DIY Spray Paint Flames 

Thanks!

haha... if it works, it works...

👍Thanks for watching!

Thanks for watching👍

Thanks for watching👍

Hi what spray you use?

Robert, it’s just normal spray paint aerosol cans that you can buy at the home improvement store. Nothing special. Thanks for watching sir!

I bet you can handle it sir! Have fun!

Looking forward to seeing your twist on it! Cool projects you have on your channel!

@@Project2Workshop nice of you to say, thank you very much. Lots of flame painting on here but your thumbnail stood out and I’m glad it did because it gave me some inspiration.

Thanks!

@@Project2Workshop very welcome!!

Well any progress on the harley tank? Let's see it brother!

Thanks!

Thanks!

Omg sames

Lime line tape

Thanks! Everyone needs a mom reminder every now and then👍

Sounds cool to me!

@@Project2Workshop What type of tape did you use to mask the flames? Try to be a specific as possible, there are many choices and I want to get something that works. Thanks.

@@WizardofGOP I used what I had on hand but it was 1/4 3m yellow vinyl amzn.to/3bTOLFE and regular blue painters masking tape amzn.to/3lqt432

@@Project2Workshop Thanks for the quick reply. Got the base black high heat paint on with a couple of coats. Just too windy and it hasn't let up for days so I just went for it. The tape will be here on Friday, have the engine enamel (hope it's good enough heat wise) in yellow and red for the flames. Thanks for the tips and the inspiration.

@@WizardofGOP you bet bud, I bet it’ll be sweet!

So true!

And how long before removing the tape. Thanks

Albert, I don’t remember exactly but you don’t want to let the paint dry much at all before removing the tape. You’ll notice me being very careful to only touch the area that the tape is covering while removing the masking. To get the “chemical bond between the color coats and the clear you want to apply clear before full cure of those coats so let it rest about 10-15 minutes and you’ll be good for clear. Start light and add thin coats! Good luck and thanks for watching👍

Thank you so much, appreciate the prompt response

Sorry, forgot to ask, if you wet sanded and buffed the tank to get such great shine. Thanks again

No sir, that’s just how the clear laid out without sanding or buffing👍

Would have been a cool detail! Maybe next time👍

Just normal spray paint, I don’t remember exactly what brand it was. I don’t know that it matters much, it should be possible with whatever kind is available in your area👍