Donaldson P577066 Oil Filter vs. Baldwin B7449 Oil Filter Cut Open Comparison

Подписаться 22 тыс.

Просмотров 6 тыс.

50% 1

Oil Filter Inspection.
Today we'll compare a Donalson oil filter to a Baldwin oil filter. Are these oil filters any good? Would you use them? Let's open them up and see what's inside!
Donaldson P577066 oil filter: www.dieselequipmentinc.com/pr...
Baldwin B7449 oil filter: www.zoro.com/baldwin-filters-...
Welcome!
► Want to become part of a Great Story? Please consider donating to this Great Organization. Thank You and God Bless! www.shrinershospitalsforchild...
► Music: www.bensound.com/
pixabay.com/music/
► Hope you like the video, Please don't forget to Like,👍 Subscribe, and Hit the Bell 🔔 to See Future Videos. Thanks for Watching 👀, and Keep on Wrenching 🔧. Take Care!
► Subscribe: / whipcitywrencher
► Follow on Facebook: Whipcitywren...
►Disclaimer: This video is for entertainment purposes only. Any information and content contained in this video are for entertainment purposes only. I ( WhipCityWrencher) shall not be liable for any injury, damage, loss, or even death to any person or property resulting from watching this video. Duplicating anything in this video is doing so at your own risk. Fram,
auto repair,
12-volt battery,
starter,
alternator,
radiator,
air condition,
tires,
wheels,
brakes,
rotors,
grille,
headlights,
blinkers,
hood,
Bondo,
fiberglass,
odometer,
mpg,
engine,
motor,
transmission,
transfer case,
oil,
fuel,
gas,
Chevy,
ford,
Chrysler,
truck,
car,
vehicle,
spark plug,
sensor,
antifreeze,
wipers,
bumper,
oil filter,
fuel filter,
welding,
welder,
tools,
tool,
harbor freight,
Walmart,
AutoZone,
advance auto parts,
rock auto,
Nissan,
Saturn,
Ford,
gear oil,
rear differential,
front differential,

Авто/Мото

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@WhipCityWrencher Год назад

► Thanks For Watching! and Watch an oil filter inspection video every Friday on this RU-vid Channel, Thank You!

@Antiliblife187 Год назад

Both companies are well known in the diesel industry for making quality filters. Both American made🇺🇸 I wouldn't hesitate to use either filter, but I like the thicker can and the coil spring on the Baldwin. Would be better if they had metal crimped seams instead of glued seams.

@mikejp9393 8 месяцев назад

Baldwin has filters from China as well.

@mimelio Год назад

2 good filters.. I have used Baldwin/Hastings for year with out a problem.

@mikeneumann4660 6 месяцев назад

I like the Donaldson a little bit better I like the larger diameter of the filter, seem like the fleet under the microscope was also a little bit finer.

@martinschulz9381 7 месяцев назад

Can't go wrong with either one. Working in the field for many years, I noticed that Baldwin seems to be the standard with rental companies. (oil, fuel, air) Farmers love therm too. Good video.

@WhipCityWrencher 7 месяцев назад

Thank You👍

@freedomliberty7611 Год назад

Great job Pete!

@WhipCityWrencher Год назад

Thanks, Dwayne!

@SimpleTastyFood2024 Год назад

Both seem to be good filters! Very good comparison! Have an awesome weekend Pete! Merri :)

@WhipCityWrencher Год назад

Thanks, Merri! Have a great weekend also!😊

@Gary7even Год назад

Baldwin would be my choice. I ran Baldwin filters back in the 70s and 80s.

@drumtwo4seven Год назад

I'd go with Baldwin it just seems cleaner overall... Donaldson had the silicone ADBV but the Baldwin looks good as well. The overall fit and finish leaned me towards the Baldwin on this one. Interesting review 👍

@WhipCityWrencher Год назад

Thanks, drum!

@nadineherrell5426 Год назад

Good show. Well done. Michael Herrell

@WhipCityWrencher Год назад

Thanks, Michael.

@jamescaron6465 Год назад

Nice job, Pete, both look like really nice filters and if I were running a diesel, usually the rubber anti-drain back valve isn’t that big a deal because they usually hang straight down vertically. I’d use either one

@WhipCityWrencher Год назад

Thanks, Jim!

