Eastonmade; 40C Processor Reveal. This Will Change Firewood Machines Forever!

Подписаться 26 тыс.

Просмотров 12 тыс.

50% 1

Thanks for all the feedback and support folks. It's very much appreciated. It's great that we are building such a strong community around our products where everyone can share their ideas and thoughts. Hit the like and SUBSCRIBE button if you haven't done so yet and I'll keep you in tune with what's going on in the firewood industry. Hope to see you all on the next one!!!
Give us a call for more information!!!
613-812-3213 Log Splitter Sales/Service
Check out these awesome RU-vid Channels!!!
Like our videos? Check these guys out!!!! If I missed you and you want your channel on the list drop a comment below and I'll add it on the next video.
Eastonmade Ultra
Glenn @oldschoolmillenial / oldschoolmillennial
Chris @inthewoodyard / inthewoodyard
Joe @joesfirewoodvideos / joesfirewoodvideosii
justin @lifesapprentice / @lifes_apprentice
Eastonmade Axis
Buckin billy @buckinbillyray / buckinbillyraysmith
Joe @ohiowoodburner / @ohiowoodburner
Adam @hometownacres / hometownacres
mike @KNLfirewood / @knlfirewood
Gord @gpoutdoors / gpoutdoors
Dan @armsfamilyhomestead / @armsfamilyhomestead
Brittany and Francis @BandFFirewood / @bfoutdooradventures
Neil @neilkochdigdriveDIY / @digdrivediy
Eastonmade 5-11
Gord @GPoutdoors / gpoutdoors
Eastonmade 9-16
Ben @survivingcountrylife / @survivingcountrylife7069
Paul @williamsonridgeoutdoors / williamsonridgeoutdoors
Eastonmade 12-22
Harry @thedriftlesshomestead / thedriftlesshomestead
Chuck and Deb @ironandoaksawmill / ironoaksawmill
Brade @savagefirewood / @savagefirewood
Reuben @earthandbloom / @earthandbloom
Todd @struckacordfirewood / @toddpac1
Eastonmade 22-28
Gord @GPoutdoors / gpoutdoors
Doug @offgridwithdougandstacy ru-vid.com?searc...
Eastonmade 22MB
Chris @inthewoodyard / inthewoodyard
Eastonmade 48C
Kevin @skidderkev / skidderkev
HTTPS://www.eastonmadewoodsplitters.com
#Logsplitter #firewood #logging #treecare #arborist #chainsaw #sawmill #forestry #homesteading #offgrid #heavyequipment #firewoodprocessor #logger

Развлечения

Опубликовано:

27 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@InTheWoodyard 2 месяца назад

I LIKE IT A LOT!

@EastonmadeWoodSplitters 2 месяца назад

Almost like it was built just for you lol

@BertsCustomCuts 2 месяца назад

It doesn't look like Chris could break this one.

@bwillan 2 месяца назад

@@BertsCustomCuts Careful, Bert. Chris may take that as a challenge. LOL🤣

@BertsCustomCuts 2 месяца назад

@@bwillan yup then I'll fix it.

@jessejones9830 2 месяца назад

Lol yep for sure get one Chris

@ohiowoodburner 2 месяца назад

The 40C looks AWESOME Andrew. Congrats to you and your team. I LOVE the innovation and leveraging technology. This is the type of machine our industry has been asking for...a machine that can take larger logs down to smaller splits ideal for EPA stoves, bundle wood etc.

@EastonmadeWoodSplitters 2 месяца назад

Thanks joe! Really appreciate the feedback.

@nicholisking9272 2 месяца назад

Joe needs some japa competition for some comparison videos;)

@cliffjenkins6419 2 месяца назад

Crikey Joe, imagine having to stack all the wood that machine could split in a day! What a weapon!! Fantastic to watch though, but the Japa is more than I could handle I think. Cheers from HB NZ

@WhiskeyRiverTradingCo 2 месяца назад

The fully automated tease in there has me more excited than I should be 😂

@Loggeraaron1990 11 дней назад

I need one of those I'm running my firewood business full-time with a stihl 500i a 07 gmc 1ton dump and a 27 ton troybuilt splitter

@aldredske6197 2 месяца назад

Hi Andrew!!😀😀 You really seem to have her dialed in. The only thing I see wrong is if your noses itches ,production comes to a halt. LOL!!🤣🤣 GOOD JOB BUDDY!!👍👍 Logger Al

@thefirewooddoctor 2 месяца назад

Then I'm screwed during tree pollen season.

