Do This To Improve Your Print Quality - Procolored DTF Settings

Подписаться 7 тыс.

Просмотров 13 тыс.

50% 1

Procolored July Promos: www.procolored.com/pages/proc...
Procolored Printer Packages:
A4 L800 DTF Printer: amzn.to/4eB6a4h
A4 L800 DTF Printer (Printer and Oven): amzn.to/3zuwlcA
A3 L1800 DTF Printer: amzn.to/3ziIPnH
A3 L1800 DTF Printer (Printer and Oven): amzn.to/45QTpOX
Ink For All Procolored DTF Printers (L1800, R1390, L805, L8058, XP600, TX800):
Procolored Ink Set CMYK and 1 White (500ml): amzn.to/3L3oAgh
Procolored Ink Set CMYK and 2 White (250ml): amzn.to/3W04muf
Procolored Ink Set CMYK and 2 White (500ml): amzn.to/3XHk4fa
Procolored White Ink (250ml): amzn.to/4eF7P8R
Procolored White Ink (500ml): amzn.to/3VGAemd
Film:
DTF Film Roll A3 (13 inch x 328 FT): amzn.to/4cCSUKp
DTF Glitter Film Roll A3 (11.8 inch x 328 FT): amzn.to/3WbK0hX
DTF Glow in the Dark Film Roll A3 (11.8 Inch x 328 FT): amzn.to/4eKbGkU
DTF Film Sheets A3 (100 Sheets): amzn.to/3VMaiFZ
DTF Film Sheets A4 (100 Sheets): amzn.to/3VMamFJ
Adhesive Powder:
DTF Adhesive Powder 500g (17.6oz): amzn.to/3RQDSJ9
➤ E-Mail: HaiandTerrie@gmail.com
MUSIC:
➤ Where we get our music (2 Months FREE): artlist.io/Teresita-329409
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, we’ll receive a small commission (at no additional cost to you). This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Развлечения

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@HaiTech 8 месяцев назад

Procolored June Promos: www.procolored.com/collections/brand-day-sales-event?ref=HaiandTerrie

@KTOJRICH. 5 месяцев назад

real quick I just purchased the A3 l1800 roller version needed help with the settings in pro rip as far the width and height for canvas size to print 🖨 I have 330mm off of the procolored main page however I don't know the height 😅 sorry new to this world any assistance would be greatly appreciated 😂 Printer size 750*315*225mm is also some additional dimension

@HaiTech 5 месяцев назад

@@KTOJRICH. how wide is your film roll? 330mm is 12.9 inches. do you have the 13 in roll or the 11 in roll? the height or length can be whatever you decide. for example if you plan on printing something that may be 5 ft long than you would want the length to be at least 5 ft, or 60 inches, or 1524 mm. if you're going to only print a few designs at a time then you can shorten your length. so the length is really up to you and how long your prints will be. there's no set number for the length. the width on the other hand depends on your film roll. if you have a 13 inch roller than your width would be 330mm. if it's an 11 inch roll of film then 279mm. hope that helps!

@Mc-2020 3 месяца назад

very helpful!!!

@iiXotic7 7 месяцев назад

Thank You, this was very helpful!

@HaiTech 7 месяцев назад

You're so welcome!

@Dave_RNWD 7 месяцев назад

Love your videos! Any tips on how to get my L1800 procolored DTF prints softer, not so plastic feel? Any settings or tips? Maybe ink levels ? Would appreciate the help! Thanks!

@HaiTech 7 месяцев назад

I spoke with Procolored last night and they said a new software is coming. not sure if that means a big update to PRO RIP or a new and different software altogether. I haven't found a way to make the ink "thinner" to give it a soft hand feel, but i can ask them about it. i think if the software had a "halftones" feature that would make the print extremely soft and use a lot less ink. a feature that can remove blacks (if printed on a black shirt) or remove white (if printed on a white shirt) would also improve the softness and save ink...but those features i have not seen on the current PRO RIP yet.

