DJI Digital FPV Goggles V1 vs V2 Antenna Upgrades - What You Need To Know

Подписаться 55 тыс.

Просмотров 58 тыс.

50% 1

Order Secretlab Titan or Omega Gaming Chair bit.ly/2WTEO3F
DJI Store click.dji.com/ABr6BLjmd_1Xb9G...
Order the Cube Autopilot and Accessories at - www.3dxr.co.uk
Support us on Patreon and join my discord server - / madrc
=============================
Mads Weekly Live Stream
=============================
I live stream weekly at 5PM Eastern/ 10PM UK on Sundays on my dedicated Mads Live channel - / @madslivetechtipstutor...
=============================
Patreon Supporters Discord Server
=============================
Patreon supporters of my channel get exclusive access to my Discord Server, there I post info, behind the scenes content as well as help and support on the things i discuss on the channel, for more info check out
/ madrc
=============================
Support The Channel
=============================
I would also ask if you find my content helpful please consider supporting the channel via membership on Patreon or there are links here that we may receive a little commission on.
You can also support me via paypal donation to buy me a coffee or donate to help purchase more products and equipment to talk about.
Support Us On Patreon & Join My Discord Server - / madrc
Paypal Donate - mad_rc@icloud.com
Order Secretlab Titan or Omega Gaming Chair - bit.ly/2WTEO3F
Order DJI Digital FPV System - click.dji.com/ALwcdoCMalut8lJ...
============================
Channel Supporters & Sponsors
============================
The following companies are supporters of the channel and we would not be able to make content without them.
www.3dxr.co.uk - The Cube & Drone Related Products
www.telonic.co.uk - Electronics Test Equipment
cubepilot.org - Cubepilot Autopilot & Accessories
=============================
Review & Business Enquiries:
=============================
Review Enquiries - If you would like to work with us on product or service you have please email mad_rc@icloud.com
Business Enquiries & Consulting - We have huge amount of experience in emerging technology and unmanned systems, we offer both in-house technical services and consultancy, if you would like to discuss how I can help you please email awuas@icloud.com
=============================
Follow Me On Social Media
=============================
Twitter: @madrc1
Instagram: ian_mads_tech
Facebook: / themadrc1
=============================
Music Used
=============================
All music licence by Bensounds
www.bensound.com/royalty-free-...
=============================
Equipment I Use To Make My Content
=============================
Rode Wireless Go - amzn.to/2ZG09zg
Panasonic GH5 - amzn.to/2ZLyFYK
Panasonic G9 - amzn.to/2XLnPzJ
Elgato HD60S & Pro - amzn.to/2B5upt1
Stream Deck - amzn.to/2XudHLm
SL60W Studio Light - amzn.to/3elpT7X
DJI Ronin SC Gimbal - click.dji.com/AJaqzZsqwJcBo2Z...
#Pixhawk
#Ardupilt
#Drones
#

Наука

Опубликовано:

17 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 183

@johnk8825 3 года назад

I'm not currently interested in getting DJI goggles and watched this because it popped up with the notifications. I was thoroughly entertained by this video, it was quite interesting and very informative, you did an excellent job of making the antenna and functionality differences very clear. Thank you.

@beefybeef1326 3 года назад

As always... clear, concise and packed full pf useful information

@solo8820 3 года назад

Thank you so much. New DJI FPV drone is finally here in my hands. I’m always looking to upgrade the antennas but for now. I’m going to wait for V2 patches/omnis. You just saved me from making a bad purchase.

@AlfieDoug 3 года назад

Thanks for the update. Disappointing that Smart controller still needed by V1 for video out.

@nenaddinic 3 года назад

Vision 1 vs Vision 2 :D cheers mate, great review.

@zero1zero184 2 года назад

Excellent video. For those of us who are only interested in using the air units on 5.8G. Will the True rc X-Air 5.8G MkII antennas that plug into both ports on each side, still work well on the V2 goggles? As I have just recieved V2 goggles ( retailer being less than honest ) instead of the V1's they had listed. I bought the two X-Air antennas for the V1's and now have a potential issue. Also has the new firmware been released for the V2's as I don't want to brick my expensive new toy! go DJI.. Thanks for your input.