@jessejones9830 2 месяца назад

I'll prob never be able to own one but if this ever makes its way to tn in my region,it would completely change everything down here

@lyleharkness-rv5vf 2 месяца назад

Great machine 👍 It shows that your design team really delivered on this one. The only things missing are a camelback hydration system and a urinal so you never have to step away from the machine 😂 Seriously though - great job, can't wait to see more of this machine and to see it in person

@FrankWende 7 дней назад

It's absolutely cool and yes, I would still offer a few things! Thanks

@wshauck9527 2 месяца назад

A BIG WOW> What a processer.

@kennethcarlson8713 2 месяца назад

That would look really nice in my yard

@jakebredthauer5100 2 месяца назад

What is your subscriber count?

@kennethcarlson8713 2 месяца назад

@@jakebredthauer5100 I don't have a RU-vid channel

@mikehauser9385 2 месяца назад

Chris from In The Wood Yard could definitely make good use of that machine!

@ericbrinson9741 2 месяца назад

You should build a road legal gas powered log loader trailer on 7 ton axles similar to Wallensteins 115 model

@irv2690 2 месяца назад

I second this!

@jsanchez3818 2 месяца назад

Nice unit. Have you ever thought about adding an air compressor to the processors? I like blow ours off after using it for the day.

@EastonmadeWoodSplitters 2 месяца назад

Not so much on the circular saws, but we do have them on the bar saws

@obiorah1 2 месяца назад

40C is an Incredible Machine the design is much better with 2 joy sticks, The Skid steer Grapple Attachment is Nice for Customers who are in the Tree Service Industry Stay Safe in Canada,

@Z-Bart 2 месяца назад

Looks like a joy to run Andrew! I say job well done.

@adrianphillips6238 2 месяца назад

Hi Andrew, you make incredible splitters and should be very proud.

@GPOutdoors 2 месяца назад

That is a work of art. Makes me want to start selling firewood. Cheers and congrats Andrew! Love the log grapple too. :)

@John_Ridenour 2 месяца назад

Wow!! Amazing machine!!

@Gavin_outdoors331 2 месяца назад

Looks very nice it looks way different from when it was at Bunyan could also be nice to have a seat to sit on

@jakebredthauer5100 2 месяца назад

I need something to just back up to (assisted standing).

@WilleysFirewood 2 месяца назад

I’m very impressed. This is what the industry has needed. I think you will do very well with this machine. I just may have to look at new instead of used now. This machine is a game changer!

@765Guys 2 месяца назад

Looks awesome, around the 25 minute mark I had to check to see if I had hit the x2 time button. It looks so smooth and fast!

@smorefirewood 2 месяца назад

We should see you in Vermont. The processor works pretty slick. 75hp to run that saw is what the saw shop told me I would need to run a 54” saw So I guess they were correct. I sure wish I was on the other side of these innovations, meaning in the shop. I do my best designing and engineering in the shop with a scratch pad and a welding table and soapstone. I think I will be in Vermont on Friday. I will share a couple nuggets of wisdom with you there.

@EastonmadeWoodSplitters 2 месяца назад

Looking forward to it!

@jakebredthauer5100 2 месяца назад

slasher blade?

@smorefirewood 2 месяца назад

@@jakebredthauer5100 more of a buzz saw blade. This is much narrower kerf

@anthonyspadafora1384 2 месяца назад

Beautiful piece of equipment!

@LeBlancfirewood 2 месяца назад

Wow that thing is awsome can't wait to see it friday

@SimmingtonSeasonal 2 месяца назад

Beautiful piece of machinery man!

@davidevans474 2 месяца назад

Looks like a nice machine 😊

@WestwayFirewood1313 2 месяца назад

Amazing! If I wasn't almost retired, I would definitely be looking at this processor. It would be perfect for my size operation.

@adirondackwoodsman 2 месяца назад

Very nice Andrew, can’t wait to see it in VT.

@NeighborlyHomestead 2 месяца назад

That is a sweet machine! You guys did a nice job! - Tim

@craiglange1781 2 месяца назад

Nice job on the updates Andrew. That is a sweet looking machine.

@mountaintopoutdoors 2 месяца назад

That is a pretty smooth running machine. Great job team.

@outdoorswithlarryrobin 2 месяца назад

Hello Andrew, Its a beautiful machine, and simplicity rules👏🪵🇺🇸

@skeets6060 2 месяца назад

Ya done good boys,, yep ya done good

@fralin1966 2 месяца назад

What a Beast Im mean come on this is pretty darn sweet !

