Dodge Sprinter No Power/Limp Mode, DPF Ash Accumulation too high & Exhaust Temp Sensor Issues Part 1 

DEAR SIR, YOU ARE AS CLEAR AS THE SUN LIGHT WITH YOUR DIAGNOSTICS. RIGHT ON THE MONEY. THANKS A MILLION.

This is Sprinter Academy. I like the way you analyze the entire process. Great videos. Thank you.

I would have to say the poor Sprinter is overdue for some serious maintenance. Always enjoy watching this RU-vid channel. Thank you K Diagnostics

Great work done, like always!

Thanks! I like your very educational videos. I live and Norfolk Virginia. I have a Mercedes Benz Sprinter 2500 which has lit up the check engine light recently 2 days after I took it to dealership for state safety inspection. If your only within an hour away I'd to schedule my sprinter for diagnostics and repair. You got my complete confidence. Even with check engine light the engine is running fine but after a while of running it above 60 mph it seems like the the turbo is weakening.

EXCELLENT MR.K Understand clearly you are the best.

Congratulations to are class mate for promoting are channel, good work for K Diagnostic to, thank you

Tampa Florida check in love your content

Love love your videos mate. I just discovered your vids 3 weeks ago. Your very good in the explanation of what your doing. Your the first guy I’ve subscribed too. And I have watched thousands of videos. That said. I’m having trouble with a P0471 code on my 2012 Mercedes 3500 sprinter. It comes and goes on its own. I have replaced the exhaust pressure sensor. At least I think I have. Any chance you could address the code problem in a video. And showing where this sensor is and how to correctly test it and wiring to it. Thanks in advance for any light you can shed on this matter

I think that 572 is a default number that the computer outputs when it detects a problem with the sensor. It recognizes it can’t trust the actual information, so it randomly displays a default value. The reason I say that is exhaust temps normally get to 500+\- during normal driving, so it shouldn’t recognize that as too high. Not that it matters because you still identified a defective sensor. Awesome diagnostic process.

Great video 👊🏼

very good job....Thank you.

Good Job👍🏻

awesome Big Thank

Thank you for your video very informative and helpful, can you come to my van ? I’m in South East London 😂

Thanks!

Thanks ☺️

I live in Idaho. You would be worth the trip.

Hello . Great job you are doing, I wanted to know the step by step technique please to properly adjust the shifter cable on the sprinter 518

Hi K Diagnostic, your videos spot on 10/10, I'm wondering if you can help me with my VW Crafter 50 Van, 2.5 lts. turbo diesel, 2010 model, my little OBD2 reader, show me P2BAC, Nitrogen oxides, limit exceeded, and P2002: DPF exceeded threshold bank 1, I had cleaned exactly like you showed me in your videos, with Liqui Moly, cleaner and purge, with the Liqui Moly spray gun as well, white smoke coming out, like your videos, I was so happy, but after 20 minutes on the Fwy, the engine when into a limp mode, back home slowly, then I changed the oil, filter, and carried out and other cleaning with Liqui Moly again, no much smoke coming out this time, but I couldn't get out of the limp mode, my little reader doesn't let me, the question is how I can got out the limp mode, also which scanner do you recommend to carry out the DPF regeneration, and others stuff, but not the $10k the Snapon Zeus, too expensive for me, Autel for DIY- Small Shop, will do it thanks

Great video thank you, I have a coupe with EML on P0428. Car drives fine, can you point me in the right direction please?

Hello buddy and thank you for all of your help. I own a 2016 sprinter 3500 Dully that 3 lights came on, abs, anti skid (anti lock) and tire pressure sensor light, according to online info it said it was the abs sensors but o didn’t know which one so I went ahead and installed all 8 of them 4 and and 4 wear pad. I started it up and the lights were stop there, tried to clear codes but lights never went away. So I took it got a drive thinking it needed to be driven for codes to clear but the vehicle is now in limp mode, it doesn’t drive and when you try driving it its max speed is about 20 mph and the brake light comes on but shuts off when you stop. Please help. Thank you

Mass airflow sensor 🚙

Nice work men where you located.I got a 2007 dogde sprinter van too I will like for you to check it out for me. Thanks

Hey i have a ban wit the same problem...im at south carolina. Were you have your shop?

So please let us know where is your shop I want to bring my 2008 dodge sprinter to you

Can you tell me with how I can spray to clean the DPF later

brother help me out… where is air intake temperature sensor located on that engine?

Hello , it's helpful , wonder to know the the model and make of the scan tool you use , mind to share the model and make of scan tool please ?

Hi handsome, more videos please. Thanks

Boss please answer me When l drive the van like 10-15 min after a beeping in the dashboard and start loosing power ( do you think turbo is bad )

I own 2012 Sprinter 2500, with same issues. Currently the van won’t start at all! Does anyone think that a badly clogged DPF can cause a NO Start? Mr. K , please chime if you can

Hey buddy I got a 18 3500 sprinter with dpf tampered shut down

How you clear disabled starter motor due to tampered dpf sistem After mechanic replaced nox sensors

I also have no power when I put it in reverse, you have to step on the had too much to make it move. It only has 40K miles

Where are you located?

Hi ! Where are u based?

112k miles..,maybe that sprinter🤔is lowerQuality then M.B??my is a M.B.2014..with 260k Miles..and i just did clutch,flywheel and all brakes with discs..but dpf and cat i will replace soon..i already loosing power..without check engine light on.

2021 Sprinter code P2457, what is it?

What is your business name and address I like to bring my sprinter to you