DIY Portable TV Stand

Подписаться 982 тыс.

Просмотров 149 тыс.

50% 1

In this video we're making a portable, height adjustable TV stand. You can download the plans and cut list for this from my website at lrn2diy.com/wp-content/uploads....
VIVO Fully Articulating TV Wall Mount: geni.us/0quORnh
3/8" x 8" Bolts: www.homedepot.com/p/Everbilt-3...
3/8" Washers: www.homedepot.com/p/Everbilt-3...
3/8" Wing Nuts: www.homedepot.com/p/Crown-Bolt...
Casters: geni.us/wIbJ
Ready for your two free audiobooks from Audible? Just follow this link: www.amazon.com/Audible-Free-T...

Хобби

Опубликовано:

20 авг 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 138

@Tixbomber 4 года назад

Built this project today. Modified it a tad for a higher rise. Came out perfect. FYI for the folks looking for plans. Just pause the video in the beginning. The plans are right next to the CAD drawing. You need (4)- 2x4x8. Cheap 2" casters. 3" screws. And (2)- 3/8" bolts @ 8" length. (2)- 3/8" wingnuts, and some washers. You don't need a TV mount either. You can just make one with wood.

@timc7798 4 года назад

did you build it for outdoor use? What type of wood did you use? just pine or treated?

@Tixbomber 4 года назад

@@timc7798 Indoor use. Standard pine lumber urethaned. For outdoor use, treated and deck sealer.

@ravenBXNY 5 лет назад

Awesome instruction for this project. I built one in a few hours. Thank you for sharing.

@garrettchumley995 7 месяцев назад

Excellent design and very easy to follow instructions . I used that as the backbone then built a cabinet around it for my covered patio.

@spatifiji6219 6 лет назад

Legend! So helpful by putting all the information out there for viewers to make their own DIY project! :) Double thumbs up! Hoping to view more such videos and tutorials from you ! Best wishes

@taradog22 6 лет назад

thanks... great video... Just hung a TV on wall in garage, but decided I wanted to make it mobile to move out to backyard patio ( second 7ft garage door on back of garage so easy to roll out to patio once I build something like this) ... was thinking of adding a plywood bottom to the base and then pouring in some concrete for added weight to help avoid tipping. but again thanks for the video - I was torn on deciding what height, and then saw your video with the adjustable height.

@sally86don 7 лет назад

Awesome way to build it! Thanks for the video

@moonwatcher9014 5 лет назад

what a cool idea at last i wasnt the only one who thought of this. I really liked your video.

@isipwater 7 лет назад

Excellent video but I have one question. Can the TV be turned from landscape to portrait orientation with your design? The reason I ask is that I want to store this in a closet that would only be large enough if the screen could be adjusted to portrait orientation. Thank you.

@HeinsSkitzvelvet 6 лет назад

I made it! Holds my 55" no problem. Thanks for the blueprint! I really appreciate it!

@richardsolis805 5 лет назад

can you build me wone

@richardsolis805 5 лет назад

call me 361 444 44580

@brandonhart4168 4 года назад

Hi can you please email me the plans as I can't find them anymore. thabeardedbrothaa@gmail.com

@ryanbeavers1155 4 года назад

Hey Michael... it looks like he doesn’t have the plans anymore. Would you be willing to share yours?

@ostaz007 3 года назад

What a great build!!

@ooveinteractive1875 5 лет назад

Excellent thank you! I will try soon because i need one. Just one question, i suppose measure are in pouces, right ?

@IAMLEGEND451 7 лет назад

Good job! from KL

@raylesire2101 3 года назад

I wanted to thank you for this project. I am a teacher here on a little island called aruba and at the moment we are doing 90% of classes at home. And this stand helps me so i can make a make shift studio for recording classes for my studio. The prices for metal stands like these on the island go around $225 🙈. This one cost me about $40 to make. I am definitely subscribing to your channel awaiting to see more great and practical ideas👍😊

@LRN2DIY 3 года назад

I'm so happy to hear your story, Ray! That's awesome that you were able to save some money building yours. Wishing you all the best with your at-home classes and your recording.

