DJI Goggles 2 + Caddx Vista - MSP DisplayPort on Betaflight 4.4!

Подписаться 1,4 тыс.

Просмотров 23 тыс.

50% 1

Betaflight 4.4 has been released and setting up MSP DisplayPort (canvas mode) on Caddx Vista using the DJI Goggles 2 is a little different from before. Here's a walkthrough of my experience to get it working. Hope it helps someone out there!
Here's the command I had to enter into CLI to get it to work eventually:
set osd_displayport_device = MSP
save
Previous video on how to set up MSP DisplayPort on Betaflight 4.3:
• DJI Goggles 2 + Vista ...
What is a SwitchBlock? Here's the video of me showcasing the O3 SwitchBlock which allows modular mounting of the O3 Air Unit (camera and antenna too) on multiple quads:
• nxp200 O3 SwitchBlock ...
Pololu JST SH1.0 connector suitable for Caddx Vista:
core-electronics.com.au/break...

Опубликовано:

25 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@DanielAx 6 дней назад

Thanks so much for the CLI tip. I couldn't get the OSD to show up as well and didn't know about the command.

@kskmain 8 месяцев назад

Damn, you saved me today. I never used Vista before and I've been tinkering with this issue for the last two hours. Thank you.

@GVNSTAGATOR 8 месяцев назад

this definitely saved me today. ive been bashing my head for the last few days. appreciated!

@denisherasymenko6708 11 месяцев назад

Hello. I'm new, this is my first pair of glasses. I couldn't turn on OSD for half a year until I watched this video. Unbelievable. I already took a picture even to sell the hell out of these glasses. Thank You.

@bee.a.drone.studio 2 месяца назад

Dude YOU my god of drones! You is only one guy who solve my problem with OSD! Thank you very much!

@KK-ol5ov Год назад

Great video! The last part is crucial 👍

@samavella8831 Год назад

Thank you for the update and great video. Interested in seeing how you installed the JST Connector to the CADDX. That’s a brilliant idea. Cheers 🍻

@nxp200 Год назад

Sam Avella, done! Video was just released on how I installed the JST plug onto the Vista. I also attributed the video to your comment. Hope that's ok. 👍

@KK-ol5ov 7 месяцев назад

I really ought to remember these steps by now but still coming back to this video each time I get a new drone 🙏

@nxp200 7 месяцев назад

Trust me.. I go back to my own videos too 😂

@KK-ol5ov 7 месяцев назад

Just so helpful as it’s not a task we perform often 😅

@nxp200 7 месяцев назад

I haven't checked yet, but I believe there's a preset made just for this to make it easier. I'll do an update video when I get time.

@Piyanyai 4 месяца назад

Thank you so much for making this tutorial.😍😍😍

@SummerCrowfpv 6 месяцев назад

Awesome ❤ Thank you you just saved me the cost of 2 more o3 air units Great video Love the little breakout board too gotta get some of those 👍👍

@nxp200 6 месяцев назад

Glad the video helped! I have a video specifically for that extra board I added to the Vista ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4qIszB0ouxg.html

@Aether-Entropy Год назад

Thank you so much! I was looking forever for this!

@FPVowl Год назад

Nice one, really nice video👌🏻

@FpvDrone360 2 месяца назад

congrats!!! still working!

@FPVowl Год назад

Got my sub! Very nice channel

@PsychonautFPV 3 месяца назад

Thanks dude!🎉

@sergeygrishin2794 Год назад

Thank you so much!

@HenryFPV-qg8km 7 месяцев назад

Thank you so much for making this tutorial. 😊🙏🤝

@nxp200 7 месяцев назад

Glad it was helpful!

@HenryFPV-qg8km 7 месяцев назад

@@nxp200 i have a question, hope that u answer. Can we set Canvas height and width OSD when we use Caddx vista like Dji 03 air unit?

@dugy40 Год назад

My dji goggles v2 are also already in fcc mode. Allowing me to change from 25mbps to 50mbps. The display is twice as clear. Love it. Next going to add 1000 and 1200mw. 700 is the highest.

@peterkortvel Год назад

Thank you!

@Glospecial92 10 месяцев назад

Thanks a lot Man, same problem, u are Angel ❤.

@MarkPurmal 9 месяцев назад

Thanks

@dronefilmsgermany 3 месяца назад

Great work. Did you solder any pads to the fc from vista or it’s a direct plug and play?

@nxp200 3 месяца назад

This depends on the flight controller. Some of them have plug and play connectors for the Caddx Vista and some require direct solder. In my case, I direct soldered to the flight controller the VBAT, GND, RX and TX wires.