@fpvraver 2 года назад

Would you recommend a patch and 2 Omni for 5.8 ghz or just stick with the version 1 stock antennas? Also if you recommend the patch in the Omni what’s your recommendation ?

@jmace11ab 3 года назад

If I have V2s and 2 x-air patches what would an idea setup be? I currently have one on each side (uses all 4 ports). But am trying to wrap my head around what is optimal. I know I should consider buying some omnis for variety of antenna. Would there be any benefit to running them diagonally so that one patch covers both RX and one patch covers both TX? If I am understanding correctly as I have it setup currently each patch covers a rx and a tx. Does it even make a difference if I move these around considering the antennas I am using are identical?

@vizjion6259 2 года назад

Great info, very thorough 👍👍👍

@robertparenton7470 5 месяцев назад

Excellent presentation. Thank You! From Frisco, TX

@FLYANDI 3 года назад

U helped me lot lately .. subscribed.

@davincifpv3983 2 года назад

Nice!! Can we use the goggle in the simulators?

@GBMark90 9 месяцев назад

What are the physical differences between the 2? I want the v2 but I can get hold of any new in the uk and want to buy used but don’t want to get conned?

@alepetra 2 года назад

I have dji goggles v2 and fly dji fpv and also other fpv like iflight with caddx vista. Should I buy iflight pacht antenna for using with iflight fpv to get better video signal and then swicht antennas for dji fpv? Thanks in advance

@fpvraver 2 года назад

If I have the V2 goggles and I was looking to get better antenna reception should I use the V2 antennas or the V1 antennas ? I only use 5.8 GHz I fly freestyle. GepRC Mark 4 HD Vista nebula pro.

@JoshuaBardwell 3 года назад

A small correction to the table: the v2 goggle does not do 810p orn144 Hz with the air unit or vista, only with the new Flash drone.

@MadRC 3 года назад

This comes form part of the mess of the launch. The original media page for the V2 on DJI stated that the Live stream was now going to be 810P and it showed this as being the case for the Air units as well FPV. However now that’s all gone and is not shown anywhere. I do believe also it’s not going to happen in the future however I left it there as that’s what they said originally. Even the current Dji Store spec says 810P for live view but does not make it clear what they mean. Frankly the whole launch was a mess and listening to your comments you got the same thing as I did with basically hay you can talk about this tomorrow then is was all don’t talk about it. In the end I choose to leave it in as they appear to say is was going to happen but I will add a sticky post to explain better as that’s warranted. Appreciate the feedback.

@charlesmarseille123 3 года назад

@@MadRC You guys are our references for infos on fpv subjects. Might aswell keep it down to the TL;DR so the guys/gals that listen at only your video get the best idea of products. Appreciate all your work so much, thats why I bother commenting constructive criticism.

@charlesmarseille123 3 года назад

also, the usb out is just for the dji fpv drone. So... v1>v2?

@MattShonan 3 года назад

"Flash" ;)

@eddieremington370 2 года назад

i know Im randomly asking but does anyone know a tool to log back into an instagram account? I somehow lost the password. I would appreciate any tips you can offer me!

@ZangaoFPV 3 года назад

Very nice information. I am hoping to get a V1 for cheaper if people upgrade to the V2, that piece of info makes it even better hahahah

@repaid1317 3 года назад

Good content, thanks Ian

@b.a.d.psychofpv1274 2 года назад

How I see the v1 has better reciever system for long range with air units? Would be not be better to púť the patches on both rx on v2 to get better range?

@dronejunkiefpv9556 3 года назад

Thanks for sharing mate

@ShermanKenB Год назад

So with the V2 goggles, if I'm using say crossfire for my control link, then does that mean you effectively only have the two RX antenae working and the other two are not used?

@verdi6092 2 года назад

Hi, if i only have vistas, is the v1 better than the v2? Im planning to get dji goggles

@elyselapalme7040 3 года назад

Are you saying the v2 will have a better or worse signal?

@pepermintpilot1694 11 месяцев назад

Thanks mate. Funny thing is I was going to ask you this very thing! I bought the V2 (I already have the V1) and thought to fit the Crystal patch antennas (I already have these on my V1). Don't know now if thats such a good plan! Take care.

