH
@HAZITECH Год назад
Free content no longer available. For code purchase with upgraded controller, contact us at info.hazitech@gmail.com
@RolanJerrier
@RolanJerrier 6 месяцев назад
This will drain the car battery if the car is not being used as the circuits will stay on. Does the code allow for arduino to "sleep"
@HAZITECH
@HAZITECH 6 месяцев назад
Usually the light is powered by the ACC power line. That means power comes to the system with one key click. So no battery drain when vehicle is turned off. And the standby power drain is around 10mA. Which is negligible considering the vehicle battery capacity.
@strose4417
@strose4417 Год назад
how do i keep the knightrider on all the time and only go off when i indicate
@HAZITECH
@HAZITECH Год назад
Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
@minigamergamerguy8358
@minigamergamerguy8358 Год назад
hello kind of new to arduino the voltage devider 10k 22k will make 10 volt signal will that not burn the input bcause hen can is runing its 14.7 something Q_Q help
@HAZITECH
@HAZITECH Год назад
No worries. It is safe even for 15V
@minigamergamerguy8358
@minigamergamerguy8358 Год назад
@@HAZITECH thx u for ur reply ur awesome :D i tested it and it WORK ! ur the best
@HAZITECH
@HAZITECH Год назад
Yeah. Awesome 👏🏻
@kokodestop828
@kokodestop828 Год назад
If you use esp8266, what do you have to change?
@HAZITECH
@HAZITECH Год назад
Yu can use the code as it is.
@rms-repairmainanseremban8403
Bagus ni...minta izin nk cuba boleh?
@HAZITECH
@HAZITECH Год назад
In English please
@isurubandara5317
@isurubandara5317 2 года назад
I NEED PART 3 OF RC TESLA CYBERTRUCK 🙏
@HAZITECH
@HAZITECH 2 года назад
Soon brother.
@freddiejansen307
@freddiejansen307 Год назад
hello a question ... is it posible to have the turn signal also in red collor
@HAZITECH
@HAZITECH Год назад
Yes possible. Just update the CRGB(xxx,xxx,xxx) values to CRGB(255,0,0) in the code
@freddiejansen307
@freddiejansen307 Год назад
Okay very good In the future i want my own buikd taillight and headlight With that audi style welcome light show and after that Drl front and back Also keep the park light function And turnsignal dynamic And when uses turnsig. The drl on that side need to be dimming Also want to build a crazy bright 3e brakelight with in corperated also turnsignal (alternate with the one in taillight both dynamic) And when brakes are not aplied than 5 sections of light turn on ( truck toplight idea) At front want the drl also welcome show light and dimming when use turnsignal All drl's must dim atliest 40% when using turnsignals and when driving lights are turned on So its a lot but i thinks this should be posible with you're equipment
@HAZITECH
@HAZITECH Год назад
Yeah need to think but doable. Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
@Mike47160
@Mike47160 2 года назад
Hi ;-) please add Version with DRL ..Thank You ;-) I try modify this but i have some problems ;-( ...
@HAZITECH
@HAZITECH 2 года назад
Will do that 👍🏻
@Mike47160
@Mike47160 2 года назад
Hello ;-) can you add new project with drl please Best Regards 😁
@HAZITECH
@HAZITECH 2 года назад
Will do soon
@vcooltm8769
@vcooltm8769 2 года назад
create an 8x62 LED matrix project for cars with tex bluetooth+brake signal thank you..
@HAZITECH
@HAZITECH 2 года назад
Actually working on it. Let’s see.
@vcooltm8769
@vcooltm8769 2 года назад
ok tank's
@RGBW-DRL
@RGBW-DRL 2 года назад
I want to make it
@HAZITECH
@HAZITECH 2 года назад
Perfect. Try it. You won’t be disappointed.
@taller683
@taller683 Год назад
Hello congratulations ! Is possible make this projet but using a ATtyni85 programed? From Argentina ! I suscribe now! Bye!
@HAZITECH
@HAZITECH Год назад
This specific program is too large for ATtiny85. You could go to my ATtiny85 playlist and see the available options.
@taller683
@taller683 Год назад
@@HAZITECH Thanks friend. Really excellent projets . Congratulation. Good luck !
@HAZITECH
@HAZITECH Год назад
Thanks a lot 👍🏻
@adriangrabowski7985
@adriangrabowski7985 Год назад
how to connect the arduino in the car so that the indicator lights work when the car is off (hazard lights)
@HAZITECH
@HAZITECH Год назад
Then you have to power the system with direct battery power not ACC.
@adriangrabowski7985
@adriangrabowski7985 Год назад
@@HAZITECH won't the arduino drain the battery with this connection?
@HAZITECH
@HAZITECH Год назад
At standby mode (when there is no LED bulbs lit) it drains a very low current around 20mA which is significantly low for the car battery.
@baranbasaran3468
@baranbasaran3468 Год назад
Can you please send the arduino codes and diagram?
@HAZITECH
@HAZITECH Год назад
Free content no longer available. For code purchase with upgraded controller, contact us at info.hazitech@gmail.com
@samuelfrodge4988
@samuelfrodge4988 2 года назад
Would you or anyone here know how to install this for blinker with just knight rider theme working?
@HAZITECH
@HAZITECH 2 года назад
So basically you want only the knight rider pattern along with the tail light functionality?.
@samuelfrodge4988
@samuelfrodge4988 2 года назад
@@HAZITECH yes and I've tried the arduino site ones nothing works really. But easier to send my lights to have it done
@sanjeewalasantha
@sanjeewalasantha 2 года назад
Led strip ganna koheda thiyenna meha
@HAZITECH
@HAZITECH 2 года назад
Mehe 144LED/m eka nam hoyaganna amarui. 60LED/m nam thiyanawa.
