Eastonmade; What's The Problem With The 40C Firewood Processor?

Подписаться 26 тыс.

Просмотров 13 тыс.

50% 1

Thanks for all the feedback and support folks. It's very much appreciated. It's great that we are building such a strong community around our products where everyone can share their ideas and thoughts. Hit the like and SUBSCRIBE button if you haven't done so yet and I'll keep you in tune with what's going on in the firewood industry. Hope to see you all on the next one!!!
Give us a call for more information!!!
613-812-3213 Log Splitter Sales/Service
Check out these awesome RU-vid Channels!!!
Like our videos? Check these guys out!!!! If I missed you and you want your channel on the list drop a comment below and I'll add it on the next video.
Eastonmade Ultra
Glenn @oldschoolmillenial / oldschoolmillennial
Chris @inthewoodyard / inthewoodyard
Joe @joesfirewoodvideos / joesfirewoodvideosii
justin @lifesapprentice / @lifes_apprentice
Eastonmade Axis
Buckin billy @buckinbillyray / buckinbillyraysmith
Joe @ohiowoodburner / @ohiowoodburner
Adam @hometownacres / hometownacres
mike @KNLfirewood / @knlfirewood
Gord @gpoutdoors / gpoutdoors
Dan @armsfamilyhomestead / @armsfamilyhomestead
Brittany and Francis @BandFFirewood / @bfoutdooradventures
Neil @neilkochdigdriveDIY / @digdrivediy
Eastonmade 5-11
Gord @GPoutdoors / gpoutdoors
Eastonmade 9-16
Ben @survivingcountrylife / @survivingcountrylife7069
Paul @williamsonridgeoutdoors / williamsonridgeoutdoors
Eastonmade 12-22
Harry @thedriftlesshomestead / thedriftlesshomestead
Chuck and Deb @ironandoaksawmill / ironoaksawmill
Brade @savagefirewood / @savagefirewood
Reuben @earthandbloom / @earthandbloom
Todd @struckacordfirewood / @toddpac1
Eastonmade 22-28
Gord @GPoutdoors / gpoutdoors
Doug @offgridwithdougandstacy ru-vid.com?searc...
Eastonmade 22MB
Chris @inthewoodyard / inthewoodyard
Eastonmade 48C
Kevin @skidderkev / skidderkev
HTTPS://www.eastonmadewoodsplitters.com
#Logsplitter #firewood #logging #treecare #arborist #chainsaw #sawmill #forestry #homesteading #offgrid #heavyequipment #firewoodprocessor #logger

Развлечения

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@tombartlett7448 8 месяцев назад

I would like to see GP outdoors or Outdoors with the Morgans.

@InTheWoodyard 7 месяцев назад

Good news, I like the improvements.

@savagefirewood 8 месяцев назад

Eastonmade #1 cheers 🍻 absolutely no doubt the best firewood splitters and processors hands down. Cummins ! 😆

@mjmtreeservicemaintenance2940 8 месяцев назад

Andrew I'm begging you to go with CAT. They are beyond a top tier engine and the support and service from CAT is amazing.

@skeets6060 8 месяцев назад

More bigger is more better !

@ChrisLascari 8 месяцев назад

Thumbs-up number 560. Skidder Kev is my guess. Power that baby up!

@rogerl8488 8 месяцев назад

Outdoor with the Morgans he making a clearing for it lol

@thejpnjn 8 месяцев назад

I’m willing to bet outdoors with the Morgan’s will be getting one of these Andrew!

@lindyaustin2095 8 месяцев назад

Outdoors with the Morgans

@davidedwards3734 8 месяцев назад

Glad you are seeing what to make an awesome processor work!! I dont have a RU-vid channel, so it won't be me!!!!🤣🤣🤣🤣🤣🤣 Im guessing In the Woodyard with Chris!!! Stay Hydrated and Have a Safe Day

@scottdennison8408 8 месяцев назад

Hey Andrew, my guess is Outdoors with the Morgan’s, Mike keeps talking about building his firewood business and always speaks very highly of Eastonmade

@foxlake6750 8 месяцев назад

Not a fan of the Morgans, the show feels like one big advertisement and Mike works it. Good for him, but I got out of watching it.

@brandonthefinanceguy978 8 месяцев назад

Has to be with Chris and the boys at In The Woodyard!

@cherylshannon-vp7uc 8 месяцев назад

Cat would be a great choice but you still have to look at costs for an engine and repairs. Kholer if they made one that had the horses you need to run this beast but reliability would not be a question with Kholer.

@BertsCustomCuts 8 месяцев назад

Cant wait to see it run when all the changes are done. Its gonna be a beast.

@LLAND18 8 месяцев назад

Just discovered this channel and Eastonmade. Living in Alaska I really like the cab on the 48C with a heater would be great to be able to run for most of the year.

@EastonmadeWoodSplitters 8 месяцев назад

The 48c is a nice machine. Thanks for checking us out

@smorefirewood 8 месяцев назад

At the Paul Bunyan I saw it saw. But the recovery time between cuts was lacking a bit. It just took too long to stand back up and cut. 65-70 hp for a blade that size is what I was told by people who know more than me. #1 Perkins/Cat #2 Deutz #3 hatz

@EastonmadeWoodSplitters 8 месяцев назад

Saws working really good now dana. Appreciate the feedback

@smorefirewood 8 месяцев назад

@@EastonmadeWoodSplitters I’m sure you got it tuned

@KCBarr1 8 месяцев назад

There is no replacement for displacement. Pour the HP to it. We had a Deutz powering our sawmill (5 cyl) and it was basically bullet proof.