@ellalamont6943 Год назад

They must be great filters if you say so. You're very knowledgeable when it comes to analyzing them.Thanks for another nice comparison! Take Care, Cuz! 👍

@WhipCityWrencher Год назад

Thanks, Ella Have a Great weekend, Cuz!😊

@ellalamont6943 Год назад

@@WhipCityWrencher Thanks! 👍😊

@lukesm5747 Год назад

G'day Whip.Awesome video as usual.I would not hesitate to use either of these filters however i be more inclined to run the Baldwin because it ticked more boxes.But I would'nt run extended oil change intervals because of the nitrile adbv. Cheers from Downunder!

@WhipCityWrencher Год назад

Thank You, Luke! Cheers!😊

@faxmen09 Год назад

Donaldson appears to be made by M&H Wix-Purolator. The tapping plate is Wix type, the internals/element classic Purolator design. What can be seen is what newer Wix now will look like, thanks to M&H. Wish the efficiency stated at 20um with ISO spec. The Baldwin looks ok, though in general they are not noted for being particularly efficient. In my experience, also they are not a readily available filter brand. Prefer the silicon adbv on Donaldson and because of that give it the edge here. Stamped spring doesn't bother me in the least. But, as I don't own a diesel, wouldn't be looking for either filter. Even if I did doubtful go out my way for either. One thing I do like about both filters, made in the US.👍 Thanks for vid.

@WhipCityWrencher Год назад

You're Welcome, faxmen09!

@PapiDoesIt Год назад

I'm using Donaldson because I got a good deal on them, but I'd be confident using either one.

@jonathannance5086 Год назад

Thanks, Pete Both are serviceable American made filters.

@WhipCityWrencher Год назад

You're Welcome, Jonathan.

@psody4463 Год назад

Another Great Video Pete! Thank you. I've actually just chose to use that Baldwin B7449 in our Silverado after seeing your video on 1/6 with the Napa Gold and Napa Proformer 2100255/100255. Napa finally has the Platinum filter 4100255 back in stock after over a year of being out of stock. I may pick one up and see if it's the same as before....or since they are made by WIX, I'm wondering if they re-tooled the Napa Platinum and if it's going to be nearly same as the O'reilly's Microguard Select 100255 that's now made in Vietnam. I believe WIX/M&H make most of the Napa and Microguard filters at this time.

@WhipCityWrencher Год назад

You're Welcome, Paul!

@TomTom-io8lc 11 месяцев назад

I'm having this struggle finding a filter for my 2020 Silverado. It has a pf63e with 22 psi bypass, the replacement pf63 only has 12, so im struggling to find a oil filter , considering selling a truck with only 14k miles, over a discontinued oil filter,

@DarrenShaw-ev5tb Год назад

Working for GRAINGER - sold Baldwin ( industrial ) Fram ( automotive ) Givin my druthers tho - would use Kralinator if they were still around

@daewooparts Год назад

They both decent filters if you change your oil on normal intervals, wouldn't use them for those extended oil changes

@mphilleo Год назад

Thanks for doing this comparison, Whip! I've been looking forward to it since you mentioned it in December. To be honest, I'm a little disappointed that the Donaldson doesn't have a crimped end in the media, but I do like it's thickness. I tried to back figure the efficiency based on their numbers and I think it equates to about 95% or a little better at 25u. Obviously, I do like the silicone ADBV, but I was surprised to see it has M&H construction and a thinner can. I was debating between this Donaldson and a PureOne and went with the Donaldson assuming it had superior construction, even though it cost more. Do you feel there is an edge in materials or build quality between the two? The last thing I noticed is that the louvers seem to be mirror opposites on each of the metal cores. Interesting. Now, I know I'm just asking your opinion, but do you believe the Donaldson is suitable for a annual oil change interval with about 3,000 miles? I'm glad to see it has extra pleating, and I think with the silicone ADBV, it's probably fine. I'm also curious if you ever seen any major issues with filters with this kind of construction that you've cut open? Thanks again for the awesome content!

@WhipCityWrencher Год назад

You're Welcome, John. This Donaldson should have no problems doing 3K miles, it certainly resembles the Purolator One. I'll have to do a comparison someday. Thanks!

@budblack3588 Год назад

the Donaldson looks like it was made by Purolator as a Purolator bypass and anti-drain-back valve and a slotted center core, I suspect that this was subcontracted to Purolator, and yes I almost forgot the glue everywhere, I choose the Baldwin because it is clean.

