welcome to the channel. I hope you enjoy this little 1/24 scale drift edit. Better and more drift footage coming soon. Check out rcsupremacy.com/ for all your micro rc car needs. Thanks for watching!
Are there grippier drift tire options in 1/24 like the old school hard rubbers for 1/10, or is all 1/24 drifting relegated to rear motor, 60 to 70% rear weight bias, ultra-low-grip setups?
Thank you 🤘. The body is a 1/24 fugimi 180sx with the eternity hobby shop bnsports widebody kit. I belive this one is 110mm as well. You should be good.
I’m building a da3 chassis right now; it’s my first 1/24 drift build; what kind of wheels do you use on these things. The fronts on the s13 look like Aoshima longchamps I have lying around for model kits
Awesome. That's a great chassis to get started with 🤘 the wheels they run are the mini-z awd type wheels. The rwd type have a different hub and do not bolt up. I'm running the kyosho te37 from route66 on the front and back. The offset and if they are wide or thin will depend on the setup your running ect. Some of the Chinese wheels are 20mm and 22mm. I prefer the 20mm as they are more scale looking. For tires i would use dsracing. Check out rcsupremacy.com they have a great selection of wheels and tires.
Your welcome. I'm glad to see more of us 10th scale guys getting into the 24th scale chassis. The potential is definitely there in the little chassis and electronics now to get some good tandems and consistency
Hey guys Me and a few guys are looking to get into the 1/24 drifters and we are purchasing the xrx ARTR just wondering what are some of the must haves to make it killer like chassis and big offset wheels and weights?
Thanks for watching. I see you've watched the xrx one year review video as well. The parts I mention in that video should be a good starting point to get the xrx dialed in.
Thanks bud 🤘 I'm using a 2s 200mah - 450mah depending on which car body I'm running. 300mah seems to be a good all around size and good driving times around 45mins.
I use a brand named Bias, with the 3 different plugs to give me power options for multiple esc plugs and power for the lights. I belive their on Amazon And ebay.
For the esc and motor? Running the xrx sensorless brushless esc and 3500kv motor. I did Increase the pinion size to a 19 tooth to get a little more wheel spin at top end. Seems to be a really good final drive.