@EM-cz4rd 2 года назад

Aruba! Home of Xander! And your neighboring island Curacao home of my current neighbor in Los Angeles, Kenley Jansen. Love the vibe from players from those two islands. Incredibly nice people. In fact, Kenley's number for the Dodgers is 74. 74 is the street address of his childhood home in Curacao. Legend!

@TheEightTrac 4 года назад

This is awesome!!! Could you reupload the blueprints? It appears that they are no longer available.

@mydiy8501 7 лет назад

Awsome stuff! You deserve more veiws!

@jonbaker476 Год назад

This is such an amazing idea thank you

@jwarren1223 4 года назад

Can't seem to find the plans on your site. Still have them?

@dblankenship6947 4 года назад

The Link to the Cut list isn't on your website any more can i get a copy of it?

@septimuspretorius250 6 лет назад

Excellent!!!!

@michaelsavage4422 3 года назад

Looking for link for tv mount. Was hoping to find one that also spins 90 degrees Or even 360 Degrees. I want to use it as an artist Easel.

@alfonsor4985 7 лет назад

Nice video!

@viluvaboy 4 года назад

Nice! How large of a tv can it hold?

@unpoliticallyuncorrect6135 4 года назад

Just did it best thing ever happened to my small bedroom

@guygamespc 5 лет назад

Fantastic good idea

@amitsonwane1287 Месяц назад

I loved this

@taeshaunhodge-maroney2770 4 месяца назад

I wanna make something similar to this and paint it black for a 2x2 mobile tv cart thanks for the video!!

@christophertcraig 4 года назад

Looks like a great project but the link to your site errors out... Can you update your link?

@tatchison87 7 лет назад

Oh snap check it out, you made another video. I was just browsing around and came across a couple videos of yours that I liked and decided to subscribe just a week or so ago, just to get disappointed when I went to your channel and saw you hadn't made a video in months. I even thought about unsubscribing and bam, you make a new one. Keep up the great videos. Very informative and usually fairly easy stuff once you break it down.

@mahdialthurwi2279 2 года назад

Awesome 👏

@ACommenterOnYouTube 4 года назад

I built one similiar to this ... not quite as nice but it got the job done, the wife tells me that im a $ cheap $ ass ... friends and relatives were quite impressed and said i did an awesome job ...

@bigshwayze 4 года назад

What if I have a curved 65 inch tv?

@stevejohnson5033 3 года назад

Great Video! How much weight do you think it could support? I am thinking of using this for a 65" tv about 50 pounds. I do not want to drill holes into the concrete wall.

@LRN2DIY 3 года назад

I'm confident that the stand could hold 50 lbs so you just need to make sure the mount you choose can support that as well. One like this, for example (amzn.to/310yjh2) could handle a whole lot more.

@zykeriasimon2824 7 лет назад

Do you make this for other people

@timc7798 4 года назад

Found the cutlist: start with - (4) 2"x4"x8' 1st 2x4 - cut to 36", 24", 24", 3 1/2" 2nd 2x4 - cut to 36", 32", 20", 3 1/2" 3rd 2x4 - cut to 32", 32", 20" 8" 4th 2x4 - cut to 20", 7 1/2", 7 1/2"

@LRN2DIY 4 года назад

Thanks for this! Took me forever to find the file (I thought it was gone forever) but I found it and uploaded it here: lrn2diy.com/wp-content/uploads/2020/06/portable_tv_stand_cut_list2.pdf

@liemqnguyen 7 лет назад

Nils, its been a while since you post another great video. Did you finish your basement ? I got my basement framing completed. I rand all the electrical outlets wiring , just need to do some cat5 and some lightings then I am done so I can start drywalls.

@LRN2DIY 7 лет назад

Hey Liem, yeah it's been too long. Basement's all done and came out great but I've had several videos take priority over the basement videos, but I'll get to them. Awesome that you're done framing and wiring! Keep up the good work and keep in touch!

