DIY Portable Boombox HITS down to 35hz! - Dinas Boombox Build

Подписаться 95 тыс.

Просмотров 20 тыс.

50% 1

#DIYAUDIO #BASS #BOOMBOX
Deep Bass like the Dinas but portable? You know it! The Dinas Speakers made a big splash when Joe N Tell and I designed them. The only problem, You can't take them on the go. Now, that same idea was taken and made portable. It uses the same drivers and is still tuned to 35hz. There's not many portable units that can explore the deep low bass this can. Check out the build.
🛠️ Build Your Own: toidsdiyaudio....
📻Parts Used:
(1) W5-1183SMF: USA: parts-express.... or Europe bit.ly/3RkZhZw
(2) RS100-4: parts-express.... or Europe bit.ly/40d8d7v
(1) 2.1 Amplifier: parts-express.... or amzn.to/31EeLQh
(1) 19V Power Supply: amzn.to/32jQOOh
(1) Power Jack: parts-express....
(1) Aux Input (optional): parts-express....
(1) Power switch (optional): parts-express....
(1) Acrylic Amplifier Faceplate (optional): parts-express....
🔋 Optional Portable Components
(1) 21v Battery board: parts-express....
(2) 18650 Batteries: parts-express....
🏁 Finishing materials used
Epoxy for beautiful finish: amzn.to/2QLG3hr
Spray Glue for Fabric: amzn.to/3gEnZ2Y
Wood Glue: amzn.to/3hyi5BQ
📄Speaker Plans: toidsdiyaudio....
🔥 Where to Buy Speaker Parts and Kits:
US and Canada: parts-express.... get 5% off with code TOID
UK and Abroad: bit.ly/3skOGRJ
Worldwide: Amazon: amzn.to/3aPhKYD
Car Speakers/ Home Audio and electronics: howl.me/cg5oP9...
🏠Get Whole House Audio:
Arylic: bit.ly/2wFUUQ4
🍿Theater Seating
Valencia Theater Seating: bit.ly/3Jbagjm
🎙️Sound Advice Podcast: anchor.fm/soun...
🎧Buy Audiophile Headphones: howl.me/cg6GDj...
🆓Get it with Prime - Free for your first 30 days: amzn.to/326cZqe
FREE Audio Books for 30 days from Audible: amzn.to/3a7lBS9
📄Speaker Plans: toidsdiyaudio....
👋Connect with Me:
www.toidsdiyau...
🤝 Support:
Patreon: / 123toid
Disclosure: This channel is viewer-supported. When you buy through links on my site, I may earn an affiliate commission. I only recommend products I would use myself and all opinions expressed here are my own.

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@robbiedh02 3 года назад

Yet another great build, I got the chance to listen to these when I visited and the sound is amazing, loud, clear and has plenty of depth.

@HifiVega 4 года назад

I dig! My wife loved the stained wood pieces. She’s starting to get into wood working herself

@Toid 4 года назад

Excellent! Not an expert by any means, but I'd always be willing to share what I know. Feel free to hit me up anytime.

@PelleTampio 4 года назад

I have been working on a similar concept for few year when i got my self a peerless 830946 6.5. Decided to pair with two dayton PS95-8's. The reflex would be insane below 50hz tuning in a small box so i managed to settle on two passives 8" in a 11L box tuned to 40hz. Mono amp for the woofer and daytons with stereo. With DSP i can cut things below 30hz and stop the woofer from meltdown and push the max db on the whole woofer range at max amp out put to 102-105db. The band pass fot the woofer would not have worked with 25-200hz. Interesting to see how it measures vs simulations.

@bigdan2828ify 3 года назад

Awesome job again, love the videos... BTW, im the guy that got you to make me custom voxel plans, turned out great and am currently making a 2nd! Thank you so much for everything and will look forward to more projects

@Toid 3 года назад

Thanks man, I love hearing that. I'm so glad you're enjoying them.

@HEARDIFFERENT 4 года назад

Loved the Dinas. SO naturaly LOVE THOSE TOO!!! 👏👏👏

@BusyDadsWorkshop 4 года назад

Yet another reason for me to want a Shapoko!! Nice work!

@Toid 4 года назад

Just being honest with you, I don't really like my Shapeoko. I think you'd be better off not getting a belt drive machine. Just my personal opinion.

@deathsickle 4 года назад

Man, I was dreaming about doing something just like this a year ago! So stoked to watch you build it!!! Are you happy with it? I wanted to do something portable, but the power demands I calculated with a woofer just needed too many batteries and I thought it would weigh too much... great video, great build, love it!

@Toid 4 года назад

That's awesome! Glad you like it. I have this one too my mother for her Birthday. But I was very happy with the sound being a portable unit.