@Kbay99 4 месяца назад

Hi NXP! Fantastic video, really helped me a lot. I have one question though… after following this process everything worked perfect with the osd but when I went to fly today it was stuck in limp/low power mode. I assume this is something to do with the msp settings?? Have you encountered this before? Thanks!!

@nxp200 4 месяца назад

Hmm.. haven't had this happen before. Maybe you can try turning "Settings -> Control -> Auto Low-Power State of Air Unit" to "OFF"? That's how I fly, because if I crash and have to disarm, resulting in low power mode kicking in, I can't see the video to attempt turtle mode or locate where the quad ended up so I can search for it (as fast as I can before it overheats!). If that mode works, but you still want to have that option enabled, there might be some issue with the air unit not receiving the "arm" command from the flight controller. To which I'm not actually sure how to diagnose, sorry. If I get a chance anytime soon, I'll try to test it out on my system and let you know.

@zac_vaughn Год назад

Wow that's a cool frame you have! What is that? I've never seen it before.

@nxp200 Год назад

The carbon frame is an ImpulseRC Micro Apex 3 inch. The black whoop guards is my own design. I'll add the 3D STL to the video description soon for you to download if you wish.

@samavella8831 Год назад

Hi, Sorry to bother you again. I forgot to ask you what fonts you used for your OSD? I’ve just setup my iFlight A65 that has a Caddx Vista with the Goggles 2 and the Fonts appear much larger than yours. Thanks.

@nxp200 Год назад

No need to be sorry. Happy to try and help. The font is default after flashing Betaflight. In Betaflight Configurator OSD page, the front drop-down shows "font default" on mine.

@MY69534 16 дней назад

hello, nxp200, may i ask a question, i saw the osd on the right bottom side ,the RX signal (controller) cant activate, i have the same problem ,is it vista not support? thank u

@MY69534 16 дней назад

its connected to the flight ,all good, just cant show the RX signal, sad........,anyone know why? thx

@gimbalair 10 месяцев назад

Hey ona separate note, before goggles 2 I had the naco.txt file on my vista, now with goggles 2, do I have to do anything to still have the extra video transmission power of 700w. IF so a video would be helpful. I am nervous about flashing my fc to 4.3.2 which is the last version available for the babyhawk 2 HD, does OSD work on goggles 2 at 4.3.2?

@nxp200 10 месяцев назад

With the Goggles 2, you'll need to put an empty file named ham_cfg_support (no extension) onto a MicroSD card and insert it into the Goggles 2 before powering up. Then turn it on. This will put your Goggles into FCC mode. To check if this worked, go into Settings -> Transmission -> Channel Mode and switch it to Manual Mode. When you check the 40MHz bandwidth, you'll see 3 channels instead of 1. In terms of the OSD, it should work on BF 4.3.2. I have this video showing the instructions on how to set it up ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gQFcvDB5RC4.html

@gimbalair 10 месяцев назад

@@nxp200 many thanks, found the ham hack, had it on my o3 just not my vistas

@cherylmagadan 4 месяца назад

can you help sir. at first there is a display(osd ) after a minute it will be gone. any fix for this?thanks

@nxp200 4 месяца назад

Sorry. I can only think there is something damaged on the flight controller. Does it come back each time you plug in a new battery?

@NicolasGontran 2 месяца назад

@@nxp200 it do it for me as well

@gsgsgsgs3650 2 месяца назад

I still dont have full use of osd. No GPS distance traveled or distance from home. I have altitude on display but gps speed only show in disarm mode after flight. I wonder if its because im using integra goggles not goggles 2.

@nxp200 2 месяца назад

The goggles shouldn't be the issue here. I don't have much experience in using GPS on my quads, but it may be configuration on Betaflight to show the correct numbers during ARM mode. Perhaps check you're on the correct OSD profile before flight

@upnorthFPVandEUC 5 месяцев назад

Hello, I’ve managed to update the goggles 2 Vista unit and get everything to bind and show video but I cannot for the life of me get the DJI remote control 2 to work.. it just doesn’t show up in beta flight.. any help would greatly be appreciated!

@nxp200 5 месяцев назад

Hmm.. sorry, I haven't actually tried that combination. I recall that combination with RC2 wasn't supported, but I could be wrong. Have you soldered the SBUS wire to flight controller?

@gsgsgsgs3650 2 месяца назад

Check out Nordic Drone Explorer you tube channel its called "HOW to connect pavo 20 with DJI fpv remote controller 2". I used this video to set up my pavo 20. There is a cls command you have to do.

