Тёмный

Dodge 42RE / 44RE / A500 - Inspection 

Southpaw Autoworks
Подписаться 23 тыс.
Просмотров 8 тыс.
50% 1

Learn what it takes to inspect the Dodge 42RE -44RE automatic transmission.
The best parts, tools, and techniques, will be null, and void, if damaged parts are used during a rebuild. That being said, a thorough inspection is the first step towards a successful rebuild.
This trans has numerous names and generations:
A904 (Chrysler 904, Dodge 904, Mopar 904, TF6, TorqFlite 6)
A500
40RH
42RE (42RH)
44RE (44RH)
Vehicles:
89-03 Dodge Dakota
98-00 Dodge Durango
89-01 Dodge Ram Pickup 150 / 1500
89-03 Dodge Ram Van B150 / B250
93-04 Jeep Grand Cherokee
96-98 Jeep Grand Cherokee 5.2 V8.
Help This Channel Grow:
Coming Soon!
42RE - 44RE Teardown:
• Dodge 42RE / 44RE / A5...
*****Transmission Inspection Vids*******
NP 435: • NP 435 - Inspection
TH400: • TH400 Rebuild Series -...
RESOURCES:
1) Safety-Wear: 😷
A) Comfortable Safety Glasses (3M):
amzn.to/2JguhZN
B) Awesome Nitrile Gloves: 🧤
amzn.to/2Y6XwSN
3) 42RE Repair Manuals: 📕
amzn.to/3z8o0bu
amzn.to/3zcwEG5
4) 42RE Tools: 🔧
Craftsman 230-Piece Tool Set: amzn.to/2L0AtWv
T-25 Torx: amzn.to/3ToTQZP
Pump Puller: amzn.to/2VmhXgZ
Pump Pry Bar: amzn.to/3zO3cFN
Pump Slide Hammer: amzn.to/3p8W0iO (Adapters: amzn.to/3Ql8FLi )
Palmgren 3-Ton Arbor Press (12 inch working height): amzn.to/2Reqmyx
Lip Seal Installer: amzn.to/2Gz4KI5
Lip Seal Installer (Huge Time/Headache Saver): amzn.to/2MxUC8O
42RE Overdrive Housings Tools: ebay.us/Qo9B4V
Universal Clutch Spring Compressor (Use in trans & drums): amzn.to/2YHQGn6
Adjustable Clutch Spring Compressor (Use with shop press): amzn.to/2W2DAQs
Snap-Press (Use on bench): ebay.us/GSlvak
Universal Bushing Driver Kit (Larger Sizes): amzn.to/2M1aQHn
Universal Bushing Driver Kit (Smaller Sizes): amzn.to/2Et1ON3
Snap Ring Pliers (Clutch Spring Compressor Snap Ring): amzn.to/2GwwixP
Snap Ring Plier Set (Pump Circlip Snap Rings): amzn.to/2IUxpdu
5) 42RE Parts: 🔩
Reman Unit: amzn.to/3Sv82zd
Overhaul Kit:
amzn.to/3W0H2e2
Valve-Body Kit:
amzn.to/3TRvR5q
Bushing Kit: (Includes OD section)
88-E92: ebay.us/LjDFSQ
L92-E99: ebay.us/tosIRT
Bearing Kit (OD Housing): ebay.us/xN8o3b
Washer Kit: ebay.us/1av6Uy
Filter Kit: ebay.us/lSiM9z
Filter: ebay.us/IQpDBH
Gasket (fiber): ebay.us/WdCD6y
Band (Front) (Intermediate): ebay.us/n5EEbh
Band (Rear) (Low/Reverse): ebay.us/pQmGsh
Low Roller (One-Way): ebay.us/C5RvKB
OD Overrun Clutch (One-Way): ebay.us/DHurww
OD Planet Carrier: ebay.us/yZa7lT
Electrical:
Solenoids (3-4)(TCC): amzn.to/3Dotm58
Solenoids (Governor & Transducer):
Early: amzn.to/3Ss9Jxf
Late: amzn.to/3D4alDw
Neutral Safety Switch:
Early: amzn.to/3DBa6BH
Late: amzn.to/3VVD1Y4
Output Speed Sensor: amzn.to/3Du1fSg
6) Shop Supplies: ✏️
Assemblee Goo (LubeGard): amzn.to/2WrN7nT
Thread Locker (Permatex) (Blue): amzn.to/2YLtmFk
Brake Parts Cleaner (3M): amzn.to/2HxQ1Pz
Cooler Flush: amzn.to/3TvJA1Z
DISCLOSURE: 🕵
Links provided are affiliated links with the associated websites. While there is no extra cost to the purchaser, a small portion of the sale goes to support this RU-vid channel.

