Do we have FM, and how does it work? - Tube Radio Restoration Back to Basics part 9

Подписаться 24 тыс.

Просмотров 2,3 тыс.

50% 1

For me, FM is the most important band on these German tube radios. The quality of the sound and the availability of local stations, make it a must-have feature for me to purchase a radio for restoration.
This band can be a little challenging if it doesn't work, but a thorough understanding of its theory goes a long way to making any fault-finding easier. Let's get to it!
I hope you enjoy the series, and invite you to comment.
🎥 Other videos in this series:
■ Back to Basics 1 - Tube Radio Anatomy: • The Parts That Make Up...
■ Back to Basics 2 - Tube Radio Anatomy: • Checking the Power Sup...
■ Back to Basics 3 - Follow the B+: • How to Check the B+ Sa...
■ Back to Basics 4 - Testing the power output: • How To Check the Power...
■ Back to Basics 5 - How to safely test the output tube: • How to safely test the...
■ Back to Basics 6 - Preamp, Tone Shaping and of lots of detail: • Preamp, Tone Shaping a...
■ Back to Basics 7 - What do those tone presets really look like?: • What do those Tone Pre...
■ Back to Basics 8 - We've got LW and SW, but where is the MW?: • We've got LW and SW, b...
🙏 Want to support the channel? ●●●●●●
/ mcaldeira
paypal.me/macaldeira
#tuberadios #antiqueradio #radiorestoration
●●●● HUNDREDS OF OTHER VIDEOS TO CHOOSE FROM ●●●●
✿ DIY TEST GEAR: The title says it all:
• Zener Diode Tester - P...
✿ RESTORATION BUILDING BLOCKS: A series of videos showing detailed steps used the restoration process of tube equipment:
• How to safely check th...
✿ HowTo's: Various videos on some simple techniques and projects:
• Extend tube radio FM b...
✿ DIY CAPACITOR LEAKAGE TESTER PROJECT: One of the most viewed projects on my channel, with full design description and build instructions.
• Capacitor leakage test...
✿ DIY TUBE TESTER PROJECT: Complete design description and build instructions for this really handy device.
• DIY Tube Tester. Worki...
●●●● Plus full Playlists on some other completed restoration projects on this Channel ●●●●
📻 PHILIPS BX750A:
• Philips BX750A tube ra...
📻 TELEFUNKEN OPUS 2114:
• Telefunken Opus 2114 s...
📻 SABA UW-175-Z 3D:
• Saba UW 175-Z 3D tube ...
📻 GRUNDIG 1070:
• Grundig 1070 tube radi...
📻 SCHAUB-LORENZ GOLDY 58 type 3020:
• Schaub-Lorenz Goldy 58...
📻 BUSH VHF64:
• Bush VHF64 tube radio ...
📻 GRUNDIG 3060A:
• Grundig 3060a tube rad...
📻 TELEFUNKEN OPERETTE 8:
• Telefunken Operette 8 ...
📻 GRAETZ SUPER 171W:
• Graetz Super 171W tube...
📻 LOEWE-OPTA MAGNET 3737W:
• Loewe-Opta Magnet 3737...
📻 BRAUN ATELIER 3:
• Braun Atelier 3
📻 LOEWE-OPTA TRUXA STEREO 4741W:
• Loewe-Opta Truxa Stere...
📻 GRAETZ COMEDIA 616:
• Graetz Comedia 616 tub...
📻 SABA FREIBURG W2:
• Saba Freiburg W2 (WII)...
📻 GRAETZ MUSICA 4R417:
• Graetz Musica 4R417 re...

Наука

Опубликовано:

7 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@tanveernaeem1157 Месяц назад

Another great educational video. Love the way you isolate/erase the non concerning sections of the schematic which makes schematic clean and easy to understand. Must admit you are not only dextrous in what you do, but also a brilliant teacher. Thanks for sharing your knowledge and keep up the good work of creating this one of a kind RU-vid content.

@electronicsoldandnew Месяц назад

My pleasure

@kilcar 19 дней назад

Great FM video tutorial! Now , I hope we can hear you play those guitars! I built a VOX Jaguar Heathkit combo organ in high school in 1969, which planted the seed of interest in electronics. Iyour turtorials are immensely interesting and informative. Thanks for all you do from us in Bend, Oregon, USA

@DavidTipton101 23 дня назад

So much effort in doing the circuit drawing clean up Manuel, kudos 👍 It takes some experience to get one's head around the ratio detector and how it works. In reality, you only need to be able to understand what it's doing and how to set it up. I learn a bit more each time I do one, I expect to learn more when I see you do the FM alignment. 👍🙂

@electronicsoldandnew 23 дня назад

The cleanup is part of the routine that I actually find very relaxing 😊 I read a description recently about a different type of detector, and the author said, “if you can’t understand the theory, look at it as you would an IC”. Made a lot of sense 😊

@erikdenhouter Месяц назад

FM ratio detector, layman's explanation, that's all I have: when you observe the bode plot, the graph for the frequency response of the 10.7 filter(s), you will see a mountain top, and on both side the flanks decreasing. That means that a deviation from 10.7 MHz will give a decreasing amplitude. So when you use the flanks (the part as linear as possible), the amplitude (the Voltage output) is somehow proportional to the deviation from 10.7. In that way they change frequency deviation into Voltage fluctuation, hence sound.

