Dual Lock 3M - The best way to attach pedals to your pedalboard 

I've been wanting a pedalboard for quite some time now, but kept putting off obtaining one because of the same Velcro problem. However, soon after viewing your video I happily bought some Dual Lock and a PT Pro. Thanks bro.:)

This is the exact product I needed for my pedalboard. I just ordered a roll. Thanks for sharing your knowledge. It was invaluable.

You sold me on it! I'm building my first board, which is literally a wood board right now.

"If you want to pull this thing apart, good luck" *Pulls it apart* LOL

That is really cool gear 3M company is well known in the UK I'm about to buy a pedal board and this will work just fine on it ,thank you very much for this Demo

Thanks for the review. I'm gonna buy a 10ft roll for me first pedalboard build, within this week. 🤘🏽

Great video and great advice! I always buy used and pre-dinged. Saves me the heartache later. :)

I think the guys at That Pedal Show talked about a product similar to this (If not the exact product). But I'm pretty sure their pro tip for installing was for the piece that goes on the pedal cut it into a triangle with the one point facing the edge. So it maintains its strength on the board, but when you take off pull from the end and it will come off easier. If that makes sense!

All the info I needed. Thanks!!!

I heard about this but thanks a lot for the demo!

Thank you for the great video I subscribed to your channel because I am learning a lot from you. I have been thinking about duel lock for some time , I have limited studio space so I think this will come in handy fastening pedals and my audio interface to the bottom of my recording desk.

Awesome stuff great video I'm definitely getting a roll for my new pedalboard

I’m gonna give the 3m dual lock a go. The problem with my current 3m Velcro is that the adhesive on the Velcro sticks to the pedal and comes away from the velcro.

this stuff definitely locks together well. but the problem I had when I used this stuff a few years ago, was that the sticky part that goes on the surface comes off. I'd put pedal on the board and it could easily be pulled off (or even sometimes just fell off) because it the hold was so strong that it just ripped off the board completely

Great video. Enjoying your channel. Nice tips and useful information. How are you enjoying your Polytune 3 ? I Subscribed.

Very good!

When I tried using the Velcro on the back of my pedals and then try to pull the pedal off it stuck to the metallic sticker on the back of the pedal and it separated from the pedal and it stuck to the board. It had pulled off the back of the pedal. Do I need to pull off the rubber backing on the pedals first? I have Donner's mini-pedals.

Thanks, just bought it on Amazon.

Hey, great video! Anyone have suggestions for getting the old Velcro adhesive/glue off of the pedaltrain metal bars?

Dual Lock is the best 💯%!

hi, cool video. could you tell me te model, measures and how many pedals can you put on this pedaltrain, thank you

My issue is not that Velcro isn’t strong enough, it’s the strength of the glue. My pedals are stored in an upright position when on the board in its flight case. Eventually they all fall off and move about. Is this tape any better at solving that problem?

thank you mate

what number of 3M dual lock is this please?

Excellent, many thanks! They have it here in the UK on Amazon.co.uk. Please clarify though, how do you make an angle to remove a pedal? Thanks.

Thanks much!

Thanks

I'm very new to pedalboard stuff, so how do i attach the dual lock stuff to my pedalboard and pedals? just glue?

Do you have to take the rubber feet off of your pedals to use this? Thanks!

“If you wanna pull this thing apart, good luck” proceeds to pull it apart 😂😂

Actually the best way to mount your pedals is to take the pedals backplate off and place a Velcro strip like a long one not too long but long enough to where there they are sticking out the sides and then screw the backplate back in and what that does is it sandwiches the Velcro so it doesn't come off then just strap it to ur board I use a kobolt shelf from lowes it's nice

There's a few different strengths of dual-lock. Which one did you use?

Just bought 1. Ain’t cheap.

Hey. I am planning to build my pedalboard and this video really gave me a nice tip on the road to perfection. What I would like to share with you is some MOOER INTERPLUGS. Instead of using patch cables, those are like patch cables, but there is not cable, there are just two heads so that you can connect the pedals very close and save space. Do you know them? Please check them out and share your opinion with me. For other patch cable that require some distance, I plan to buy Mogami bulk cable and some Switchcraft Pancake plugs. How about that?

I've used this stuff before on my pedal board and I can honestly say it's an absolute nightmare to get your pedals off the pedal board again once they're on. I would not recommend this product just go with something like heavy-duty velcro. maybe it would be slightly different for you because your pedalboard has a gap to help you push the back of the pedal but I was using a flat pedal board at the time.

All velcro sucks due to the glue adhesive on the back losing it's grip on the pedal. I need a locking clamp that fastens any pedal to the board.

It's not like velcro at all. Velcro is hook and loop with a soft side and hard side. This is hard on both sides with mushroom heads that lock together.

This is 3m Dual Lock. It’s not “industrial strength Velcro”. Velcro is a brand. The “Velcro” spoken of here is Velcro brand hook and loop. However I definitely agree that dual lock is the only way to go...

Is this the 250 or are you using the 400?

this guy told jim off for !@#$% an american pie !!!

Bono and Leonard Hofstadter s son!

How tf do you take it apart? Fucker is stronger than the 3m double sided backing