@MrBenButtons 6 месяцев назад

One thing I found that helps is using a different shirt for your second press instead of parchment paper or Teflon sheets increases the softness by allot

@Dave_RNWD 6 месяцев назад

@@HaiTech any idea how to use the "Invaginate/Extend" function on Pro Rip, I’ve been haltoning a lot for my transfers, but I can see a white outline of ink around each dot, which then makes the haltoning look bad… any idea or clue how to fix this? "Invaginate/Extend" ?

@HaiTech 3 месяца назад

i have mentioned to Procolored about half tones and color knockouts. hopefully they will have it in their PRO RIP in the near future. i have not used the invaginate/extend function on their software. do you have a white outline on every print or just when you try to do halftones? sorry for late response, youtube didn't notify me of your comment.

@tonycordovatc 10 дней назад

@HaiTech I really hope they add the features of color knockout (black or white) that helps make the prints not look like a iron on or have that white outline around the design

@jalvarez559 6 месяцев назад

Awesome video. I purchased the DTF Pro, and on the combination window I only have 720x1440. Any idea how to make it 1440x1440? TIA

@HaiTech 6 месяцев назад

Good question. I’ll ask them and let you know. My UV DTF also is max out at 720x1440.

@HaiTech 6 месяцев назад

Procolored responded: "the main board is different, so resolution 720*1440 is the best"

@jalvarez559 6 месяцев назад

It does very well with that resolution, but we want to push for more. Also, your ink settings are on point for the Pro. Thank you

@Naybay0903 9 месяцев назад

What setting is your white and color relation on for some reason my white hasn’t been printing

@HaiTech 9 месяцев назад

most of my settings i left the default settings. have you tried to manually pull the white ink with the syringe just to get fresh white ink flowing through the tubes?

@udavid2000 Месяц назад

Hi! I'd like to ask for some advice. What is the smallest font size that can be printed using UV DTF? I find that when I print small letters, they do not adhere to the surface but remain on the film. What should I modify? Could the amount of varnish affect the proper adhesion of the letters? What percentage of varnish should be applied to the text? Currently, I am using 100%.

@HaiTech Месяц назад

Procolored says to increase the varnish. I would contact their support to see exactly how to do that in the PRINT EXT software.

@user-zg4lk6ge6p 4 месяца назад

How do you get your design to print within the lines? I have tried adjusting the letter size, moved the picture over to where it's off the grid, and margins. It still prints off the sheet. What are the proper margins?

@HaiTech 4 месяца назад

which printer do you have? what size is your film sheet?

@Statikleoscamming 7 месяцев назад

On rip software have you ever had rip status failure and the paper light on machine blinks red?

@HaiTech 7 месяцев назад

i have not had rip status failure. i have had the lights blink red yes. i made a video on how to fix the red light blinking situation.

@user-cl4nw3ll7q 5 месяцев назад

Also why can I find my resetter

@HaiTech 3 месяца назад

contact procolored and they can send you a download link for your specific printer

@Ovrland_fam 2 месяца назад

How can i get the adjustment screen that pops up after pressing rip to come back. I think i accidentally pressed the never show again tab 🤦‍♂️

@HaiTech 2 месяца назад

at the top of the PRO RIP software there's a widget icon. click it and there should be an option that says "popup print preview..."

@MrBenButtons 6 месяцев назад

With these settings do you have issues with full color prints cracking after a wash?

@HaiTech 6 месяцев назад

no i don't. are you using original ink and powder or aftermarket?

@MrBenButtons 6 месяцев назад

@@HaiTech yes I am using all original products. I’ve changed some colors to off white to help the ink from cracking but on full color prints with white in them that I can’t change they still crack after a wash

@HaiTech 6 месяцев назад

the crack is due to the adhesive powder. you're probably not adding enough. are you baking it a DTF oven? what heat settings are you using? i have not had this issue at all. i made a video on wash test and we've had fine details on a shirt that had over 10 washes with no cracking.

