E-flite turbo Timber Thrust Reversing 

Here are the complete steps to set up your E-flite turbo Timber with Thrust reversing
1. Begin with the transmitter bound to the receiver.
2. Power ON the transmitter.
3. Set switch H (throttle cut) to prevent accidental motor operation.
4. Set elevator and aileron to high rate.
5. Set Flight Mode to AS3X (The menu will not open if the Flight
Mode is set to SAFE).
6. Power ON the aircraft. A signal bar appears on the transmitter
main screen when the telemetry information is being received.
7. From the main screen navigate to the last screen past the
telemetry screens, the Avian Programming menu (Avian Prog).
8. All configuration in the Avian Programming menu is done by
moving the elevator and aileron stick. Follow the on-screen
prompts to access the menu. Move the stick up or down to move
the cursor, left or right to select a value or return to the cursor,
and up or down to change a value when it is selected.
9. Set BRAKE TYPE: Reverse
10. Set BRAKEFORCE: 7
11. Set THRUST REV: Select the channel you designated for thrust
reversing in your transmitter. CH7 is the selection by default,
but do not use this default option if you are using Aux2/Ch7
for SAFE Select.
12. Select EXIT W/ SAVE to save your selections
Shop Horizon Hobby tinyurl.com/58...
Shop my Amazon Store I make a little commission that helps me grow my RU-vid channel
www.amazon.com...
Spektrum NX8 Transmitter amzn.to/3xH2BCG
Spektrum Smart S150 Charger amzn.to/2VNvH6G
Spektrum Smart Battery Checker amzn.to/2VNvH6G
Favorite Battery Packs
Spektrum 11.1V 2200 3S amzn.to/3ADrHEK
Spektrum 14.8V 2200 4S amzn.to/37Am3qb
Camera and equipment
GoPro Hero 9 amzn.to/2UasLAa
Clip mount for Gopro amzn.to/3iE2Zxy
Buy my I fly for fun not followers Shirts
tallguysrc.cre...
*****************************************
Visit my official website www.tallguysrc.com
Follow me on Facebook / tallguysrc
Follow me on Instagram / tallguysrc
Follow me on Twitter / tallguysrc
#RadioControl #horizonhobby #Tallguysrc