@electronicsoldandnew Месяц назад

That is a great explanation 👍

@robturner3065 Месяц назад

That was a great walk-through of a practical fm schematic. In the simplification process it would have been nice to replace the eabc80 with a couple of diodes for clarity. The din symbol for all those diodes with little blobs for cathodes can be hard to get your head round

@electronicsoldandnew Месяц назад

👍

@JonRig Месяц назад

Great vid, as always! I am really enjoying this series!! I have picked up so many useful snippets on every one. I agree with you with regards FM. The German ones seemed to be the first to have it (1950-ish onwards) and those are the ones that interest me. There are some beautiful looking AM-only radios out there but I like to be able to enjoy how they sound and not just look at them!!

@electronicsoldandnew Месяц назад

Agreed. I like to restore the AM for the sake of curiosity, but the Fm is really the only band that’s actually useful these days.

@DavidSmith-zx7wz Месяц назад

Great content! Really helps us learn. Thanks

@electronicsoldandnew Месяц назад

Pleasure

@danielsaturnino5715 Месяц назад

Very Nice. Thank you

@electronicsoldandnew Месяц назад

Pleasure

@josephmagedanz4070 Месяц назад

Thank you!

@electronicsoldandnew Месяц назад

Pleasure

@tubeDude48 Месяц назад

Well done, my friend! 👍 Unless you have covered this in the past, (can't remember); you might want to go over tube designation. i.e., in the US, a 12AX7 would mean the 12 stands for a 12 volt tube, the AX would be the manufactures designation, and the 7 means there are 7 elements inside the tube.

@electronicsoldandnew Месяц назад

👍

@user-wo6qn3vf9n Месяц назад

We have had FM since the early 50s, if you don't know how it works now you never will. Perhaps you can tell us the joys of 405 line TV next.

@electronicsoldandnew Месяц назад

TV is definitely not in my plans 😊

@robturner3065 Месяц назад

I listened to FM radio this afternoon. Last time anyone watched 405 line TV Tiswas was still on...

@electronicsoldandnew Месяц назад

😊

@mackfisher4487 Месяц назад

To bad we don't have an internet Bot filter for RU-vid

@electronicsoldandnew Месяц назад

😊

@douro20 Месяц назад

Have you come across any which use a phase detector with a gated beam tube? I know they were more common in television receivers but they were also used in FM radio receivers as well.

@electronicsoldandnew Месяц назад

Never had one of those

@ralphj4012 Месяц назад

Educational, as always. Though, saying anode, when your preference is tube, is not permitted, ho, ho.

@electronicsoldandnew Месяц назад

My tubes have anodes, and my valves have plates. I’m a confused Portuguese 😊

@robturner3065 Месяц назад

@@electronicsoldandnewlol that's understandable, when I lived in Brazil the valvulas had placas not anodos

@electronicsoldandnew Месяц назад

😊

@BobAndersson Месяц назад

Nice one Manuel. But what is it about these radios that induces that faint audio whistle/oscillation between stations on FM? I often hear it and I have yet to understand how to kill it. I'm assuming it's feedback as the intensity usually seems to change as you increase the received frequency. Maybe an instability in the ECC85 FM local oscillator circuit? BTW I'm totally with you on tuning the ratio detector - I was fortunate to pick up a Keithley 2015 meter last year and now I just go for minimum THD. So much easier than fiddling with resistors and microammeters! 🙄

@electronicsoldandnew Месяц назад

Those whistles can be tuned out in the front end, but I wouldn’t mess with it if it can be avoided 😊 I’ve been looking for one of those meters, but the prices are a little steep. That is indeed the best way to do it.

@stephenkelly8156 Месяц назад

I am thinking of getting this portable oscilloscope with a signal generator. Do you think it would be useful to do alignments? FNIRSI DSO153 is the make and model. Love your videos and teaching methods!

@electronicsoldandnew Месяц назад

Isn’t that the one that goes up to 200kHz? If so, it won’t work for alignments.

@stephenkelly8156 Месяц назад

@@electronicsoldandnew AM only?

@erikdenhouter Месяц назад

@@stephenkelly8156 Generator is 10KHz max. Only for audio.

@borismetodiev3218 Месяц назад

Awesome video as always! Don't stop making these videos because they are really helpful for me and for others as well. I've been following your channel for quite some time because I have a tube radio that doesn't work and I am trying to fix it. I've been wondering if you can give me some advice/help me fix my radio. If you are willing to help me, just give me an email or a phone number and I'll leave you a message. Thanks!

@electronicsoldandnew Месяц назад

I’m afraid my time is very scarce and I barely have time for my own projects. The best I can do is share some info on these videos and thereby hopefully help you to do it yourself.

@borismetodiev3218 Месяц назад

@@electronicsoldandnew Okay, I fully understand you because I am actually still at school and I kniw that feeling when your time is limited. I'll be waiting for a restoration of a radio that has the same problem as mine. Thanks for the respone and if you were wondering, my radio is a Rigonda 102 :)