Does it really matter which tool you use???

Tomislav Tomasic Woodturning (Dodir Drva)

Подписаться 50 тыс.

Просмотров 7 тыс.

50% 1

Hope that purpose of my videos are visible and that is to get you to know all the options and how most tools get the job done in same fashion but with diffent journey.... So find what you are good at using and master it...
Hope you'll get something out of this video
Enjoy
_________________________________________________
MY LATHE
drechslershop.de/en/wood-lath...
STEINERT WEBSITE
drechslershop.de/en/?sPartner...
AFFILIATE LINKS
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idevaffiliate.com/i...
SCRAPERS - neureiter.idevaffiliate.com/i...
CRYOGENIC BOWL GOUGES - neureiter.idevaffiliate.com/i...
WOODCUT PRO CUTTER - neureiter.idevaffiliate.com/i...
WOODCUT PRO ADVANCE - neureiter.idevaffiliate.com/i...
IRONS SHEAR SCRAPER - neureiter.idevaffiliate.com/i...
WOODCUT BOWL SAVER - neureiter.idevaffiliate.com/i...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz/gurtool-pm-dut...
Spindle gouge -www.gurtool.cz/vretenovy-stru...
Calipers - www.gurtool.cz/hmatadlo/
Sanding pads - www.gurtool.cz/unasec/
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr/CBN-brusna-plo...
BENCH GRINDER
www.tobi.si/hr/Stolna-dvostru...
DIAMOND FILE
www.tobi.si/hr/Arbortech-diam...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

Хобби

Опубликовано:

21 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@robertcornelius3514 9 дней назад

6:43 That Sorby is much, much louder than your skew chisel.

@ShevillMathers 3 месяца назад

My number one go to turner together with Richard Raffan. The close-up detail is exactly what we need, in sharp focus, with no waffle, sadly loved by so many turners. If a demonstrator starts telling me what his aunt had for breakfast a week ago, I stop and watch no further. My time is limited, I used to teach a medical science course and every word had to have value, students have limited time. Some demonstrators in wood turning are almost dangerous, some feel they always have to have their face and walls of tools in shot, basically a waste of time. Every video I have watched between these two experts has taught me volumes, hard to beat in my opinion. Greetings from Tasmania Australia 🇦🇺 😊

@WhoGnu08 3 месяца назад

I completely agree with your assesment. Richard and Tomislav are there to teach, others are there to entertain. I prefer the teachers.

@danielmetzler307 3 месяца назад

I very much agree with all of this

@Winterbourne_wood_turning 3 месяца назад

I have to agree with all of the above comments. Tomislav and Richard are my go too Chanel’s . Tomislav explains tool use very well and I love to see how much Richard can get out of a lump of wood at the bandsaw😅

@tomislavtomasicwoodturning 3 месяца назад

Thank you all for this kind words,means a lot to get a feedback like this.☺️

@wimdejong5399 3 месяца назад

Thanks, you teach very well, easy to understand and easy to implement.

@robohippy 3 месяца назад

The Spindle Master from Sorby was their attempt to recreate an Allen Batty tool, and in Allen's words, "they got it all wrong!". To me, they were way too thin and I would get a lot of chatter. I do have several of Doug Thompson's 'fluteless gouges, which are half round stock and 5/8 inch on down to 1/4. I do like them, mostly for a BOB (bottom of bowl) tool with a 65 degree bevel. There was a similar bigger tool, I think Trach Owens was the maker, but they weren't around for long, maybe 1 inch wide. I really need to make one of the Del Stubbs variations. The Allen Batty tool was more similar to Cindy Drozda's 'vortex' tool, which was swept back quite a bit and good for getting into deep spots for detail type work. I have one, but don't use it much, in part because I don't do that type of detail work.

@tomislavtomasicwoodturning 3 месяца назад

Yes, Im Aware of all different options,most of them I tried,this somehow feel right and fits me... For lack of better words 😂 Thank you for your input sir

@MarklTucson 3 месяца назад

Excellent comparison. Your conclusion makes sense -- the wood doesn't know what tool you are using, it only knows the cutting edge and angle being presented to it.

@jackthompson5092 3 месяца назад

Great lesson Tomislav.

@balahmay 3 месяца назад

12:15 “just raise and lower the handle”. I’m mentally storing that technique for future use! Thanks Tomislav!

@tomislavtomasicwoodturning 3 месяца назад

We all do that 👍 thank you for watching

@racheldray1057 3 месяца назад

So useful. Thank you.

@jackcollins2349 3 месяца назад

I’ve discovered your videos some time back and the more I watched them the more intrigued I was. You are clear and concise in your instructions and typically get to the point rather quickly than opposed to dragging it out just because. You have quickly become one of my favorites. Awesome job with all the variety.

