No video :(

Dynamic Autowerx Flow Max N54 Twin Turbo Install Overview - E92 335i

Подписаться 6 тыс.

Просмотров 13 тыс.

50% 1

This is NOT a complete step by step DIY, I wish I could've made one but complications set me back. This video still shows you most of the steps to install N54 turbos, and highlights the nuances with Dynamic Autowerx turbos! Stay tuned for a lot of content with these turbos.
Support the channel and buy STA Industries merch! sta-industries.com
Below are all the links you'll need, including an affiliate link! Full disclosure, if you do purchase the turbos through this link I will get a small cut, which will help me out a ton and go towards more modifications for the car!
Buy your DAW turbos, installation kit, and relocated inlets here: www.bimmernetw...
Great Step by step install video by Vehicular DIY: • Change Your Turbos At ...
Oil Feed Lines
Front: www.fcpeuro.co...
Rear: www.fcpeuro.co...
Oil Drain Lines
Front: www.fcpeuro.co...
Rear: www.fcpeuro.co...
Coolant Feed Lines
Front: www.fcpeuro.co...
Rear: www.fcpeuro.co...
Coolant Drain Lines
Front: www.fcpeuro.co...
Rear: www.fcpeuro.co...
As you saw in the video, I did struggle quite a bit with the VRSF relocated inlets, specifically with relocating the coolant expansion tanks. While I was able to make all of it work, things just didn't fit as expected and the quality of parts provided wasn't the greatest. I can't recommend it personally, but the ARM kit for sale may potentially be better.
My Gear!
Sony a6300 Camera: (here's the better and cheaper a6400) amzn.to/3dQQz3s
GoPro Hero 7 Black: amzn.to/3uGSsGb
DJI Mavic Air: amzn.to/3pUXZVY
Moukey Mic: amzn.to/3dM6mjY

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@AXRBiKeCoMpAnY Год назад

Sam, you did a great job on the install video. Hope the DAW's are doing great for you.

@SamAbraham Год назад

Lovin em! Unfortunately I blew an axle a couple weeks ago due to the torque they produce down low combined with me being an idiot hahaha. M3 rear subframe swap coming soon to the channel

@ahw5hcgfyj 2 года назад

I got rid of that trash vrsf relocation kit for the same reason. Super janky, had to modify most of the parts on the kit and it still fit really poorly. Contacted them about it and they just sent me a photo taken from MMPs website lol. Super happy with the turner kit, just don't order it from Turner/ECS because you'll be waiting months regardless of what their estimates say and they will hold up your entire order if one thing isn't in stock

@SamAbraham 2 года назад

Glad I'm not alone lol, I guess the appeal for me was the alu inlets as I was concerned abt silicone ones getting crushed. But thats really not an issue with the relocated ones anyways. Wish I had thought about that more when I first did this lol. I'll probably buy their expansion tank first and some day install their inlets

@Mr.Affalterbach 2 года назад

An hour of entertainment

@brokeitracing1320 Год назад

I just used RTV sealant to hold the coolant sensor plug in place. It's been holding fine for the past 2 years 🤷🏾‍♂️

@SamAbraham Год назад

Seems like my JB weld is also doing just fine haha, if it works it works

@blaizon 2 года назад

Excellent video, thank you!

@Dannyboy404 Год назад

Best video I’ve seen in a long time. How are the turbos holding up? Also, how much did you make from them?

@SamAbraham Год назад

I appreciate it! Unfortunately I've only put about 2k miles on the car but they've been fantastic. Pushing 20psi of boost with a wedge tune on 91 (still direct injection only), and while I have no dyno numbers I'd guess mid to high 500s to the wheels. Lots of potential to grow though especially with port injection and ethanol

@Autohunter06 8 месяцев назад

44:38 my daily life moment

@SamAbraham 8 месяцев назад

hahaha

@EAGU 2 года назад

Good information in the video

@SamAbraham 2 года назад

Glad you found it useful!

@friguy4444 2 года назад

This is the car I'd love to have with these mods. I guess I'm kind of close but just the very LOW low budget version. Ebay 17T's etc. But hey lots O power still! LOL!

@SamAbraham 2 года назад

Yes absolutely! Only thing it takes awhile to get through allll the N54 maintenance items, and just replacing old worn out parts. Over my 5 years of ownership its received a lot of new parts hahaha

@friguy4444 2 года назад

@@SamAbraham You said it Sam! LOL. I'm doing it now and searching for a stupid boost back pressure leak. It's driving me NUTS! As well I'm hunting for the reason for the throttle surge. Or at least a power surge. I don't know if it's fuel related. I'm learning about reading data logs but trying to keep an eye on the gauges while driving is not my strong point LOL. I have just one code left to get rid of. 2D33- Absolute - Pressure Sensor, Intake Manifold: Signal. Sigh.........poo.

@xpo186 2 года назад

Great info!

@SamAbraham 2 года назад

Glad it was helpful!

@chriswelch9786 8 месяцев назад

You put a link to everything but the turbos

@SamAbraham 8 месяцев назад

Its in the description but unfortunately they dont seem to be available anymore. I believe you have to contact them directly to order a set now

@BrandonTriglia Год назад

How's the reliability? My stock ones are going out at only 80K miles and looking to upgrade as stock ones don't last long.

@kevin-jm3qb Год назад

Oh god. I feel your pain. Just to get to the turbo is a massive undertaking. Thank God I'm blessed with the b58. What happen to the daws? I just ordered the gen2 ultraflow-R. His was your daws experience overall?