@HAZITECH
@HAZITECH 2 года назад
Online Electronic Stores Sri Lanka tronic.lk digitalelectronics.lk www.menstore.lk duino.lk scionelectronics.com senith.lk wire.lk techshop.lk
@rameshappannaghosaravade909
Bro I got error like led was not declare in this scope. How can I fix this
@HAZITECH
@HAZITECH Год назад
Install FastLED library brother.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--oPCpF1Unk4.html
@rameshappannaghosaravade909
Thank you
@HAZITECH
@HAZITECH Год назад
You are welcome
@eross21
@eross21 10 месяцев назад
what do the resistors do in this circuit?
@HAZITECH
@HAZITECH 10 месяцев назад
Voltage dividing and noice filtering.
@eross21
@eross21 10 месяцев назад
@@HAZITECH cool what does voltage dividing accomplish? just curious i’m trying to learn arduino and circuits
@HAZITECH
@HAZITECH 10 месяцев назад
@eross21 it basically divides the input 12V voltage signals into two parts and feed only ~5V to arduino pins as 5V is the maximum the Arduino input pins can handle. So it is like 12V to 5V voltage converter. And also the resistors make sure that Arduino won’t pickup noice when there are no inputs given by grounding the pins.
@dzulfanabid5308
@dzulfanabid5308 Год назад
Why my LED after power on always stuck in the middle ? Can you help me sir 🙏🥲
@HAZITECH
@HAZITECH Год назад
Please check the 5V power supply. Try a different power supply.
@dzulfanabid5308
@dzulfanabid5308 Год назад
@@HAZITECH thanks You very much sir 😁 Now my LED not stuck again 🙏😁
@bowowardiman638
@bowowardiman638 Год назад
where is code sketch
@HAZITECH
@HAZITECH Год назад
Free content no longer available. For code purchase with upgraded controller, contact us at info.hazitech@gmail.com
@bonez1305
@bonez1305 Год назад
Hello. Nice project , is there location to download the code ?
@HAZITECH
@HAZITECH Год назад
Yeah. As always, full code is linked in the video description (google drive link)
@sikandarfarooq1590
@sikandarfarooq1590 7 месяцев назад
Can you please give it to me @@HAZITECH
@iu6qljomradio171
@iu6qljomradio171 2 года назад
Helo hazi
@HAZITECH
@HAZITECH 2 года назад
Hey Tony
@iu6qljomradio171
@iu6qljomradio171 2 года назад
@@HAZITECH ti chiedo di fare le luci di direzione dinamiche,del video che ti mandai grazie sei bravissimo
@Md_Sohel_Rana
@Md_Sohel_Rana 2 года назад
Can use this bike
@HAZITECH
@HAZITECH 2 года назад
Yes you can
@Md_Sohel_Rana
@Md_Sohel_Rana 2 года назад
Thanks bro
@HAZITECH
@HAZITECH 2 года назад
You are welcome brother
@VDC48
@VDC48 2 года назад
Still waiting new project 👍👍👍😁
@HAZITECH
@HAZITECH 2 года назад
Cool 👍🏻
@jahangirbaba742
@jahangirbaba742 2 года назад
I want this sir
@jahangirbaba742
@jahangirbaba742 2 года назад
Your contact no. Plz
@HAZITECH
@HAZITECH 2 года назад
Hi sorry I’m not selling. You can make it on your own.
@skraj6294
@skraj6294 8 месяцев назад
boss code need
@HAZITECH
@HAZITECH 8 месяцев назад
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
@revansiddhatechnolog
@revansiddhatechnolog Год назад
Please share code
@HAZITECH
@HAZITECH Год назад
You can contact me via info.hazitech@gmail.com to buy the code
@revansiddhatechnolog
@revansiddhatechnolog Год назад
How many rupees?
@changchung
@changchung 2 года назад
My friend I need help with a project. How can we be in contact? Email? Thanks
@HAZITECH
@HAZITECH 2 года назад
You can mention the concern here.
@bowowardiman638
@bowowardiman638 10 месяцев назад
STINGY
@HAZITECH
@HAZITECH 10 месяцев назад
I was giving away all for free over last 3 years. Cannot do that forever.
@peterjackson1295
@peterjackson1295 2 года назад
Hi, can't find the download Modern_Car_Tail_Light.ino can you supply a link for this
@peterjackson1295
@peterjackson1295 2 года назад
Sorry, found it now
@HAZITECH
@HAZITECH 2 года назад
Great 👍🏻
@anilthilakasiri874
@anilthilakasiri874 11 месяцев назад
Meke code eka denna puluwanda
@HAZITECH
@HAZITECH 11 месяцев назад
Code eka purchase karanna puluwan.
Далее
I’m Never Buying LEDs Again! EASY DIY WLED!
13:11
Просмотров 1,2 млн
KITT Destroyed By The Juggernaut! | Knight Rider
9:10
Разбудили Любимой Песней 😂
00:14
RIP Philips Hue & Govee
16:28
Просмотров 690 тыс.
How It's Made Honda Civic FB7 Led Tail Light
13:12
Просмотров 19 млн
DIY Sequential LED Turn signals for any car.
9:11
Просмотров 166 тыс.
How to Install LED Bed Lights (Fun DIY Project)
23:19
Prices & Poco M4 Pro 5G
1:00
Просмотров 267 тыс.