Авто/Мото

Опубликовано:

 

26 окт 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 52   
@alexanderworthen202
@alexanderworthen202 Год назад
By any chance are you guys going to be doing a video showing how to rebuild the 42RE? I love the videos, they are super informative and actually show what your talking about. Thanks
@SouthpawAutoworks
@SouthpawAutoworks Год назад
It's a definite possibility. We strive to show more than most are willing to share (technical info, camera angles, etc). The positive feedback is appreciated. Thanks for dropping us a line.
@scottmaurer2105
@scottmaurer2105 Год назад
Just about done with me first rebuild. 42rh 1995 Dakota. Shop rebuild cost more money than truck is worth. Good time to learn. I've been following a 7 year old video that is definitely a great help, but your inspection video was far more in-depth. Wish I had found it a month ago. Definitely do the rebuild video to help future "home rebuilders". Played and paused videos multiple times thru the rebuild. Life saver.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
1st rebuild...right on! The positive feedback, on the inspection video, is appreciated. Thanks for dropping us a line, Scott.
@randy1ization
@randy1ization Год назад
im getting ready to do one in an 89 dakota any advice appreciated
@randy1ization
@randy1ization Год назад
how much did the shop want to do it?
@randy1ization
@randy1ization Год назад
ive heard tranny shops mostly buy rebuilt trans from national companies now, and install it with a 3 year manufacturer warranty. this is why trans shops that rebuild them locally are closing shop. its cheaper to just buy a rebuilt engine from a national mega rebuilding operation, then to pay a rebuild tech . in my area of abt 125,000 people, theres only abt 3 shops that actually build them in house.
@scottmaurer2105
@scottmaurer2105 Год назад
The shop wanted $2400 in the truck and $1800 out of it. Just put it in 2 weeks ago. 500 miles so far and running great. It's definitely a sense of accomplishment. Just take your time and reference a manual and videos as you go.
@mikemesaful
@mikemesaful Год назад
Great video! Thanks for the help.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Thanks for watching, and dropping us a line.
@heatherbelford73
@heatherbelford73 Год назад
My husband love watching your videos. He says please do a rebuild on 42re!
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Very cool! Input received. Thank you for leaving a comment. Much appreciated.
@royalmotor6167
@royalmotor6167 7 месяцев назад
we enjoy your video, You were explaining it so good and understanding specially for E. second language people you did awesome job SIR. more power to you and us out here that you making these great video that, make it easier for us to follow and do a good job we thank for that SIR. HAPPY HOLIYDAYS. SALUTE.
@SouthpawAutoworks
@SouthpawAutoworks 7 месяцев назад
Thank you. Happy holidays to you, too.
@Thegoobmancometh
@Thegoobmancometh Год назад
Please rebuild! I'm doing one of these right now my first automatic transmission and I could really use the help!
@SouthpawAutoworks
@SouthpawAutoworks Год назад
1st auto trans rebuild? Right on! We are excited for you. We're currently making our way through a full rebuild series on TH400. We would like to do a rebuild series on this Dodge transmission. Just not sure when we will get around to doing it.
@gummywurms226
@gummywurms226 Год назад
I second this, I'm considering rebuilding my 42re, and it terrifies me.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Input received. Thank you.
@kenchaffin4946
@kenchaffin4946 Год назад
How do you guys not have a show on TV yet so informative.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Do we know anyone that could help some fellars out with that sort of thing? ( @ Vice Grip Garage ) Thanks for dropping us a line, Kenny!
@ilich444444
@ilich444444 Год назад
🔥🔥
@jeannebowers8856
@jeannebowers8856 Год назад
I agree perhaps you guys can become a TV show like Tool Time?
@michalwalenciak2478
@michalwalenciak2478 Год назад