@cliffjenkins6419 2 месяца назад

WOW, and it seems so easy. Lovely bit of kit Andrew,and what a great motor. Excellent design.

@dereksstuff8395 2 месяца назад

That really is a great machine. I think that would be perfect for my woodlot. You guys have got the market

@jamesminard1867 2 месяца назад

What's on the skid steer Sir ?

@TCsOutdoors1 2 месяца назад

The 40c with the 16 way is a moneymaker for sure!

@Growing-Our-Retirement 2 месяца назад

A little 38 special sounding music for the 40c!

@timroberge1498 2 месяца назад

I just bought the tickets to the Logger Expo in Vermont!

@EastonmadeWoodSplitters 2 месяца назад

See you there

@1squirreldog 2 месяца назад

I would love to rent one for the weekend set up for bigger wood .

@BertsCustomCuts 2 месяца назад

The few things I see is to make lighter go to a 2 strand deck and shorten frame for the guys that get 100in logs like Chris.

@BertsCustomCuts 2 месяца назад

Looking good. Can you drop next log on infeed when in auto mode?

@EastonmadeWoodSplitters 2 месяца назад

No. If its in auto mode it locks out all the other functions other than the wedge height

@grantsinclair4278 2 месяца назад

Well, I suppose if I ever wear my Axis out...lol Don't see that happening anytime soon. It's a tough piece of equipment!

@SkidderKev 2 месяца назад

Machine is looking good Andrew. Really have it dialed in now. Grapple turned out really nice too!

@EastonmadeWoodSplitters 2 месяца назад

The grapples nice, but nor near as nice as the skidder kev special!

@SkidderKev 2 месяца назад

@EastonmadeWoodSplitters hopefully you don't come after me for a patent infringement 🤣

@EastonmadeWoodSplitters 2 месяца назад

@SkidderKev i have the funny feeling that we wont have to 😀

@fxpestoperator5527 2 месяца назад

Top Notch ALL THE WAY Brother Andrew!!!!!!!!!!!!!!!!!!!!!!!!!!😃

@jakebredthauer5100 2 месяца назад

If I remember he wanted to make a less expensive model.

@fxpestoperator5527 2 месяца назад

@@jakebredthauer5100 Awesome!!!!

@user-rg6fp4bl1t 2 месяца назад

It could use a good comfortable seat.

@beenthere940 2 месяца назад

The processor runs exceptionally well on its own with minimum operator input. How long do you think it will be before someone gets bored just standing there and decides that it will run on its own and tapes off the triggers? First, they'll bring a chair to sit and watch, then they will start loading the deck while it's running, and finally they will leave it running and come back to check on it once and a while. Just like Tesla cars are not totally autonomous you are always supposed to have your hands on the steering wheel. Quite the machine.

@jakebredthauer5100 2 месяца назад

Oak Farm Firewood channel.

@user-rh1ec6ep5x 2 месяца назад

Yeah, but does it time travel. I bet you haven’t thought of that ? Everything else looks awesome

@jamesminard1867 2 месяца назад

I should have watched till the end Lol

@richukfirewoodprocessing7108 2 месяца назад

For the fully auto system have you considered a remote controlled system so the worker can still move about and do stuff and still be able to keep an eye on the processor? Its def a mod I would do the second its out of the warranty.

@EastonmadeWoodSplitters 2 месяца назад

Yep. It could easily be done now. Biggest issues being operator safety.

@waynetharp 2 месяца назад

All of the new innovations are just awesome, but Skidder Kev is sure gonna miss his heat and AC!!😢 Is the next step in the design of this processor getting the operator station back enclosed from the elements again? Having the station separate from the unit, besides plug in go would sure take all the bouncing and vibration out of operation as well!👍

@jakebredthauer5100 2 месяца назад

You could design one and market the plan through Eastonmade.

@Opinionatedguy1989 2 месяца назад

24 ton is fine with the softwood we have in bc.

@thomasmalloy900 2 месяца назад

Make control panel adjustable. I think it might interest other people.

@EastonmadeWoodSplitters 2 месяца назад

It is. I did pass over that

@EverythingElliott 2 месяца назад

2:30 are we just going to ignore the eastonmade grapple in the background?!

@EverythingElliott 2 месяца назад

Guess I should have just waited and continued to watch...that's what I get for jumping the gun

@iangregory5452 2 месяца назад

This has to be one of the smartest machines yet. So many features that make it suitable for the European market, especially the operator presence system. The auto feature is great, I think you have knocked it out of the park with this machine, of course if you had one just lying around and wanted to send it over to me……..

@jakebredthauer5100 2 месяца назад

Too heavy to ship.