@RandoManFPV Год назад

Do these patch antennas work on 2.4/have a 2.4ghz option for purchase yet?

@victorcarneiro7256 7 месяцев назад

hi , quick question , for max range on dji air unit v1 with googles v1 , do you think 25mb/s and low latency got more range than 50mb/s low latency ?

@DronoTron 3 года назад

Super useful info, thanx for sharing!

@MadRC 3 года назад

Glad it was helpful!

@gcdevicegc6103 Год назад

So, in case we use elrs we wouldn't mind about antenna even with the new Air unit 03? We can use direct atch antenna 5ghz ?! In this case it doesn't use 2.4ghz anyway right?

@DNLKRNWN 2 года назад

So for longrange with v1 goggles, the patch antennas both best on top right? Because the patch can get re transmition if they have low or bad interference.. why ppl still said patch best on bottom? For freestyle yes patch on bottom and omnies on top.

@AntonEvdakov 3 года назад

could you answer how right to use patch antennas for goggles v2? how to position it correctly

@sharathkumarsampangi5332 3 года назад

Hey mate, Could you add the v1 & v2 model numbers? I don't know which one I own now.

@rubenvaneupen7327 2 года назад

On an analog setup one would typically go for a directional and omni antenna combo on the rx only mounts. Same for DJI goggles v2? And then for tx mounts also directional and one omni I guess?

@MrSabram07 2 года назад

Is there a way to confirm the output wattage of an air unit or a Vista unit? I mean if it says 1200 mw on my OSD does that guarantee that's what it is? Sometimes I feel like 1200 mw is not much better than the 25 milliwatts and I'd like to confirm that my hack is working. Please help me

@sw.dronuje Год назад

please update the topic what settings will be the best at a distance, and what settings will be the best for rooms, it is about signal penetration

@pooljunki1 3 года назад

Nice info mad

@skygroover6692 2 года назад

I'm new to hd, is there anyway I can connect my goggles (dji v1) to a monitor or tv

@lukasz.c3d146 Год назад

Is that mean , If I buy crystal HD path and I going to fly with my dji fpv drone , that antennas will not work ?

@33narim 3 года назад

very nice work. thx a lot.

@AerialWaviator 3 года назад

The antenna configuration details were very useful. New to DJI, having just received my v2 order today (and was wondering if/what patch to get. Will hold off for now.)

@YooperFPV 3 года назад

Except that now its patches on the bottom omni on top. His info seems to be debunked unless @Mad's Tech going to pull off a test like this? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Cj3dHH92Yio.html&t

@DeanF 3 года назад

Thanks for all the great in depth videos! IOrdered mine two days back-Love my first edition, but have issues linking my Dji controller to Caddx Air lite unit with many boards. Any thoughts?

@DeanF 3 года назад

LOL! 😂 Like anyone would notice the difference!

@metoo3918 3 года назад

What is being transmitted by the goggles to a Vista?

@BuddsSkyCam 3 года назад

How do you get it to display on a smart phone?

@PowderMill 2 года назад

Thank you RF God!

@krisgleave Год назад

Hi Ian, I think I’ve asked this before on steam and you said it would be interesting to test. I’ve just got my iflight crystal HD patch and fitted to my V2. I’ll be flying the DJI Avata mainly however also have the Nazgul Evoque and Cinelog25 that I will fly too. How will this patch work with the Avata? I don’t fancy switching the faceplate everytime I want to fly. I have the iflight patch and 2 stubbies they supply. But heard about they’re not 2.4? Does this mean I can’t use these at all with the Avata and controller 2 / motion controller? Or do I use the two patch but put 2 of the stock DJI antenna on the top for example instead of stubbies to resolve? Or so I literally have to switch faceplates? I know I can’t be the only one thinking this so if you know the answer brill. Unless of course it’s a good video idea for you too? Either way would love your help thanks.