Very good video, very good quality. Please keep going guys. Thank you. Greetings from Scotland! When you gonna put this unit back together?
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Scotland...right on! Not sure, yet. It's a matter of us getting enough interest, and making the time to get it done. We're currently working on a TH400 build series. We're almost one with that one...if you're interested in seeing something get built. TH400 Build Series: ru-vid.com/group/PLMK9OC5NGhbgVgAwDO_rCGFF38T1LjkS7 The positive feedback is appreciated. Thanks for dropping us a line, Michal. Edit: I just remembered that you commented on the TH400 Build Series. My bad. ha Lots of comments to respond to. Thanks again, Michal.
@michalwalenciak2478
@michalwalenciak2478 Год назад
Hello Southpaw! Watching you guys whenever I can ☺️ Not enough time to do everything. World is spinning to fast and in every possible direction 😅 At least feels like it 💥🤔😉
@trevorthomas6043
@trevorthomas6043 Год назад
I did the GM conversion running GM sensor,
@jasongill828
@jasongill828 Год назад
this was informative. i will be rebuilding my 42re and np242 over the next month, enjoy the detail he explains. but.... what are the dimensions on that od spring compressor tool lol.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
I'm so glad that you found the video worthwhile. Andy really does a great job highlighting important details. The OD spring compressor tool is a DIY build. It's a 4-inch outside diameter. Roughly 6.5 inches long. I got this particular piece of pipe from a well driller. If you hit up a well driller, in your area, you might be able to land some "scrap" pipe, for free. WARNING: Per the video, that OD spring generates a LOT of force. I treat it like a bomb that's waiting to go off. You really gotta be careful when working with it, and around it. Not being hyper careful with this spring could result in serious injury/death. If you don't have the tooling to safely get the OD section apart/together, you can always take this section of the trans to a transmission shop. I imagine they would be happy to help. As you saw in the video, it's something that can be done somewhat quickly. Thanks for dropping us a line. Wishing you all the best. -Robert
@gartheligon140
@gartheligon140 Год назад
Hey Robert, I'm glad I found your channel I'll looking at all your vids, what do you use to lube the seals? Thanks.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Welcome aboard! Here's what I use. amzn.to/2WrN7nT DISCLOSURE: 🕵 Links provided are affiliated links with the associated websites. While there is no extra cost to the purchaser, a small portion of the sale goes to support this RU-vid channel.
@diggerharison7234
@diggerharison7234 4 месяца назад
Really interested in a band adjustment video!!!
@SouthpawAutoworks
@SouthpawAutoworks 4 месяца назад
Noted. Thank you for sharing that.
@whatwasthat3269
@whatwasthat3269 Год назад
Absolutely top notch content, thank you! I've got a 44re hums for a few seconds on startup after overnight sitting. It goes away quicker if i put it in neutral. Any ideas? Also is there a link for donation for asking questions?
@SouthpawAutoworks
@SouthpawAutoworks Год назад
What you are describing sounds like a converter drain-back issue. When the engine is running, the pump sends fluid throughout the trans. The Torque Converter is continuously fed oil. Under normal circumstances, it's completely filled with oil. However, internal transmission leaks can allow some oil to drain out of the converter, when the engine is off. This can happen when the vehicle is parked overnight....or parked for days on end. It's not uncommon for these Dodge transmissions to experience converter drain-back. It can be caused by a number of things. Worn out Manual Valve/bore (mostly an issue that affects diesel applications), worn out bushings (pump & stator), etc. Goes way quicker in Neutral: This is because the oil has a more direct route to feed the torque converter with the shifter in Neutral, on this particular transmission. With the shifter in Neutral, the converter gets filled faster. If you're interested in supporting this channel, here are some options. Thank you for your consideration. 1). Patreon: (monthly) www.patreon.com/southpawautoworks 2). RU-vid Membership: (monthly) ru-vid.com/show-UCx_RrH0NPRyKoz9LwBa69hwjoin 3). Donation: (one-time) www.paypal.com/biz/fund?id=9UPJA54D8R74A
