DIY Photo Booth Update! 

Glad to help

Do you plug the printer in a s have it next to the stand?

👍🏾👍🏾

Thanks!

That’s great to hear!

I believe it's a 2 1/2" piece.

I actually have been selling them but not for the 12.9 iPad. I haven’t come across a ring light that can fit it.

Sure, I can make one for you. Send me an email at djlogic26@hotmail.com

Thanks! I used heavy duty Velcro on the iPad case to hold it in place. This allows me to swap out iPads easily. I am using the iPad air, but it can handle any iPad other than the Pro.

@@logisticalstyles thanks!! I started watching your other videos and found my answer lol. Now just trying to find what is a good budget friendly tablet that will work. I know you stated the ipad air 4th gen is what you are using, but are there any other ones you recommend? Thanks again!

The pictures come out good but a dslr is always going to look better. Also it depends on how you adjust the camera settings in whatever app you use. I also use some extra lighting when necessary.

You can set a dslr in the ring light

The app has a lot of features. It allows the guests to email, text,airdrop or print the pictures. It automated the process. While you can do most of that on your own, it would take too much time when you are live at an event and have 20 people waiting in line. Also the app can be set to virtual attendant mode so you can drop off the PhotoBooth and not need a live attendant. It also allows the client to get access to the pictures.

So far I've done it both ways but I think cutting the hole gives a cleaner look. The toilet flanges have these odd parts cut out in addition to the screw holes. These cutouts make it easily recognizable as a toilet flange. When I drill the hole then screw in from the bottom the toilet flange isn't as recognizable. The only time I just screw the flange to the top of the base is when I am using 4 inch pipe instead of 3 inch. The 4inch pipe fits around the flange and you get more support when you mount it on top.

I usually just send them to the clients but I will post some pics from events this week on my website. www.contentunlimitedllc.com

Hi, I sell them for $300. If you are interested you can email me at djlogic26@hotmail.com

I sell them. You can email me at djlogic26@hotmail.com for mor info.

You can use kneeling pads which you can buy at Walmart or any auto parts store for about $15

Hi, com not too far from you. You can email me at djlogic26@hotmail.com for more info. I’m located in South Fulton.

Thanks emailing now. @@logisticalstyles

For the booths I build, anything other than the Pro. The Pro will not fit in this 18" ring light.

Sure, here you go: www.homedepot.com/p/Oatey-3-in-ABS-Pipe-Test-Cap-with-Knockout-39102/100122751?source=shoppingads&locale=en-US&pla&mtc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax&cm_mmc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax-71700000097492030--&gclid=CjwKCAjwzJmlBhBBEiwAEJyLu_Qf-iUfXQ0qDdCzzCvdaXhHWOV_7wSYqWTfUSw9ERhSvGkfyF7A5BoCPGcQAvD_BwE&gclsrc=aw.ds

​@@logisticalstylesThanks man!