@chrisnrs354 Год назад

any update? im in the same boat brother

@krisgleave Год назад

@@chrisnrs354 I think using the crystal patch with the Avata you’ll get worse range but don’t know how much. I’d love to know. I’ve just been unscrewing the antenna but leaving the patch actually on the goggles and screwing on the old ones but defeats the object. I guess it’s just trying but I’ve only used once as not been out with my drone yet

@Rcschim 3 года назад

Hi Ian, question to V2 goggles: is the new antenna config if we use the V2 goggles in V1 mode? Or does this maybe only apply to V2 mode with Occusync3 mode? That's all so complex - makes testing antennas hard. maybe you've seen my V1 tests - there I found that the bottom left port is the most impactful (the RX only) for good range. I understood that TX (for control commands) doesnt need to be a patch since only a few bits of control info have to be sent... If this is correct I should see the best range with 5.8 directional antennas on the RX only ports (bottom left, top right) and the other 2 can be omnis. Or (my fav): using 4 directional 3turn helicals :) Will do some testing with V1 vs V2(in V1 mode) regards to static testsetup video range. curious what I'll find ;) greets, Mario

@charlesmarseille123 3 года назад

@RCSchim, one quick way to determine this would be to grounded-faraday cage each antenna one after the other and range test. This will allow to determine which antenna really does what and which config is the best.

@MadRC 3 года назад

The patches on the RX ports seems to be the best overall. As you say the onmi will be fine for the Tx for the most part as that’s got the power behind it. Having as much gain as you can on receive side seems to always be the best outcome.

@findler 3 года назад

@@MadRC doesn't that also mean that facing the right direction is way more important now?

@kerrycorcoran4885 3 года назад

For clarity, I am planning to purchase v2 for use only of the FPV system. I should be good to purchase the iFlight patch antenna, correct?

@MadRC 3 года назад

100% no issues.

@luckymefpv 2 года назад

Hello, I’m a little confused. I have a set of the v2 goggles with truerc stubbies and the iflight crystal patch. Can you please tell me the intended patch and Omni locations if I only fly with the air units and vistas. Thank you

@MadRC 2 года назад

Opni on top, patches on bottom with the V2

@ChristopherF_1971 2 года назад

@@MadRC thought that was best for V1's. Thata been my findings in testing. I also have both sets

@ferdinandoantinoro 2 года назад

Very informative, thanks. I would to ask if the V2 maintain the fixed tx-rx (not diversity) behavior also when rebooted in air-unit-mode (not DRONE mode). Do you suggest to use V1 antennas on V2 goggles when fly in air-unit mode ? Many thanks.

@ChristopherF_1971 2 года назад

NO! Only use OEM antennas on V2'S. I've been testing this for months now. I have both V1 and V2 goggles and prefer the V1's. V2 was designed around DJI's fpv drone and the AirUnits was an afterthought really. V2'S work GREAT with the Dji FPV drone though because hell that's what the V2 was really designed for. V1'S actually have switching which imo is best for AirUnits and Vistas

@ferdinandoantinoro 2 года назад

@@ChristopherF_1971 Thanks for answer. I’ve thinked to use the V1 antennas on V2 because when used in air-unit-mode seems goggles use only 5.8 bands, so why don’t use 5.8Ghz antennas ?

@ChristopherF_1971 2 года назад

@@ferdinandoantinoro you would think that's way it works. I had poor performance when using anything but stock V2 antennas on my V2 goggles so I just left them after trying all different options of antennas on the V2'S by using different antenna ports swooping top left to bottom right and so on but never had good results.

@erlandfpv 2 года назад

@@ChristopherF_1971 hi there, you're probably wrong how to handle and use the 5.8ghz antenna to V2 googles im using air unit and vista, and running well 6.5km aways without any issue ^€^ better learn more. Thanks.

@ChristopherF_1971 2 года назад

@@erlandfpv I run iflight Crystal on my V2 set now on bottom ports and seems to help a little but very directional

@robi5722 2 года назад

Hi, nice video but if you should specify if you refer to left and right looking at the video or at the real left and right of the goggles. As you did is confusing because you are speaking as if you were in a mirror switching left with right but the image showed has opposite written words. Check it.... so which are exactly the antennaes rx and tx? The ones showed or the ones you speak of. There's a lot of confusion out there about this DJI antennas.

@MadRC 2 года назад

Do the images not make it clear ?