@whatwasthat3269
@whatwasthat3269 Год назад
@@SouthpawAutoworks thank you very much for such a detailed response. im glad to donate
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Donation received. Thank you! Really appreciate you supporting the channel.
@cockasorrus7475
@cockasorrus7475 Год назад
Great job! I have a 99 ram 2500 Cummins. Good to know the issue with the overdrive housing. As of now it seems to be working fine. The only thing is the TCC has a tendency of going in/out around 45-60. I thought I had it fixed with a $30 wire off Ebay that connects to a wire on one of the three computers on the firewall. It is then grounded to a GOOD ground. I put it to the ground off the battery to the RH fender. I believe mine is a 47RE Thanks again! PS is it possible to put the TCC on a switch?
@SouthpawAutoworks
@SouthpawAutoworks Год назад
I understand/recall that you've run the redundant ground for the PCM...which is a good practice. Have you, by chance tried these other things: 1). Running a redundant ground from the battery ground to ground wire at TPS sensor? 2). Disconnecting alternator power wire (or fuse), and try driving it, and see if the problem goes away? 3). Check output speed sensor/wiring? It's the sensor located on the extension housing of the trans. Note: The sensors are magnetic, and collect debris. Derbris on the internal end of the sensor can cause TCC issues. To answer your question... We imagine that it's possible to bypass the PCM, and manually control the TCC operation. However, we have not done this sort of thing. Imagine that the PCM will throw a check engine light when the TCC lockup solenoid is no longer present (voltage).
@IslandManMitch
@IslandManMitch Год назад
Will you be doing a rebuild on this transmission? It would be great if you did. Maybe with as much upgrade as you can.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
It's a definite possibility. Noted. Thank you for your input. Appreciate you watching, and dropping us a line.
@randy1ization
@randy1ization Год назад
is a 42 rh the same as a 42 re? other than the TV cable for the hydraulic shift?
@SouthpawAutoworks
@SouthpawAutoworks Год назад
They're the same units, with some exceptions. The rotating assembly (shafts, drums, gears) are the same. However, the controls are different. The "H" in the RH stands for hydraulic. The "E" in RE stands for electronic. H: Uses a governor (hydraulic device mounted on output shaft)(it detects road speed)(sends oil pressure to valve-body). E: Uses a governor solenoid (mounted on VB)(sends oil pressure to VB....just the like old-school shaft-mounted governor). And there's more to this... OSS (Output Shaft Speed sensor) vs old-school speedo, transducer, temp sensor, etc. Both RH and RE units use a TV cable.
@randy1ization
@randy1ization Год назад
@@SouthpawAutoworks awesome thanks!!!
@randy1ization
@randy1ization Год назад
PLEASE do a build vid!!! thanks
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Input received. Thank you.
@baratrahmani4023
@baratrahmani4023 Год назад
Hello please can you post reassemble the transmission
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Input received. Thank you.
@israelflores5097
@israelflores5097 4 месяца назад
Where are you guy's located at
@derekdoble4438
@derekdoble4438 6 месяцев назад
Where is part 3 reassembly of the 42re?
@SouthpawAutoworks
@SouthpawAutoworks 6 месяцев назад
There is no build series, at this point in time.
@vipersquad3
@vipersquad3 8 месяцев назад
Do a rebuild
@SouthpawAutoworks
@SouthpawAutoworks 8 месяцев назад
Noted. Thank you.
Далее
46RE Common Problems
22:28
Просмотров 64 тыс.
Chrysler 46RE Class Part 1 lesson 3
32:25
Просмотров 251 тыс.
GM 4L60E Assembly - Time-Lapse
16:33
Просмотров 953
42RH / A500 Transmission Rebuild: Part 1 - Tear Down
38:23
TH400 Build Series - Pump + Front End-Play
32:43
Просмотров 8 тыс.
62TE Rebuild Part 1
51:45
Просмотров 67 тыс.