@MJMCHRONICLES 3 года назад

Nice job thank you

@KekseTheFox 6 лет назад

Whitch do u prefer for heavey work impact drill there not very common to see for sale or force driver

@LRN2DIY 6 лет назад

I love my impact drill for anything heavier duty. It works great and is lighter to carry as well.

@jeremeymcdonough4348 4 года назад

Maybe I am dumb, but I can not find the plans for the adjustable TV stand

@pablovergarafernandez2352 Год назад

Donde encuentro la plantilla con las medidas?

@judalion13 6 лет назад

You mentioned that you Used a 7/16" Drill bit. Do you think the 3/8" screw will fit with 3/8" drill bit or will that be counter productive? I am just thinking cost wise and the structure of the Stand because I intend on adding Mounts for two of my game systems. So the more snug fit the better?

@LRN2DIY 6 лет назад

The bigger the better there. The idea is that the bolts have plenty of room to slide through the holes and aren't getting caught in the holes. Any way that you can arrange for them to slide easily is ok. Does that make sense?

@judalion13 6 лет назад

Makes Total sense! Thank you for getting back so quickly!

@SJones-gb8sr 3 года назад

I am needing a tv stand similar to this that can be seen over peoples heads at a trade show, what would i need to change to in the measurements to make the wood long enough for that? Thank you!!

@LRN2DIY 3 года назад

The only change you should need to make is to make either the lower 3 2x4s on the neck or the upper 2 2x4s on the neck taller. You could make them all longer if you want more adjustability and you might consider making the feet longer if you need better balance at the increased height but it may not be necessary.

@SJones-gb8sr 3 года назад

Thank you so much!

@gt2scale 7 лет назад

What size is the TV you used here? What sort of weight do you think the stand could support?

@LRN2DIY 7 лет назад

I'm pretty sure this is either a 39" or 42". It supports it really well but does start to get tipsy if I put the TV way off to the side, which the TV mount allows. Weight-wise, I think it can handle quite a bit - maybe even 100lbs or more so long as you're not trying to move the TV too far away from that top arm. The size of the base and TV mount are the two biggest factors.

@gt2scale 7 лет назад

Great. Thanks for the reply. I recently upgraded to a 4K TV for our living room, and now there is a 60" (the old TV) that is collecting dust, begging to be a shop TV.

@malekal-halabi5374 7 лет назад

DIY Nils what camera do you use because the quality is AMAZING!

@LRN2DIY 7 лет назад

Thanks, George. I started shooting on a Canon 70D sometime last year and used a Canon 7D before that. The main factor in the image is the glass though - I use a Sigma DC 30mm F/1.4 lens and I love it. The low light capabilities are fantastic (because of the 1.4 aperture). Thanks for watching!

@MrAbemoga 3 года назад

Up to what size will it hold?

@familygameroom4729 Год назад

Curious if it would hold my 65 inch vizio

@bartrevels549 4 года назад

Looking for the plans/ cut list. Want to make a stand for outside deck. Thanks for posting your projects.

@richshoaf3573 4 года назад

Same here, the link provided results in a page not found for the cutout pdf file.

@deadly4sure 4 года назад

Can you re-upload the plans they are missing

@pgsibilo 3 года назад

COOOOL 👍👍👍

@KorkutSA 10 месяцев назад

Awesome

@jamesbondaygee Год назад

The mounting bracket is supposed to be part of the DIY

@djayceemobileentertainment 5 лет назад

Suggest locking wheels

@moonwatcher9014 5 лет назад

Ijust subscribed.

@josephpopovich7400 2 года назад

What is the size of tv can that hold.

@TheCentralflorida 3 года назад

Never trust a man who uses Elmer's wood glue! I kid I kid....great plans. My building is great; my engineering? Not so much. This helped.

@veerasekar 7 месяцев назад

Could it be compatible with 75 inch tv

@crystalgolden481 3 года назад

WhT is the biggest TV this will hold?

@ninjadojonobi7923 3 года назад

Looks Crate!! I mean great!