@SamAbraham Год назад

It has been great so far, unfortunately the car was down for long after I blew my diff. Ended up going the M3 subframe route, using an F8X CF one piece driveshaft. It took way too long as I'm busy going to school 150 miles away haha, but now its all done and im ready to put some more miles on the car. I've only put about 3-4k miles on the turbos believe it or not but they've been great

@damon123jones Год назад

thats a massive job,iam wondering how many miles before i need to pull mine off

@eninety 7 дней назад

how would you compare this job to doing the clutch? i know ill have to do this soon enough and the clutch is probably the biggest job ive had to do. Although i think that was relatively simple this looks a lot more complicated 😂

@SamAbraham 7 дней назад

This job is complex more because of the lack of space. In my case doing it while on my back on the floor of my garage with the engine still in the car was a challenge, but not impossible of course. Having access to all the hoses and bolts is definitely what makes this job more tiring than others. There are less variables to be concerned with while doing a clutch job imo. All of the hoses and o-rings are enough to ruin your day if one thing is out of line. My advice is buy OEM hoses for coolant and oil lines, even some of my OE ones didn’t like up as they should. It’s significantly more expensive but worth it. Buy extra o rings too, a lot of the slots are sharp and cut the o rings if you insert them at even the slightest angle. Also just give yourself plenty of time and do it slowly

@eninety 7 дней назад

@@SamAbraham thank you appreciate it! ill remember those tips. atleast ill be able to take it slow so i wont be rushed

@omarluque8470 Год назад

Thinking of upgrading my turbos are this pretty good or can I get better ones how much house power can I make on them ?

@YTuberosity 2 года назад

How many miles on the car when the turbos blew?

@SamAbraham 2 года назад

114k. They were pushing 19-21psi for over 30k miles, and the car had been tuned since around 75k miles. Can't complain, never had wastegate rattle either

@schro3532 2 года назад

Is it a must to relocate Power steering, and coolant expansion tank?

@schro3532 2 года назад

Great Video nonetheless!

@SamAbraham 2 года назад

For relocated inlets, yes it is. You need new inlet tubes regardless with these turbos as they have a bigger inlet, I like the benefits of relocated so I went with that. You could do stock location upgraded inlets though and that would avoid relocating anything.

@schro3532 2 года назад

@@SamAbraham I appreciate it thank you for you’re input, will definitely help me out!

@tighematthew Год назад

Awesome. Lucky you do have a fire extinguisher 🧯 mine, actually did burn to the ground because of the blower wiring 😫

@that_335i4 2 года назад

what head unit is that? and does it have apple car play?

@SamAbraham 2 года назад

Made an install video along with several others, check this one out about carplay specifically: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-weXjSi4SV_w.html

@thisguyshorty3554 2 года назад

Are DAW chinese turbos? Ive seen different videos of diffrent brands and the comment section mention they are all chinese made with exception of Pure and RB.

@SamAbraham 2 года назад

To my knowledge no, in fact I have heard the contrary about Pure. They just have better quality control than the typical china turbo. While I've heard people argue about where DAWs are made, with bespoke manifolds and no need for cores, I don't really care where they were made. DAW claims they're assembled and balanced in Michigan, but I myself cannot prove that. The quality seems great, they perform well, and they back up their product with whatever happens. So, time will tell how these do! Not planning on pushing them too too hard at least for now, but I know people have squeezed high 700whp numbers even with normal flowmaxes like this. 600 is alllll I need.

@yasinqadi2450 5 месяцев назад

How these turbos hold up?

@kami8418 2 года назад

Were you running a catch can ? If so, for how long?

@SamAbraham 2 года назад

Yep for pretty much my entire ownership of the car, at least since I tuned it... so since lets say 80k miles. Changed these turbos at 113k ish

@scalper6922 2 года назад

Why is the wheel on yours different? Mine is 9 blade on my flow max turbos

@SamAbraham 2 года назад

Great question, I don't know to be honest. Assuming ur N54 too? Do u have the flowmax plus or normal flowmaxes like me?

@scalper6922 2 года назад

@@SamAbraham same like yours flow max turbos non plus, what’s ur Instagram so I can send you photos

@SamAbraham 2 года назад

@@scalper6922 Interesting, its @sam.amg

@SamAbraham 2 года назад

Just checked the DAW website and looks like they also have 9 blade compressor wheels on both their flow max and flow max +, and then I looked at a pic of the 775RS older turbos and noticed they had the 11 blade compressor. On the flowmax page of the DAW website it says "NEW FLOW MAX SERIES FORGED COMPRESSOR WHEEL DESIGNED BY US TO BE UP TO 15% MORE EFFICIENT THAN THE PREVIOUS WHEEL," so it seems like I managed to get flowmax turbos with 775RS compressor wheels lol. L on me I guess, didnt realize til now. I'll contact them and see what they say

@chrishortis7583 2 года назад

@@SamAbraham what’d they say? And how recently did you order them?

@rxcc5974 Год назад

So u have to get a 3in exhaust for these?

@SamAbraham Год назад

Yeah, Dynamic Autowerx says it is required, although they did mention you could run stock diameter for a short time. Could affect warranty though

@jonathandenenno305 Год назад

how’s reliability so far. looking at getting a set of flowmaxs myself

@SamAbraham Год назад

Been great for the 2k miles I drove the car with them, however I blew my diff and haven't really had time to get the car back together. I have a new M3 rear end in the car now but just waiting on a custom driveshaft before some more miles.

@hamtukie2095 2 года назад

Do you what i would need to install lhd turbos on a rhd wich had a conversion made?what is the reason they didnt fit?Thanks

@SamAbraham Год назад

The rear turbo fitment is very different in terms of the housing and where the line fittings are positioned. It would require custom lines, inlets, and outlets to make them work. I assume this is because the RHD cars have a steering shaft alongside the turbo side of the engine.