@zaprojects 4 года назад

So cool & high quality build 😍👍

@technicaldhruv3304 4 года назад

Ur videos are just amazing..they have helped me alot..😁 👍🏼👍🏼👍🏼

@Toid 4 года назад

I love hearing that! Thank you for sharing that with me!

@technicaldhruv3304 4 года назад

@@Toid Actually I'm from India and the speakers which cost usually 10 dollars cost 30 to 40 dollars in India and gets pretty expensive...but the way u explain stuff about crossovers and other stuff helped me alot to produce good sound from cheaper speakers...love from INDIA🇮🇳🇮🇳🇮🇳

@endall39 4 года назад

Nice project! Much more portable than my DINAS boombox, which has the double subs. I just had to have all that bass!!!

@Toid 4 года назад

I heard somewhere, it's all about that bass!

@karthikeyay2988 4 года назад

That idea of epoxy is great 👍👍👌

@hagengocht3891 4 года назад

Word! Couldn’t see your face but I know 100% guaranteed that you had a mask on if there was any MDF dust flying around... lol Nice Job!!!!!!

@brunobuehler Год назад

Nice Built! I have seen some similar builts but with a ported design. What would be advantages and disatvanteges of that? As far as i understand you would have even more and lower bass with a port.

@webliveby 7 месяцев назад

передняя панель от бабушкиного шкафа. нужно было так заморачиваться😁

@BlueOceanDesigns 4 года назад

Nice project I also like what you did with the front and the semi rebate..Cool :)

@Toid 4 года назад

Thanks man! I appreciate hearing that. Honestly, it was the backup plan. The original was using 1/2" sock that stuck out 1/4" from the front with a chamfer on it. But I am glad I went this route instead.

@leif8436 4 года назад

yo toid the legend back at it again! nice work

@Toid 4 года назад

Haha, thanks! I'm glad you liked it!

@didierleclerc66 4 года назад

Was not sure about the front panel finish when I saw you lay down the epoxy but the end result is super stylish.

@Toid 4 года назад

Thanks! I will say, you really want it to cure (up to a week) before you clamp it. Otherwise, the clamping pressure will affect the finish.

@Lesterandsons 4 года назад

Love the tools

@2wilbster 4 года назад

Okay, this is just cool!

@itichuboardgames4863 4 года назад

Finally a sound test!

@Divyesh_Sinha Год назад

I have a doubt The subwoofer is 40w But those full ranges are 30w each total 60w At lower volume won't those full ranges play louder than the sub hence low bass and higher mids and treble?

@goobisoft4873 4 года назад

Lucky u have this driver available in ur area

@Toid 4 года назад

Which driver?

@goobisoft4873 4 года назад

@@Toid tangband

@Toid 4 года назад

@@goobisoft4873 interesting. I thought pretty much everyone could get Tang Band.

@goobisoft4873 4 года назад

@@Toid i can but its hard to get plus double price what u pay there

@Toid 4 года назад

@@goobisoft4873 oh wow. That's high

@kengrimme420 6 месяцев назад

I'm building Toid's DINAS BOOMBOX and see that his design has roughly half of the space recommended volume for the full-range drivers. Would you recommend increasing the enclosure volume for these speakers to the recommended 0.04 Cubic Feet?

@besterspieler2285 4 года назад

goddamn this video making should have quite some more views

@Toid 4 года назад

Feel free to share it

@pliedtka 4 года назад

Meow, CNC machine 👍

@kengrimme420 7 месяцев назад

How does the audio quality compare to Paul Carmody's Isetta?

@joentell 4 года назад

I like the gloss finish

@Toid 4 года назад

Thanks Joe! It was the first time I did it on an entire baffle. I really liked how it came out as well. Might have to do it in a bigger scale sometime.

@Kooldown349 2 года назад

Does the size of the chambers for the full range speakers matter? Im planning on making something similar, that can hit down to 32 hz, but the chambers will be as big as you made them, and I'm wondering if that will make them sound bad? Im going to use a dsp with a crossover freq of 500 hz, so they will do the mid's and high's, and the sub will do the lows. Ill also use some isolation for the full range chambers. How big were yours, and is there anything you could would change about yours?

@annreid1965 4 года назад

You’re router bit is blunt ! HELLO

@zemont 2 года назад

Hey Toid, one question, since you're using a 200w amplifier, why are you using just a 90w power supply? wont it bottleneck the amp? i used one of those with a 144w PS and it wasn't enough

@tstanley01 3 года назад

Could you put a set of flush mount tweeters similar to the ones in the bookshelf version, or are they unnecessary?

@robinovering3928 3 года назад

What type of connectors did you use to connect the wires to the drivers?