@WhipCityWrencher Год назад

Hi, bud Yep, it looks a lot like a Purolator One.

@AJmx2702001 Год назад

Is Donaldson p series I've noticed before like that one that they are not truly a Donaldson. Since it's a white filter, that's usually a giveaway. You should try a blue one sometime. But at least the Baldwin is its own still. Something to be said of Baldwin. My oldest operating piece of equipment on the farm at 68 years old uses Baldwin from the day it was new thanks for sharing. Enjoyed it much

@faxmen09 Год назад

AJ the top of the line Donaldson made filter is full synthetic media filter. Topic Donaldson is not that. Most likely topic filter made by M&H Wix/Purolator.

@WhipCityWrencher Год назад

You're Welcome, AJ!

@frederickbooth7970 Год назад

We use Baldwin on our technically antique Ford 8N`s of which we have 3. 2 with loaders that are hydraulic controlled. We have never had a problem with filtration & during winter our loader tractors have severe short trip operating cycles when cleaning stalls in our barn. Always enjoy & interesting to see the many types of filters you cut open & analyze. We change oil & filters at 100 hour intervals as well as the filters too. We buy the Baldwins by the case along with AC Delco filters for the 1970 C10 & the 1984 & 1989 S10 trucks.

@jeffkortsch8276 Год назад

An interesting comparison of two similarly priced filters. Based on the media rating and the coil spring (over the stamped leaf retainer spring), I would take the Baldwin. If they spent the extra $ and put in a silicone anti-drain back valve, it would definitely be the Baldwin.

@channel_saigon Год назад

Very nice video good morning 223

@WhipCityWrencher Год назад

Good morning👍

@Lsgriff Год назад

I’m torn, not sure which to use on my powerstroke or should I go with the new motorcraft 2124 that replaces the 2051S….decisions are hard

@WhipCityWrencher Год назад

On Friday, April 7th, I have a Purolator Boss PBL14459 vs. the Motorcraft 2124S video.

@RicArmstrong Год назад

Hey Whipcity, how do I send you a couple filters to test?

@WhipCityWrencher Год назад

email sent

@vincemajestyk9497 Год назад

I think they're both in the same league with minor differences. I believe you're right they both look like cellulose. I bought a case of Baldwin's about 8 years ago and am down to my last 2. I probably wouldn't hunt down either of those specifically because of the conventional media, but I wouldn't 'not' use them either. They're both good quality. I used both brands on my diesels quite a few years ago for lube and fuel filters. Baldwin hasn't seemed to adopt much new 'tech' in their filters though.

@WhipCityWrencher Год назад

Hi Vince, Thanks for Sharing!

@RRaucina 10 месяцев назад

Likely made in the same factory

@RRaucina 10 месяцев назад

The last 4 filters I got that were Donaldson were made in Saudi Arabia. These were ford backhoe filters. Strange.

@WhipCityWrencher 10 месяцев назад

Wow, I don't think I ever seen one made in Saudi Arabia

@RRaucina 10 месяцев назад

Fuel and air. SA is trying to rise above oil only as income. @@WhipCityWrencher

@linctexpilot8337 2 месяца назад

Saudi Arabia has filter factories ?!?!?!??

@RRaucina 2 месяца назад

@@linctexpilot8337 Pretty bizarre indeed! Those billionaire turban heads are diversifying for the day the oil runs out.

@bigjim5551212 Год назад

well, not much difference. Donaldson is leader in filtration for heavy duty. I would take Donaldson

@sremu Год назад

The Donaldson looks like a Purolator….

@nodoubt46able Год назад

watched you harbor freight torque wrench video...good way to crack your rims...your impact tightened them over the 100 you set the wrench at...when you went back they all clicked at 100 lbs easy, without moving....how do you know how much over your impact wrench tightened them man? they could of been pushing 200 pounds for all you know ! should of LIGHTLY tightened them with that impact, then come back with the calibrated hf torque wrench and snugged them to 100 pf lbs.... you kinda did that very back wards...just saying.... might save somebody a cracked rim if they know the right way to do it.....

@WhipCityWrencher Год назад

I didn't tighten them that much with the corded tool as I stopped shortly after the lug nut tightened up. But I can see how someone who doesn't know what they are doing might hold the tool on there for an extended time and over-tighten so I took the video down.