@robi5722 2 года назад

@@MadRC yes the images are clear, but for example at the end when you speak summarising without the images one might fall in confusion... by myself I think about left and right wearing the goggles and not looking at them. So you confirm that the images are the correct reference? You might add a notice to let the video become perfect.

@scottsassafraz1980 3 года назад

Are we risking any damage to our V2 goggles by using 5.8 only antennas? Or is it OK? I've been coming across mixed messages. Thanks

@MadRC 3 года назад

No chance of damage if your staying in FPV Mode and 5ghz. If you were to go to 2.4ghz then SWR would be crazy however again o don’t think there is much chance of damage. DJI protect these things very well.

@IgnoranceParanoia 3 года назад

I've always had my patches on the bottom 2... so that means either: patches on rx/tx & rx or omnis on rx/tx & rx/tx???

@HirschJunge 3 года назад

Same, Joshua Bardwell tested it and it is better.

@ChristopherF_1971 2 года назад

@@HirschJunge I do as well run patches on bottom two ports on my V1'S. On my V2'S I haven't found any good antenna placement and just kept the OEM' antennas on the V2

@sheapyfpv8224 3 года назад

What is best placement for iflight patch attennas and the stubbys? Patch on top and stubbys on the bottom best combination?

@MadRC 3 года назад

Top left and bottom right on The v2 from the front.

@sheapyfpv8224 3 года назад

@@MadRC thanks that's great and then opposite corners for the stubbys?

@findler 3 года назад

@@MadRC PATCHES on top left and bottom right, right? :)

@welldyhans05 3 года назад

if i. usee the iflight crystall hd is it still useable for the dji drone?

@MadRC 3 года назад

Yes and no , if you force the drone to single band 5ghz yes otherwise no.

@welldyhans05 3 года назад

@@MadRC one more question, i mostly fly for long range, is it still have a good range for the the dji fpv drone if i only use single band 5.8 ghz ? or maybe i just need to wait a new dji antenna patch release? thanks for answering my question, youre video very helpfull

@verdi6092 2 года назад

Hi, if i only fly vistas should i get the v1 or v2 since v1s are true 5.8s?

@MadRC 2 года назад

It’s a choice of either. If you can get cheaper V1 go for it.

@j.c.matteson7449 3 года назад

So at this point is there any benefit of you're using Caddx Vista units to buying the V2 instead of buying a good deal on a solid, used V1?

@aymen3962 2 года назад

Solid V1

@deeph46 Год назад

Are there any advantages using all stubbys to all connectors?

@MadRC Год назад

Your better with two patches and two omni overall.

@Life_a_bike 3 года назад

What about audience mode? Can I use a V1 in audience mode with a V2 as pilot goggles? Or the other way around?

@MadRC 3 года назад

Yep absolutely.

@sheapyfpv8224 3 года назад

Would the iflight crystal attennas be good to use on V2 version?

@josefdahari 3 года назад

That's what I'm curious since I just got the v2 with crystals and don't know where to connect them

@sheapyfpv8224 3 года назад

@@josefdahari how are your iflight crystal attennas working on your V2?

@josefdahari 3 года назад

@@sheapyfpv8224 so far so good I haven't gotten any issues so far at all. Not even slight pixelation yet either. But I'm waiting for more reviews on the antenna placements to know if they are fine on top or if I should put them on bottom. I'll try to run all Stubbies and see

@skarebsuper 3 года назад

how do you change between setup 1 and setup 2 for the version 1 FPV goggles?

@MadRC 3 года назад

You can’t. It’s done automatically based on signal.

@skarebsuper 3 года назад

@@MadRC cool. I didn't know. Thanks!

@phocusrs 3 года назад

Thanks for the review, but I don't understand how they managed with their own antennas. If your assumption is correct, how can the antennas can be tuned for 5.8 and 2.4 at the same time?

@MadRC 3 года назад

it will be a dual tuned element but will be interesting to see

@phocusrs 3 года назад

@@MadRC having a linear antenna tuned for 2.4 and 5.8 you'll loose nearly 3dbi. So it will work but I hope that dji addresses this degradation with something. Otherwise the reception will be worst than the V1 goggles.