@user-ex8bk8sz3o 6 месяцев назад

Hey do you know what can be a problem if I see OSD for first 5-10 seconds after arming, but then it disappears?

@nxp200 6 месяцев назад

Hmm. Haven't seen that happen before. I would try another vtx (either digital or analog to see if the OSD chip is damaged). Or, check the Tx/Rx wires aren't getting shorted somehow after arming and flying around.

@ag.page. Год назад

Where you able to turn on auto-recording on goggles 2 when you arm…?

@nxp200 Год назад

No. Haven't been able to get auto record on arm to work with G2+Vista. There doesn't seem to be any options for it.

@Azgorsky 5 месяцев назад

on betaflight 4.2.2 you can make osd with caddx vista?

@nxp200 5 месяцев назад

I believe only 4.3 supports OSD with Vista

@fredkaz245 Год назад

Can you use betaflight 4.4 on the dji headset V2??

@nxp200 Год назад

I haven't done this myself yet, but you'll need to root the V2 goggles and install wtf.os software to get the OSD to work. It's different instructions than in this video. Joshua Bardwell does great instructions on how to do this.

@JustKeepLivingFPV 10 месяцев назад

Some values will work straight out, to get everything you will need wtfos.

@koperchuk 5 месяцев назад

Hello 👋 can i bind vista to dji integra?

@nxp200 5 месяцев назад

Yes it can. You'll need to update the Vista to latest firmware

@koperchuk 5 месяцев назад

@@nxp200 thank you

@raptr49 6 месяцев назад

Does this also work with INAV?

@nxp200 6 месяцев назад

I'm sorry. I don't know much about INAV to answer this.

@nakmax 7 месяцев назад

Hi. Do you have the stl file of the ducts on thingiverse? Can you send the link please?

@nxp200 7 месяцев назад

I'll see if I can dig it up and post it on printables for you. I don't upload on thingiverse anymore. Hope that's ok for you

@nakmax 7 месяцев назад

@@nxp200 yes sure, no problem. If you point to me where to find it too, because I don’t know where “printables” is, I’ll be glad.

@nakmax 7 месяцев назад

@@nxp200 lol ok, actually I found printables. I just had to Google it.

@nxp200 7 месяцев назад

www.printables.com/model/652970-impulserc-micro-apex-3-whoop-guard Edit: I forgot that this was intended to be used with the SwitchBlock I designed and the standard original camera mounting on the frame is not supported! Apologies for the mix up! I have redesigned it to allow for standard camera mounting and will print a test version before uploading the STL (to make sure it all fits dimensionally etc)

@nxp200 7 месяцев назад

I just realised I designed this with my SwitchBlock, which means the standard FPV camera mounting is not supported. I'll remix to fix this and upload the new design. Apologies for this.

@efelton2699 Год назад

Motors are you running?

@nxp200 Год назад

iFlight Xing 2 1404 4600kv

@stonefpvthor 2 месяца назад

No osd

@dugy40 Год назад

What commands did you type?

@nxp200 Год назад

set osd_displayport_device = MSP save

@dugy40 Год назад

@@nxp200 I just moved my stuff around and when I went to cli it automatically did it. Didn’t have to type anything.

@nxp200 Год назад

@@dugy40 nice! I don't know what triggers it to automatically set it. I've tried numerous things but it's never done it for me automatically. Unsure if it's a BF 4.4 vs 4.4.1 difference 🤷🏻‍♂️ Glad it was sorted for you👍

@dnafpv 4 месяца назад

Share the file for the ducts?

@nxp200 4 месяца назад

www.printables.com/model/655623-impulserc-micro-apex-3-whoop-guard-standard-analog

@cherylmagadan 4 месяца назад

gogles V2 and vista nebula \

@turionb1408 Год назад

i did all of this but still doesnt work.... anyone else having the same problem?

@alessandrodimartino1872 Год назад

i got the problem too

@turionb1408 Год назад

@@alessandrodimartino1872 still got no answer. I ordered a new unit and a new cable. Hope its only the cable

@nxp200 Год назад

Sorry, I've been quite busy with work and family. I can only think to check the TX and RX are wired correctly (TX from Vista to RX on flight controller and RX from Vista to TX on flight controller) and the correct UART is selected (TX1 and RX1 is UART1 in Ports tab).

@turionb1408 Год назад

@@nxp200 i dont mean you with i get no answer dont worry 😀 yes i did that. I guess something with the unit or the connection cable is wrong. Thank you for your help!