Тёмный

Duramax HSP Cold Air Intake Full Review and Install 

Southern Silverado
Подписаться 2,4 тыс.
Просмотров 26 тыс.
50% 1

Опубликовано:

 

22 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 27   
@mrmotofy
@mrmotofy 3 года назад
Just some info if you're doing this Most of those vids you see, are older models the, LMM have all kinds of stuff in the way. The coolant line in back to heater core is 5/8" ID and can be a Gates 18743 U formed The coolant line down there is 1/2" ID and a Gates 28460 is a formed 90 deg for about $9 on Amazon. I used 5/16' fuel line also but the sharp bends kinked the hose. So as a good recycler I found an aluminum pipe that was attached to something that fell off under the truck one day. It's a 5/16" OD pipe so a little pipe bender and trim to length and slide into hoses keep em from kinking Y bridge bolts are M6-1.0x25mm flange bolt. I always like to upgrade to Grade 8 when possible The Turbo is simpler with a 6 pt 17mm swivel/flex socket from a kit in stock at Autozone #62-850 $20ish. The Ybridge bolts are easier with a 1/4dr flex extension in a 2pc kit at Oreilly's
@thomasvizcainco5658
@thomasvizcainco5658 3 года назад
Awesome 👏 video thank you. Learned a lot from it.
@recklessclan4078
@recklessclan4078 3 года назад
Dude put the pipe on backwards... maf connector should be on the outside, and a lot closer to the filter or reservoir. 😂
@MGMCLL
@MGMCLL 3 года назад
🤣 he did
@XxBigDAWG22xX
@XxBigDAWG22xX 2 года назад
@@MGMCLL I was laughing the entire video because who the hell puts it on backwards and 2 why buy a fleece cheetah but not the entire hsp kit. Like sorry but if your gonna do it atleast do it right in my book. When I pull my truck part I spend 5-7k on parts. Because a I’m not doing it again unless completely necessary because I need my truck for work. It’s was probably the funniest truck video I’ve watched
@kylepeters6297
@kylepeters6297 4 года назад
Do u have to tune the truck if u install the HSP intake? Also will it help with performance and sound if all I have on my truck a exhaust and downpipe?
@truereality5873
@truereality5873 2 года назад
No you don’t need to tune a truck just because you add an intake. Only adding more air.
@ericmartinez5633
@ericmartinez5633 2 года назад
@@truereality5873 yes you need to calibrate the maf sensor if its a bigger diameter tube or if the maf sensor is in a different location( like on a bend or something) causing a different amount of air flo. if you go from a stock 4inch to a 5inch intake you need to tune the maf.
@mk7_nate970
@mk7_nate970 2 года назад
@@ericmartinez5633 so I will need a custom tune to put this on my lly ?
@ericmartinez5633
@ericmartinez5633 2 года назад
@@mk7_nate970 i believe if its over 4inches. so a 5inch more than likey need to remap the maf
@mk7_nate970
@mk7_nate970 2 года назад
@@ericmartinez5633 the pipe is 4 and also how do you remap the maf
@justusone1
@justusone1 4 года назад
I cut mine off very quickly
@Shad0wC0mpany2
@Shad0wC0mpany2 6 лет назад
What’s the color you chose again and please tell me the part number and measurements on that filter?
@Jakeyshakey
@Jakeyshakey 5 лет назад
Christopher Robin candy blue.
@misterepicdanbros2933
@misterepicdanbros2933 6 лет назад
Do a sound video plz! How do you like it?
@davelosonczy1537
@davelosonczy1537 3 года назад
You have to get rid of the your EGR
@recklessclan4078
@recklessclan4078 3 года назад
Actually no, you don’t have to with this intake. Just install it properly with the maf sensor facing the correct direction 😂
@fivenine1057
@fivenine1057 Год назад
@@recklessclan4078 You're right, he doesn't have to. But its fucking stupid to leave it on like he does in this video. Not how its intended to be installed, hence the rubbing.
@wcfishing7604
@wcfishing7604 6 лет назад
Just slide the clamp over so it doesn't rub the boot.
@cridley2010
@cridley2010 5 лет назад
Delete the egr
@XxBigDAWG22xX
@XxBigDAWG22xX 2 года назад
@@cridley2010 egr is deleted in the video but what dumbass doesn’t buy the whole kit. He has spent money on a fleece turbo but hasn’t done the extra modifications to let it actually work like it should. 😂
@juanvasquez8446
@juanvasquez8446 5 лет назад
Did you choose the PCV reroute add on option with HSP upon order or no?
@pwids3
@pwids3 3 года назад
What’d you use for the rubber lines etc?
@trevorschlise1775
@trevorschlise1775 5 лет назад
Mean does not have that problem at all
@vegastyle84
@vegastyle84 5 лет назад
The hell you need all that power for?
@Chevyfan-tl2kw
@Chevyfan-tl2kw 5 лет назад
Kinda question is that? Why you on this channel??
Далее
Are Aftermarket Intakes Even Worth It?
10:17
Просмотров 8 млн
Do Performance Air Filters Actually Work?
13:24
Просмотров 6 млн
Every Duramax Owner Needs These HSP Parts!
10:03
Просмотров 62 тыс.
2011-2016 LML Duramax 4" Intake with Air Box Stage 2
4:26
LLY duramax HSP Y Bridge Install
15:16
Просмотров 27 тыс.
2006 GMC Duramax Y Bridge Install
14:58
Просмотров 32 тыс.