@AGodwin 3 года назад

@@phocusrs Maybe we can just use v1 tuned antennas and it just wont work in 2.4ghz mode?

@disco.volante 3 года назад

Ok, so when using with the FPV system is there less functionality with the V2 or does diversity just work differently?

@MadRC 3 года назад

Just diferenty, it’s preset combination rather than switching.

@doom3crazy 3 года назад

@@MadRC in theory the v2 should have a more balanced transmission, right ?

@AGodwin 3 года назад

@@MadRC Im still unclear on this. Does the v2 use 4 antennas at once now, or is there still 3 active and its turning any of the 4 on and off?

@jopro_fpv 3 года назад

@@AGodwin its all 4 at once

@ChristopherF_1971 2 года назад

@@doom3crazy not necessarily

@MrLootshoot 3 года назад

Ian i'm running my patches on the bottom and getting better results that way?

@spaceportseven 3 года назад

me too, on v1 goggles. getting upto 1.5km even on 25mw , if it works dont fix it lol

@outlawfpv3792 3 года назад

I'm getting poor reception with my crystalhd patches on the bottom stubbies on top....tried 700/1000/1200mw.....haven't tried them on top yet but I will.

@MUNKYFPV 3 года назад

Me too but I haven’t actually tried running both the crystal patches on top, I tested a single patch in different locations and it seemed to work best on the RX only spot so I put the crystals on the bottom when I got them.

@outlawfpv3792 3 года назад

@@MUNKYFPV most that I have seen are mounted on the bottom.

@BBSlats 3 года назад

@@outlawfpv3792 Is that the same with the V2

@hamadmusabeh 3 года назад

thx for the info , i just got the V2 its on a new firmware (V01.00.0604) but has an empty change log i didn't find any information on how to get video out from the goggles to a smart phone can you share how to do that , thx

@MadRC 3 года назад

That is a future feature that’s not been released yet. It’s not confirmed when.

@MadRC 3 года назад

The update fixes an issue with some minor adjustment on the display. Nothing major as well.

@jackrlanois 3 года назад

@@MadRC Any idea if the update prevents the usage of the 1200mW hack?

@MadRC 3 года назад

@@jackrlanois no I believe it still works.

@MUNKYFPV 3 года назад

Interesting, some of the best information I’ve seen in these goggles. I have the iflight crystal patch on the V1 goggles both connected to the bottom so I have a patch on the RX only and when I tested using a single patch antenna that’s where it seemed to give me the most range. I haven’t been able to find clear info on how the receivers in the goggles are working. So you are saying the V1 goggles are always using antennas 2 and 3 and then choose a third antenna switching between 0 amd 1? So confusing but they work great.

@SirCrashaLot 3 года назад

running the same config. performs great but I have not pushed the range yet.

@ChristopherF_1971 2 года назад

I've made 6 Miles in open countryside with single triple feed antenna 9dbi on bottom right port. I also run my Iflight Crystal patches on both bottom ports and get decent results. My V2 though, I've found adding anything but what they came with makes reception worse. So I just keep OEM antennas on my V2 for spectators to watch my flights. I actually prefer the V1 goggles if you are not buying the DJI Fpv drone you are better off with the V1'S

@marcnh33 2 года назад

I like to know how to connect my Crystal patch antenna on my DJI FPV Goggle V2. On the V1 the patch antenna is connected to topleft and topright SMA connectors wich are both TX/RX On the V2 Goggles on the topleft is TX and topright is RX Where to connect my patchantenna? on the TOP so 1 is for TX and 1 for RX ? Or crosswise to connect both patch antennas to RX or maybe TX ??? I am not sure where to connect, on this moment i have connect on TOP so 1 antenna for RX and 1 antenna for TX. I have tested it yesterday but i doubt if this is the right configuration. I hope you can help me with this TNX Best Regards, Marc

@MadRC 2 года назад

On the V2 best is on both bottom ports overall.