@iangregory5452 Месяц назад

@@jakebredthauer5100 it fits inside a 40’ container so not particularly difficult

@jakebredthauer5100 Месяц назад

@@iangregory5452 If you are going to ship something it should be high quality, not an outdated clunker.

@jakebredthauer5100 Месяц назад

@@iangregory5452 Palax 750c has automatic wedge height adjustment. 2.2 second cycle time. Doesn't weigh as much and is probably cheaper. 540 Rabaud has the side-puncher type splitter.

@steveallison7940 2 месяца назад

Nice processor, but how would it do with hardwood? Like a Pin Oak with some knots.

@EastonmadeWoodSplitters 2 месяца назад

Pretty good. You can upgrade the splitter to be the same as our larger models

@briancartier8711 2 месяца назад

I’m looking at the auto and when u let off them it all stops but that’s a good feature but can be bypassed very easy by taping the triggers

@EastonmadeWoodSplitters 2 месяца назад

I dont think it would be really necessary. Its pretty natural to just grab both controls

@nicholascooper1193 2 месяца назад

Automation!

@neilmeyers5519 2 месяца назад

Andrew, do you have any plans to build a smaller processor similar in size and price to a Timberwolf or Range Road?

@EastonmadeWoodSplitters 2 месяца назад

We will lilley have a bar saw in the 60-70k range by the end of the summer. Be based off the bells 2000 chassis

@noeljbenoitii5740 2 месяца назад

How do you discharge the cookies?

@EastonmadeWoodSplitters 2 месяца назад

You have to reach into the chamber and remove them or pull them off fhe conveyor when they go by

@buckinfirewood 2 месяца назад

You guys seem to have that dialed in.. the double infeed chain is a great way to eliminate the F..ery... I was thinking that for my little processor a couple weeks ago. Have you thought of a log optimization feature?? Measuring the length of the log and making every piece the same length to eliminate the end cut..

@EastonmadeWoodSplitters 2 месяца назад

Havent got into any kind of optimization with it. I think it would be kinda tricky as most guys what the wood length exact

@buckinfirewood 2 месяца назад

@EastonmadeWoodSplitters most firewood suppliers I know would rather have an end cut go to the customer... when you start hitting the bigger numbers the waste becomes unmanageable.. I myself would rather send the ends to customer but have some control a bit that it looks more like firewood not garbage .. maybe something for later.. if you measure the waste from a log I'm sure the value of selling it at the cost of a facecord at 150 is much more beneficial than selling at 50 bucks a truck load...

@EastonmadeWoodSplitters 2 месяца назад

@@buckinfirewood thats a great point

@jakebredthauer5100 2 месяца назад

@@EastonmadeWoodSplitters It is about time for a rebellion against the 16 inch standard. Shorter pieces: 1. split easier 2. dry faster 3. are more adapted to machine manipulation 4. burn better 5. fit smaller stoves More sawing. It is not clear which would be more expensive per cord. I suppose your thinner saw blade saves on horsepower requirements. I always thought the circular saws raising all the way was very wasteful. 40C is the remedy (and saw teach). You did not mention log size capacity. I suppose, 18 inches.

@jakebredthauer5100 2 месяца назад

@@buckinfirewood What about a compromise? Cut some to the standard length and cut the last piece in half?

@mikestevend1029 2 месяца назад

What do you do with all the firewood you produce while testing all your amazing machines?

@EastonmadeWoodSplitters 2 месяца назад

Give most of it away to the employees

@paullandry4031 2 месяца назад

How often do you have to sharpen the saw ?

@EastonmadeWoodSplitters 2 месяца назад

Thats yet to be determined. But i would suspect you would get a season out of it without much intervention

@bungiemia 2 месяца назад

How do you pull out a rejected piece?

@EastonmadeWoodSplitters 2 месяца назад

Theres a door that flips open at the splitter. It is a bit of a pain, but we need to have the gaurding there

@TheGearDriven 2 месяца назад

Hey Eastonmade team, I have an incredible idea for a full size processor such as this. How can I contact you privately?

@EastonmadeWoodSplitters 2 месяца назад

Send an email to gage. Hes our main engineer gage@eastonmadewoodsplitters.com

@bwillan 2 месяца назад

How long would you expect the saw blade to say sharp? Is there an easy way to sharpen the blade? How much to replace a blade when Skidder Kev cuts through some steel? 😂

@EastonmadeWoodSplitters 2 месяца назад

It will stay sharp as long as you dont hit anything hard. You would send this unit away to a saw shop to get re tipped