@tomislavtomasicwoodturning 3 месяца назад

Thank you sir, really appriciate that ☺️

@michaelstraws2544 3 месяца назад

Great demonstration of how these tools work. Thanks for sharing this.

@johnnyb95678 3 месяца назад

Thank you for the great demonstration on the use and comparison of these 4 tools in the various situations. Thank you!

@tomislavtomasicwoodturning 3 месяца назад

Thank You Johnny for watching and support what I do 🤗

@naokoiwata5308 3 месяца назад

this video was great! learned a lot.

@todrosenberg6054 3 месяца назад

I really like your method of teaching .Wish I was able to find someone in my area with your skill and teaching ability to further my knowledge. Great job!!!

@tomislavtomasicwoodturning 3 месяца назад

Thank you very much, If you can't find anyone, then just spend more time practicing, its longer path but also you can learn a lot on it

@user-qk2hw9zj1s 3 месяца назад

Великолепно, Томислав! Отличное видео, которое снимает все вопросы.Это прекрасные инструменты для мелкой точной работы. После твоего первого видео я сделал себе такой же, прекрасно работает. Тем более, что с перекосом у меня до сих пор небольшие проблемы. Спасибо огромное за твою работу., за учёбу и знания, которые приходят от тебя. Удачи тебе!

@tomislavtomasicwoodturning 3 месяца назад

Thank you very much 🤗

@iancompton6961 3 месяца назад

thanks Tomislav - once again your videos give us more information and incentive to increase our skill with different tools.

@tomislavtomasicwoodturning 3 месяца назад

Thank you Ian

@christopherharrison6724 3 месяца назад

It’s always useful to learn more about how to use the tools

@TheOtherGuybo 3 месяца назад

You are awesome. I will share this video often with new turners. So useful for standard spindle shapes - Thank you!

@tomislavtomasicwoodturning 3 месяца назад

Really glad to hear that ☺️ thank you very much

@edwardukleja4583 3 месяца назад

Hi Tomislav, as always a great lesson but I think that what ever tool we choose to use, with practice we can achieve a good finish. Ultimately there is no perfect tool, cutting will generally give a better finish than scraping on most woods.

@tomislavtomasicwoodturning 3 месяца назад

You Are Right Edward, I might add that some tools are just feeling natural for someone so I always like to investigate option and its fun for me as well to test it.☺️

@bradbyers7505 3 месяца назад

Great comparison of the tools. I just need to practice more with them.

@scottstubberud1137 3 месяца назад

You say “hopefully I haven’t wasted your time with this video” near the end. NO it was not a waste of time, actually this was the most informative exciting tutorial I have ever seen, with some of the best footage showing the difference between tools, in the most understandable explanation I have had the pleasure of watching! Seriously, thank you so very much. I feel the need to go practice and follow this example step by step repeatedly and emblazon this into my thick skull! I want crisper beads dang it! I will give you some feedback on turning small beads with the Master Spindle. Scott

@tomislavtomasicwoodturning 3 месяца назад

Thank you Scott for this kind feedback and support.... Please do try spindle master and let me know how it works for you

@valeriehenschel1590 3 месяца назад

Far from a waste of time. Finally learned good ways to use that Spindlemaster in my tool collection!

@terrywells3809 3 месяца назад

Great video! thank you

@jamieemes4292 3 месяца назад

Always appreciate your videos! I am in awe of your ability with skew. I believe it is one of the most versatile lathe tools, but haven't been able to master. Are there any particular videos you might find the MOST helpful for learning the skew?

@tomislavtomasicwoodturning 3 месяца назад

I have a video,few weeks old, two part ,first is on shapeing and angles for skew and second part is on using skew and how to make a lot of catches 😅. Also Richard Raffan has several videos on skew

@markduggan3451 3 месяца назад

There all great when used by someone like you.

@tomislavtomasicwoodturning 3 месяца назад

Thank you sir

@gregdownunderinOz 3 месяца назад

Great video tommi. Well explained as always. If the skew is the best for doing this work and you can use it competently, why would you want to use another tool? I appreciate the fact the skew chgouge, doesn’t catch as easily and certainly is good for people to learn how to use skew better. Why would you continue to use it rather than skew when competency of skew is achieved? Thanks for sharing. All the best to you and your family tommi from down under in Oz.