@frankiespankie86 6 месяцев назад

Why do I have a square surround my image? When I resize the image, it resizes it according to that invisible square around the image. How do I remove that square, if possible. And when I print the image, it prints on either the right side or the left side of the film. Please help if there’s a solution

@HaiTech 6 месяцев назад

the image will be printed depending on where you put it. so in PRO RIP if you have it towards the left, it will print towards the left of the film. the box is just for resizing reference. it won't show up when you print.

@freedomgirl4564 5 месяцев назад

I have the same issue. I resize my image and when it prints it comes out small. There’s a huge gap between the red margins and the image.

@tonycordovatc 3 месяца назад

It's because that's how the picture was saved. Think of it was a background even if the background was removed and it's not cropped down to the edges of the design its self it's gonna think all of that blank background is part of the pic. Make sense?

@tonycordovatc 3 месяца назад

Crop the picture all the way to it's edges of the design

@freedomgirl4564 3 месяца назад

Thank you @tonycordovatc

@Knowledge1032 Месяц назад

Hi i have a question is there a setting for this software to print continuously and not stop halfway through the print

@HaiTech Месяц назад

it should print continuously everything that you set it to print. for example if you printed 3 pictures of mario, it should print all 3 without stopping after the first mario. if it is not doing that you could possibly update the PRO RIP software

@Nallelibebe22 7 месяцев назад

I printed a image with a person and the person looks super red what can I do on my computer they look normal color

@HaiTech 7 месяцев назад

try this video and look at their settings. see if it looks like what you have in your settings. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Sw9PFUHGhrM.htmlsi=k-YY8X_V2LG_r4-- also, have you done a print head cleaning and nozzle check to make sure that no lines are missing?

@SharkTankApparel 2 месяца назад

What color mode do you use on the advanced options in the settings?

@HaiTech 2 месяца назад

i left everything as default and the color looks great. you could play around with it to see what it does to the colors.

@SharkTankApparel 2 месяца назад

@@HaiTech ok. Mine is printing all images good but it prints a red tint. Any advice?

@HaiTech 2 месяца назад

nozzle check shows all print heads firing properly?

@schizodaan 5 месяцев назад

Can you please help me?! If i put the image in the middle and i do RIP it goes to the side. And the ink smudges because of it. Never had this problem but now i cant get any image printed. I try center button and marging but doesn't work. Before rip its fine but after not in the middle. Please help thank you

@HaiTech 5 месяцев назад

hi, i am not sure what is causing that. i would reach out to tech support and get on a video skype call with them

@schizodaan 5 месяцев назад

Yes its difficult because of the timing but thank you

@ChanJon 4 месяца назад

I had the same problem but I resized the paper size on the software and it corrected it.

@MaryDeBerry-tw7td Месяц назад

When I click on the picture image there are no images to choose from. What am I doing wrong?

@HaiTech Месяц назад

what type of files are your images? for best results they should be PNG format.

@jake-co7px 2 месяца назад

Question...if the box "never ask again" accidentally got clicked. Do you know of a way for that window to be visible again?

@HaiTech 2 месяца назад

i'm not familiar with PC, i'm not sure.

@teresacruz-steele7313 2 месяца назад

Try going to advanced options.. preference then click the box saying pop-up printer driver dialog when click RIP

@hectorm2100 3 месяца назад

Does anybody white bleed the shirt color threw if so how do you fix it

@HaiTech 3 месяца назад

you can check their FB group for help or contact their support. they're available after 6PM. M-F is what i was told. facebook.com/groups/194410629223200 Tel: 1-949-738-4529 Skype: join.skype.com/invite/sm4c4ve34w0W Email: afterservice@procolored.com

@hectorm2100 3 месяца назад

Thank you

@janeevangelista6956 3 месяца назад

Can you make a tutorial on how to turn purple to brighter color, not blue?

@HaiTech 3 месяца назад

have you check the nozzle to see if any lines are broken?

