Domino Sled Intro with Lukas

Подписаться 55 тыс.

Просмотров 6 тыс.

50% 1

#fixwhatbugsyou #stopthestruggle #fastcap #fastcapproducts #developedbyacabinetmaker #dominosled
Product Link: www.fastcap.co...
The Domino Sled provides consistent, fast easy, repeatable measurements for cutting joinery holes with a Festool DF 500 Q-set Domino Joiner.
If you like this video, give it a thumbs up & subscribe to our channel.
Paul Akers is the founder and president of FastCap, based in Ferndale, WA. FastCap is an international product development company founded in 1997 with over 2000 distributors worldwide. A prolific inventor, Paul holds many US and international patents. FastCap launches 30+ innovative products per year and has won Business of the Year multiple times. Paul and his wife, Leanne, have built FastCap from their garage into a multi-million dollar company. At its core, FastCap is a lean manufacturing company, determined to continuously improve everything, every day. Our products reflect the idea that everything can be improved and the best ideas come from the shop floor.
For more information on FastCap, visit our website www.fastcap.com/ or blog blog.fastcap.com/ For Spanish videos, visit our FastCap Spanish RU-vid Channel. www.youtube.co....
Paul Akers is an entrepreneur, business owner, author, speaker, & Lean maniac. He has written 5 books on Lean (2 Second Lean, Lean Health, Lean Travel, Lean Life, & Banish Sloppiness) and he travels the world to educate & speak about 2 Second Lean, Lean principles, & Lean manufacturing. Paul has a podcast called The American Innovator where he shares his Lean travel adventures. For more information on Paul Akers and Lean, visit his website. paulakers.net/
To receive news regarding FastCap, 2 Second Lean, and The American Innovator podcast, go to this link: bit.ly/FastCap-...

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@JScottAudio 9 месяцев назад

By the time he finished his greetings/ introduction, I would have made all 4 cuts using the fences supplied with the Festool system. Seems like a lot of work and hardware to solve a problem that 95% of the time, doesnt exist.

@MattLitkeRacing 9 месяцев назад

The application you show is easy enough with the built in settings on the tool. Where this would be useful is with a long run instead of the cross stops. Or when making a plunge in the middle of a panel. You could add a rail square and parallel guides to make repeatable cuts for a shelf or divider

@MattLitkeRacing 9 месяцев назад

Also it would be better if those stops had a ball detent. Make it so you can move from stop to stop while keeping two hands on the machine

@coolbugfacts1234 9 месяцев назад

You don't need any fancy jigs for mid panel dominos for a fixed shelf, it's very easy. You strike a line where you want your shelf, clamp the shelf flat down to the side along the line, then plunge using the sole of the machine as the reference into the side and shelf.

@MattLitkeRacing 9 месяцев назад

@@coolbugfacts1234 yes I’ve been to 3 of Sedge’s training classes when they still had them. I understand what is possible with that machine

@bombamanwa 9 месяцев назад

You need to go back to the drawingboard on this one boys

@RossWilliamsDC 9 месяцев назад

How to complicate an easy operation.

@coolbugfacts1234 9 месяцев назад

This seems like a lot of work to replicate what the machine already does with the flaps. And you don't need to do every mortise on the tight setting, one per joint is almost always enough, just to keep it aligned.

@WasimBarri 8 месяцев назад

An awkward solution to a problem that can be solved in much simpler ways.

@TreeOfLifeWoodworking 28 дней назад

The obvious issue with this is the guide rail wobbles all around you have nothing keeping it locked in place. I saw it move several times just during the demo. Make an alignment stop for that... and you have a better product

@DK-lz7kg 9 месяцев назад

Fastcap, please start using clip on mics during presentations. I know it’s “lean” to just film and post from a phone, but it’s not value to the end user when the audio is bad. They make simple iPhone compatible mics without any additional work other than plugging it into the phone.

@lukasholland6864 9 месяцев назад

actually used one on this video. Might try a different brand of clip on mic. Thank you

@crownstopfence5841 9 месяцев назад

Wow!! Looks very accurate. Another great tool from you guys !!

@greysondarrow3095 4 месяца назад

On the face cuts, between the track thickness and the 5mm (jig) plate thickness you lose a lot of depth of cut. What is the saluting for that?

@FastCapLLC 4 месяца назад

@greysondarrow3095 Thanks for your patience! We reached out to Lukas, here is his response: You lose 10mm between the fence and the slide. So say you are using a 40mm Tennon you could set your depth to 25, and your face cut hole would be 15, side cut 25, and it would fit a 40 perfectly. Please let us know if you have any other questions.

@Tech-3D 9 месяцев назад

Unhelpful, complicated to use and slowing down work with the otherwise well designed Domino workflow

@-PORK-CHOP- 2 месяца назад

Yeah Nah too much play and plastic clip look like they will break easily, how do I use the Domino without it ?, same way I am using it currently, don't need this complicated gadget.

@trev2417 8 месяцев назад

You never mentioned securing or even lining up the fence to board being machined???

@LB75Player 5 месяцев назад

Way too much flex going on for that to be accurate.

@tpaulfelder1 8 месяцев назад

a lot of fafing about and what forr?

@harveysmith100 9 месяцев назад

Had to stop watching due to terrible sound quality. Did no one watch this before sending it out. Really hard to understand what he was saying. Painful to listen to