@dtwistrewind7361 4 года назад

Gorgeous finish on the front baffle, what kind of resin was that you used?

@Toid 4 года назад

Thank you. For future reference I link those things in the description of the video. But to make things easier for you, here you go amzn.to/2QLG3hr

@Kcducttaper1 4 года назад

I'd considered building a bookshelf with these drivers, but feel weird leaving out a tweeter. I know the RS is a full-range and the frequency response looks very good. Do you find it lacks any of the 'shimmer' a nice tweeter would normally provide?

@Toid 4 года назад

I think the Rs100 does a fine job nearfield. It will jsut start beaming sooner being a full-range of that size. A tweeter definitely adds to the experience, but I think the RS100, is adequate by itself.

@killernils 2 года назад

How Loud does it get?

@rosadoco 3 года назад

What is the overall size of this?

@flotterblotter 3 года назад

How u make this possible . On tang band is this woofer down to 45hz??

@Toid 3 года назад

You are just looking at the raw specifications, which aren't that useful. You really need to learn how's to simulate drivers based on their t/s specs and then how to properly measure the response with a calibrated microphone. Once you do this, you can see easily how this subwoofer can do this. It's really a beast for such a small woofer. One of the best for pure low frequency for it's size.

@klewandowski5666 3 года назад

whats the max spl?

@davidwittmann6555 4 года назад

Do I need to build a crossover for this?

@Toid 4 года назад

The plans do include an optional notch filter. But that is optional. If you decided against that, then, no.

@therealemmpunkt 3 года назад

Are the plans metric or imperial, mm or inch?

@Toid 3 года назад

imperial

@kevinh9333 4 года назад

Would it be possible to design this with 2 tang band w5's or is that overkill?

@Toid 4 года назад

it would be overkill. The problem is you wouldn't really be gaining much. The box would be double the size. On top of that when you add a second sub, you wouldn't be gaining much. The subwoofer would have to be running series making it an 8 ohm load, which would half your application. So now your two subs are getting half the power of your first sub.

@kevinh9333 4 года назад

Thanks for the reply, that makes sense. Just ordered the plans 🤙

@Toid 4 года назад

@@kevinh9333 you're welcome. If you have any questions along the way, just ask. I'll be happy to help.

@tmaxymiv 4 года назад

When u will show new klipsch clones?

@Toid 4 года назад

Either next week or the week after

@Vincent-lw2sp 4 года назад

Can they be made without a CnC?

@Toid 4 года назад

Absolutely. You can easily do this without a CNC. In fact the plans, assume you don't have a CNC.

@stevemendez4741 4 года назад

music track name?

@ML_314 3 года назад

Why don't you let us hear the Audio directly from the sound test / box? The alignment of the full range RS100's on the front plane is acoustically very poor. It causes massive interferences and therefore a very uneven sound in the horizontal axis - the axis humans typically act in the most. Sadly such YT-build most of the times concentrate on a nice enclosure and finish, not on the "speaker" part itself.

@Toid 3 года назад

The audio at the end is the audio directly from the final project. I just took multiple video angles.

@ivanaleksandrov5521 Год назад

Бабущкин шифонер

@besterspieler2285 4 года назад

i mean just in case anyone wants to build this, you should give a notice that this box wont exactly be loud at all. 82/db W/m is pretty damn weak if then also driven with a small class d chip

@Toid 4 года назад

I'm not sure why you think it's 82 decibels sensitivity. That's just incorrect. Full-range drivers are about 90 decibels sensitive. maybe you don't realize that it's set up to a 2.1 amplifier with the subwoofer receiving twice the amount of power as the full range drivers. It's plenty loud enough for a Boombox. In room, It could easily go over 100db.

@besterspieler2285 4 года назад

@@Toid im talkin subwoofer

@besterspieler2285 4 года назад

@@Toid sorry for not declaring

@Toid 4 года назад

@@besterspieler2285 I got you. But with the subwoofer receiving double the amplification, it'll still go over 100 decibels.

@besterspieler2285 4 года назад

@@Toid yeah that'll result in premium battery life...

@foxador020 3 года назад

Damn those tools. This ain't a DIY video hehe

@godtot2847 4 года назад

good) а вот одна из моих колонок) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PHCf5dIPo3k.html

@JeffKoper 3 года назад

I just don't think this should be labeled DIY with thousands of dollars of equipment being used to cut out the pieces and create this box. To me DIY is a table saw, palm sander, jig saw, cordless screwdriver :)

@Toid 3 года назад

You wouldn't even need all that to do this. I just use the CNC since I have it 😁 but you could easily do this with just a jig saw and drill. I'd still prefer to use at least a table saw as well.