Double Down on Your TIG Welding Skills | Two TIG Root Techniques!
TIG welding a root while holding the filler wire at the top and the bottom of the bevel is a technique that can provide improved weld quality and control. In these two techniques, the filler wire is held at the top and the bottom of the bevel and fed into the weld pool as the torch moves along the joint.
To perform these techniques, you will need to establish the proper arc length between the tungsten electrode and the workpiece. The filler wire should be held at a 10-degree angle to the joint and fed into the weld pool as the torch moves along the joint.
It is important to maintain a consistent travel speed and maintain proper torch angle and distance throughout the weld.
With practice and attention to detail, this technique can produce high-quality welds with excellent control and precision.
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
My videos are recorded at working sites in various locations and welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe, and click the bell.
It doesn’t cost you anything but massively helps my RU-vid channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
/ x3mtig
26 авг 2024