@tomislavtomasicwoodturning 3 месяца назад

Thank you sir, wish you and your family are well? Its good question, I just enjoy using skew/gouge, the ease of working with it is second to none.... But its not the best tool for every task.... Now I know few production turners who use something similar as well, they know how to use skew but they just enjoy using other tool for the job.... Thank you very much for watching and support what I do 🤗

@user-ff3uw5el9w 3 месяца назад

Fabulous informative video Tomislav!!😊

@tomislavtomasicwoodturning 3 месяца назад

Thank you very much 🤗

@coolcat9327 3 месяца назад

A Sorby spindle master has a highly polished bevel that burnishes the cut. It is excellent on soft woods but struggles on harder woods wanting to slip off the bevel, it must be hand sharpened on a stone or diamond card, you never grind the bevel. Thank you for sharing this. I am interested in the spindle gouge and will probably make one.

@coolcat9327 3 месяца назад

I ment I will make a skew gouge.

@tomislavtomasicwoodturning 3 месяца назад

Thank You for watching 🤗

@stevenhansen8641 3 месяца назад

🕶thanks Tomislav

@geofftidy8745 3 месяца назад

Great video. My trouble is that I want to buy each of the “new” tools you demonstrate.

@tomislavtomasicwoodturning 3 месяца назад

Ohh , hopefully you won't get in throuble with better half, 😀 thank you very much for watching

@geofftidy8745 3 месяца назад

@@tomislavtomasicwoodturning I try to keep it a secret but she usually finds out🤣🤣

@randycosgrove3608 3 месяца назад

Thanks again for a very informative video. The more I learn, the more I find out I need to learn. I have a Sorby 1/2" round nose scraper that I never use. Just not for the kind of turning I do. I'm now thinking about re-shaping it into something similar to your slightly hollowed tool. Is there any reason that I'm not aware of to not do that??

@tomislavtomasicwoodturning 3 месяца назад

Hi Randy,as always thank you for watching.... Try using it without hollow on top, if you find it works for you, you can always add hollow later, in terms of how to use the tool, they are both the same only different is that with hollow its just ever so slighty easier to push through wood

@jrk1666 3 месяца назад

with some of the very soft wood here in my region of Brazil I had better luck using a skew with a very extreme angle, almost 20 degrees sharpened to 40, very similar to what some eastern turners use

@tomislavtomasicwoodturning 3 месяца назад

Indeed, I would also sharpen to very long bevel if I had more of that kind of wood to turn,in like series.... But this angle on skew works great for me on soft and hardwoods☺️

@jamesbudai8966 3 месяца назад

I really enjoy watching your videos. I feel that I am getting to be a much better turner with these instructional videos. Thank you for taking the time to teach me and all your other viewers.

@krperry2007 3 месяца назад

These don’t have a burr, correct?

@tomislavtomasicwoodturning 3 месяца назад

Thats correct sir

@scottstubberud1137 3 месяца назад

I have not watched the video yet totally but I wanted to comment that my Sorby Master Spindle does NOT have a flat bottom at all. It is rounded completely, not a small radius but larger and its total thickness is 3/16” and it is 1/2” wide. The arc of the bottom is a continuous curve making it seem like a very thin tool overall. It is a curve much like the flute of a spindle gouge just on bottom. I purchased it a few months ago as a Sorby Master Spindle and has the Sorby name and Sheffield England etched on the top of the metal. It is very unusual compared to most other conventional tools. I wonder what the difference between yours and mine is? I don’t think yours is the actual Master Spindle, forgive me if I’m wrong. The bevel grind looks similar but the bottom is completely different. I will now watch the video and save further comment for later.

@scottstubberud1137 3 месяца назад

You mentioned at one point it was your version of the Sorby Master Spindle. That clears up the mystery! I am going to go through the same process you did with my skew, detail spindle, regular spindle, and the Sorby Master Spindle. I have been using the detail spindle for smaller beads and I am pretty proficient with it but you showing how it scrapes the flute side (outside) of the bead totally makes sense and I am anxious to try the flat top master spindle for this. I can cut decent beads with the skew but I just am not as comfortable with it. Something in between skew and spindle gouge looks like it might be ideal. This is one of the best tutorials I have ever seen before! No joke! Amazing stuff and I thank you!! Scott

@tomislavtomasicwoodturning 3 месяца назад

Hi Scott, thank you very much for kind words and support 🤗 Not sure ,maybe I said it wrong in video, what I ment was the sorby spindle master has flat top,much like standard scrapers, the bottom is rounded over, but the top is flat.... On my version or Del Stubbs its flat bottom with rounded edges and top has a slight hollow, less then detail gouge.... Hopefully that makes sense, I do have a few weeks old video little more in depth on this tool and its maybe more visible on that hollow top☺️ Sorby spindle master is pretty much the same as this Skew gouge but just a fraction more effort to go through wood.... But works the same and finish is the same.... Thank you once again 🤗