@marcnh33 2 года назад

@@MadRC Tnx i will try, on another ytvideo a guy had tested it and he was getting the best result with both patch antennas connected to tx, sound a bit strange but i will try both options, tnx for your reply! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RpLFvyOKPho.html

@Danscraigslist65 3 года назад

What the heck is a E-Unit? New Dji FPV arrives tomorrow if my V2s work on some sort of cheap flyer I am interested, is that what a e unit is? Thanks

@mort7987 3 года назад

It's Air Unit (the dji brand camera) it's just his accent

@kurtzFPV 3 года назад

Will the v2 work with DJI camera drones?

@MadRC 3 года назад

sadly no

@kurtzFPV 3 года назад

@@MadRCThanks. I have a V2 on order and was hoping but not expecting it.

@brandonwoodford579 3 года назад

Does the 1200mw hack still work on the v2?

@bakkiepleur_FPV 3 года назад

Yes

@TobiasFeuerbach 3 года назад

Where do i put my best Antenna? On the RX Ports?

@MadRC 3 года назад

The overall consensus is yes on the RX ports but it’s going to depend on your flight style and location.

@YooperFPV 3 года назад

Antenna orientation I still get better range with patches on bottom and omni on top on my V2... this makes since since the goggles no longer diversity switch it just uses all the antennas and it will just use the longest range ones it can as long as your facing the quad. If you put the patches on both the TX antennas yes the quad gets your signal but you don't get the video feed as good, or you could just put patches on all of them.

@MadRC 3 года назад

remember everything is subjective compared to your situation , overall for most patches on the bottom behaves best but it wont be for all use cases. having patches on the bottom means you have the best of both worlds, one receive and one transmit, the same then stands for the omni

@bneil4059 3 года назад

Will new dji FPV drone be compatible with V1 goggles?

@MadRC 3 года назад

No as it’s dual band.

@dondupuis5524 2 года назад

So where do you connect the patch on V2 for 5 gh

@MadRC 2 года назад

Use bottom on both.

@dondupuis5524 2 года назад

Thank you, great video, I was a little confused, in the pictures on your slides you referred to antennas left and right as they were facing us, when you show the actual goggles with you sitting behind, you did the opposite. You Hope that makes sense Thanks for such a quick reply. Looking at lots of RU-vid videos on the DJI googles, you are the only one that explain the change in v1and v2 antenna differences.

@xjet 3 года назад

How can I show my face at the field with only old V1 goggles? OMG... if I don't have the latest and greatest I will be so embarrassed! But on a brighter note... I'm going to try a home-built helical on the bottom right antenna port of my DJIs and see how much improvement I get. Stay tuned for that.

@twinturbostang 3 года назад

Just put a "V2" sticker on them. :-)

@armani007E55 3 года назад

@@twinturbostang Exactly E-Bay has them. :)

@ChristopherF_1971 2 года назад

I have both V1 and V2.and I prefer my V1'S over the V2 as I feel they perform better at handling RX signal. Like you I run a 3 turn or 7turn heli on bottom right and I've gotten insane range. Also I will use my Iflight Crystal patches both connected to bottom ports on the V1'S and get decent results. Now my v2's I haven't yet found a good solution. I've tried multiple antenna placements on the V2'S and I haven't gotten very much if any difference than stock, actually they seem to perform worse when I'm NOT using the OEM antennas on the V2'S. I just let others that want to watch me fly wear the V2 set because imo The V1's out perform the V2'S when using with AirUnits or Vistas.

@whiteyguitar666 2 года назад

I would have thought Bruce to be clever enough to build his own HD goggled lol

@MarshTh 3 года назад

Has anyone come up with a good answer on how to set up V2’s with iflight crystal patch and stubbys?

@MadRC 3 года назад

I’d go standard and see how it behaves.

@MarshTh 3 года назад

@@MadRC ... meaning stock antennas ??

@MarshTh 3 года назад

Or iflight Crystal patch on bottom stubbys on top ?

@DarrenAllatt 3 года назад

Probably bottom.

@doom3crazy 3 года назад

Are you saying v2 will have slightly better transmission?

@ChristopherF_1971 2 года назад

V2 imo doesn't work as well as V1 with AirUnits and Vistas. V2 will work fine with AU and Vista but the V2 was more designed around the new FPV drone and its rx/tx.