@janeevangelista6956 3 месяца назад

Yes I have I see a broken line.what should I do?

@Doctaj54 3 месяца назад

Similar issue here. The purple color looks more blue.

@abbyguitron6530 2 месяца назад

I am having this issue I don't see no broken in the magenta

@patrickmyles9513 Месяц назад

My printer is only printing white and black please help

@HaiTech Месяц назад

please refer to www.procolored.com/pages/supports-and-services scroll you'll be able to skype video call with them and they'll be able to walk you through the problem. thanks

@jeremysauceda4321 8 месяцев назад

Hello. Not sure what the problem could be but when i search for an image it looks like a nice quality image. But once i import it into the pro rip software, the image is quality noticeably worse. And if i print, it does not come out with good quality. Any suggestions what may be causing this?

@HaiTech 8 месяцев назад

how big is the image and how big is the print? sometimes an image may look big on the computer but because of the resolution is small it looks bad once it's printed.

@jeremysauceda4321 8 месяцев назад

@@HaiTech I have tried multiple size images and multiple size prints and they still look blurry. The images look super nice when I download them but when uploading into the software it becomes blurry.

@HaiTech 8 месяцев назад

what file format is the image or images?

@jeremysauceda4321 8 месяцев назад

@@HaiTech jpeg and pdf formats

@antoniocolon1570 6 месяцев назад

Did you fixed it?? I have the same problem

@FallonJenkins-bm5mr Месяц назад

I have imported a large image and it still look very bad. It is a PNG file looks perfect until I import to my rip software.. When I import it looks very choppy

@HaiTech Месяц назад

The image that you're trying to print, what are the dimensions? how big are you wanting to print it?

@jasminephillips7886 4 месяца назад

I try to import mines it wont even come on the screen im about to give up

@HaiTech 4 месяца назад

you can't import an image to print?

@jasminephillips7886 4 месяца назад

Oh wow do you have a video on this

@HaiTech 4 месяца назад

sorry, i may not be understanding the problem. are you having a problem with importing an image or what seems to be the exact problem? Thanks! there's also Procolored's help desk: www.procolored.com/pages/warranty-policy. just scroll down to where it says "Need Additional Help". they'll be able to walk you through whatever problem you may have. they do video call as well.

@user-cl4nw3ll7q 5 месяцев назад

Do you know why my image is coming out of my film

@HaiTech 5 месяцев назад

the image is not staying on the film? it bleeds or runs off? it's probably due to the cure setting. you see that number on the front of the printer? crank it up to 37 or 40

@RobinLozano4 2 месяца назад

My printer is only printing white any help?

@HaiTech 2 месяца назад

have you tried a nozzle check to see if the color nozzles are clogged?

@RobinLozano4 2 месяца назад

@@HaiTechyes I just got it two first print I did is just white no color shame

@HaiTech 2 месяца назад

there's a way to accidentally turn the color printing off and it will just be a white under base. perhaps the setting is no correct. I would contact their Skype support so they'll be able to pin point exactly what the problem is. go to their website and go under Support > Services

@Mupun1949 4 месяца назад

How do you import your logo/design png.file as high quality to the software ProRip. I’m new and having issues with every time I import an image it shows bad quality and print pixels.

@HaiTech 4 месяца назад

i use Canva and Photoshop. if you have files that are SVG or PDF you can resize those in photoshop to any size you want. if you import an image that's large like 4K or 5K then your print will look great. if you need to shrink it a bit then it will even be better looking. now if you have a small image and you import it and then try to print something large, then the quality of the print will be terrible.

@Mupun1949 4 месяца назад

@@HaiTech Thank You, I will try it out this weekend. Does Canva resize high quality file?

@Mupun1949 4 месяца назад

@@HaiTech I notice ProRip software is only for printing only... Is there any software out there you can recommend that allows you to edit/create and print with Procolored DTF printer?

@HaiTech 4 месяца назад

we personally use Adobe Photoshop and canva. for creating and editing those are the 2 that we use and have experience with.