@jerseybricks6426 4 года назад

I would buy that how much for 1 of those

@Rjames112 2 года назад

How stable is it?

@miksim35 5 лет назад

I have an old plasma tv that is pretty heavy. Will it hold it?

@miksim35 5 лет назад

It’s a 42 inch zenith

@LRN2DIY 5 лет назад

Depends on the mount you use with it. The hydraulic kind typically isn't designed to hold those heavier TVs but there are many mounts that could easily hold it. The stand isn't the limiting factor as much as the mount.

@Moose1999 4 года назад

The link is broken

@seanloggins9752 Год назад

Any chance we can get the pdf uploaded again, trying to knock this out within the next couple days

@LRN2DIY Год назад

I just clicked on the link in the description and it worked just fine. What link are you trying?

@clovischua9810 3 года назад

Can someone tell me how many bolts, washers, Wings nuts are there

@LRN2DIY 3 года назад

At 4:45, it shows it - you just need two bolts, two washers and two wing nuts.

@timc7798 4 года назад

Could you please reupload the plans for this? I cant seem to find the cut list anywhere. If anyone here knows where to find or has the list could you post it

@LRN2DIY 4 года назад

Finally found the plans again! lrn2diy.com/wp-content/uploads/2020/06/portable_tv_stand_cut_list2.pdf

@pharohbender 7 лет назад

All you have to do is be a carpenter with all the tools and we can start building a tv Stand ..... ill use slotted angle a spanner and a hacksaw.... LET's DO THIS!!

@EM-cz4rd 2 года назад

I wouldn't paint it to "make it look more presentable".... I want people to KNOW I made that bad boy LOL!!! Nice, I'm not much into carpentry or whatever but this looks easy enough.

@armansaim267 5 лет назад

very impressvie

@kristenkrumheuer 4 года назад

Do you have to use the jointer?

@LRN2DIY 4 года назад

Definitely not required, no. It just saved me a bit of sanding. Technically you may not even need to sand if the boards are in great shape to start with. The goal is a good fit and easy sliding.

@nephiilim 4 года назад

I feel like getting the after market mount negates the whole thing. I was looking forward to this orogect being entirely diy minus the wood, screws, and glue.

@conniehale4378 Год назад

What size tv does this accommodate?

@LRN2DIY Год назад

That mostly depends on the TV mount you choose and the weight of the TV. This particular setup could probably hold up to about 80 lbs safely.

@lajadda 11 месяцев назад

👍👍👍👍

@SgtTheile327 3 года назад

I'm looking for the cut list, the link takes me to a blank page

@LRN2DIY 3 года назад

I just checked and the link is working fine - maybe try on a different browser? I’m on my iPad at the moment and it showed up right away.

@conniecuozzi Год назад

The cut list link goes to a blank page, any way you can send it

@KantonineN Год назад

Link to cutlist isn't working

@deadly4sure 4 года назад

Can we get the plans for this?

@LRN2DIY 4 года назад

Finally found the plans! lrn2diy.com/wp-content/uploads/2020/06/portable_tv_stand_cut_list2.pdf

@bellespellen9445 5 лет назад

what wood is that

@LRN2DIY 5 лет назад

Just pine. Standard 2x4s.

@the5singers 2 года назад

Cut list won't load

@lechevarria121 4 года назад

Anybody have the plans available??

@LRN2DIY 4 года назад

The plans are in the description.

@tamaratamrot2681 4 года назад

I bought plans from stodoys and I made it very fast.

@lechevarria121 4 года назад

Can you share the plans?

@veganpowerguy 5 лет назад

Links are brocken

@LRN2DIY 5 лет назад

Thanks for the heads up. Should be working now. It appears that Fleximounts no longer sells the exact same mount they sold when I made this so I found one nearly identical and linked to it.

@rarozzo 2 года назад

do you still use it?

@LRN2DIY 2 года назад

After almost five years of use, I just sold it. I found that I wanted to have smaller monitors closer to where I was filming so I wasn't using this one as much. It still worked great though!