@doom3crazy 2 года назад

@@ChristopherF_1971 that’s all hearsay. And also false. There’s been plenty of videos comparing v2 and v1. When using after market antennas they function the exact same with the exact same range. When using stock antennas the v2 have slightly less performance because they’re dual band antennas(5.8 and 2.4) vs the v1 that was just 5.8. Hope that clears things up for you.

@ChristopherF_1971 2 года назад

@@doom3crazy I understand your argument but certainly disagree. I own both V1 and V2 goggles and see first hand the V1'S perform better. Especially with patch antennas. Sorry to disagree..

@doom3crazy 2 года назад

@@ChristopherF_1971 I also own both the v1 and v2. Are you sure your v2's arent broken? How do you have your antennas oriented? The transmission system is slightly different so you have to place your antennas differently but I promise you, they're identical. I've taken them out pretty far with the same antennas and they are exactly the same. The v1 might have "diversity" but the v2 not having diversity wouldnt change the behavior that much. You just instead have 2 antennas constantly receiving and 2 antennas transmitting. I've watched a number of videos and I don't see that theres any real world difference. Do you have a specific example I could try and recreate cause when I fly them side by side(with friends) everyone says the same thing. " I cant tell a difference"

@ChristopherF_1971 2 года назад

@@doom3crazy just curious, On your V2 goggles where are you installing the patch antennas and where are you installing the omni antennas. Without me saying how I installed mine.

@kamgal94pl39 3 года назад

Not compatible with Caddx Vista?

@MadRC 3 года назад

V2 and V1 are compatible with both air units.

@DazzieBeire 3 года назад

Direct from DJI.... All four antenna are rx top two are rx and tx on V2 and currently the app to watch using USB-C is not available. They told me I would still need smart controller.

@jopro_fpv 3 года назад

wait what did they say about the antennas?

@danfallbacher5507 3 года назад

So much for video out if you are running the air unit or vista; it doesn't work. Only works with the DJI FPV drone!

@josefdahari 3 года назад

So I'm still confused. On where I should connect my iflight crystals to the top of bottom ports or mixed up. On the v2s

@MadRC 3 года назад

I would try it on the top two and see how performance is. If not good try the bottom left looking at the front. The problem is we don’t know what’s going to be better at this stage due to we don’t know much much the V1 switched between modes. It’s going to be a game of trail and error.

@Mike-fm3km 3 года назад

HEY BUDDY! WHY DONT YOU make an updated video now that the dji fpv drone is out... if someone has both systems the dji fpv drone and the dji unit whats the best middle ground antennas that works with both.. becouse the stock ones kind of suck with the air unit

@ChristopherF_1971 2 года назад

My NEW V2 goggles keep rebooting!! My V1’s have been solid but as of now I’m not flying my V2’s until I get a fix.

@MadRC 2 года назад

Try downgrading in FPV mode to the list firmware via assistant 2.

@ChristopherF_1971 2 года назад

@@MadRC I’m a little confused. I’m currently on 0606 firmware for diy drones . I don’t own the Dji fpv drone. So I’m currently on and stay on DIY mode. So what’s downgrading going to do? When I plus the V2 goggles into DJI assistant2 it says current. So may need a little more information than what you mentioned. Thank you though

@ChristopherF_1971 2 года назад

I just had another blackout to Dji logo about an hour ago. I’m pretty pissed at this point because these have destroyed 2 $400 DIY quad now.

@Chio_OB 3 года назад

Brilliant, if only you could actually buy them...

@cristianperez1120 3 года назад

So yeah i had the same problem but i downloaded the dji app on my phone and every day i checked 2 times a day and then when they restocked a month later i was ready to buy one but they run out fast

@medhanieyemaneghebre 2 года назад

I just spent two hours researching these goggles (novice to drones). I saw many videos where they talked a lot but said very little. Your video is excellent. Everything I wanted to now in one short video. Thank you very much!!!

@RandoManFPV Год назад

Well said. I've watched hours of drone videos now and still don't know all the terms and parts or what they do. I still don't know what all these different numbers and stuff means or nothing but I've listened to so much talking. It's like all the drone channels are already so deep they just expect everyone to understand their terminology but new guys like me are just confused lol