@Andrew_From_NB 8 месяцев назад

Awesome update Andrew! Looking forward to seeing what you an the team come up with! Andrew from NB :)

@kevinholbrook7174 4 месяца назад

That is a very close what I am looking. Very nice work Andrew and well done! Here is my Ideas for this particular project. #1: I want a folding conveyor. But, it would fold back onto itself in the shape of a “L”. but I also need it smaller in width and about 2-3” deeper. The chain is like the one on your Axis except with double chain. #2: I would like a captain’s cabin on the left side. #3: Have you ever thought about using a Cummins 4bt engine with 105-HP? And let’s not forget about adding a “TOOLBOX”!!! lol #4: Ad a side shoot for the scrap chunks. Andrew, I believe that sums it up nicely. I hope that these changes will be considered in production. Thanks 🙏 for coming out with this model. P.S. You can name it: 40cs (S) Special. I hope you like my inputs and suggestions. I almost forgot about the chain on the conveyor. I want to use the same one that is on the load deck. And have a bolt-on plate type for the sawdust shoot.

@ericcrockett6396 8 месяцев назад

What engine I'd like to see would be a Detroit 4-53T, but I know that's not really practical to put 50 year old engines on new equipment lol. But seriously from a service and parts stand point I would say kubota, cat, cummins, or John deere. Dealers for those 4 are quite common and parts are easy to source

@timstout781 8 месяцев назад

Hoping it's Mountain top Outdoors. Very deserving. Everything there is Orange and Blue.

@WestwayFirewood1313 8 месяцев назад

Andrew, CAT would be the best choice in our area. I know it may be a bit more costly, but if you don't have a dealer/service department in your area for your equipment, the money someone would save by going with a different, cheaper motor wouldn't be any savings at all. There are no Hatz or Deutz in my area, I don't know if there are any in my state. As you already know, accessibility and support are of major importance in making a decision when purchasing equipment. Can't wait to see the finished product!

@ForestHogOutdoors 8 месяцев назад

Would love to see the CAT motor go into this unit. Willing to bet this shows up In The Woodyard in the next week or two. Awesome

@killinskindlingfirewood1851 8 месяцев назад

A really good friend of yours. Would that be Gord at GP Outdoors, or Kev at SkidderKev? I’m glad you changed out the belt for a chain.

@bwillan 8 месяцев назад

distinct possibilities as they are reasonably local to Eastonmade HQ.

@HometownAcres 8 месяцев назад

My guess is GP Outdoors

@nashlindner3146 8 месяцев назад

Throw a CAT engine in it. One thing I've learned working in maintenance in a large factory is that things will always break when you don't want them to. The key is to either have parts on hand or find local companies to get parts you don't have. The ability to have a short turn around on parts or even having a dealer do the work, its worth paying a little extra.

@toddpacheco4748 8 месяцев назад

Excellent video Andrew you’re making something for the guys that do firewood for a living that’s affordable to them 😮😊❤

@michaeljheinz3336 8 месяцев назад

Thanks for the great update Andrew.

@765Guys 8 месяцев назад

Lookin good Andrew! I work at a cat dealer. Dealer network, field service and parts are tough to beat.

@robertmurray632 7 месяцев назад

Hatz silent 🤫 pack engine would be fantastic Andrew 👍

@csoliday07 8 месяцев назад

It’s going to In the woodyard to replace his processor!!

@olddawgdreaming5715 8 месяцев назад

Thanks for sharing Andrew, get it all together and get it on the road> Stay safe , Fred.

@cliffd.4646 8 месяцев назад

I already know where it is going just waiting to and excited to see it show up

@GPOutdoors 8 месяцев назад

Some great improvements Andrew. Pretty exciting for the business and for customers. Looking forward to seeing it in action! Cheers!

@treemanclint2883 8 месяцев назад

Don't forget Yanmar. Totally bullet proof. Kubota is right up there to. I have a 5 cylinder Deutz, only one I've ever owned, massive amount of power. John Deere powers a lot of equipment they don't build in the forest industry.

@aaronmilburn4962 8 месяцев назад

Can’t wait to see who gets it!

@BacktoBob1 8 месяцев назад

Andrew that machine is going to do well for you. The slope in the infeed may not seem like a big deal to some, but it really is indeed quite helpful!

@55turftech 8 месяцев назад

hey Andrew, as far as an higher horse power engine goes I would suggest having a look at the Kohler line of diesel engines. they are pretty solid and lots of dealer representation across North America. Ray

@BobbySixguns 8 месяцев назад

Looking forward to seeing run with the changes. It was pretty awesome to see it run at Paul Bunyan. All those engine engines are pretty solid choices. I'd say Cat, just based on support. I know in my area Hatz and Deutz support are few and far between.

@bwillan 8 месяцев назад

Which ever engine maker you pick, I think parts and service availability should be a key consideration. As to where it will pop up first on youtube, I think Chris at In The Woodyard would be the ideal candidate for this processor. The size and length of logs he buys would would suit this processor well.

@sirwallygator565 8 месяцев назад

You should send it to a place where the guy would buy one. Don't send it to a place he would never buy one because of cost. That is bad advertising

@bwillan 8 месяцев назад

@@sirwallygator565 Remember Eastonmade is using social media (youtube, facebook, etc) as part of their marketing budget. So it stands to reason to send it to firewood channels that have a decent following and also produce videos regularly. In other words, to get as many eyeballs on their equipment as possible.

@carnesdiy 8 месяцев назад

Mountain Top Outdoors, is my guess. Patti would love it.

@hardworkingmanoutdoors 8 месяцев назад

I can’t give you any advice on what engine to go with but I’m sure you guys will figure out what fits best. Love the constant modifications and improvements. Can’t wait to see the final product. The test run at the Paul Bunyan show was pretty impressive. I’m sure the tweaks will really have it running smooth and Rachel proof lol.

@1squirreldog 8 месяцев назад

I’m sure you will figure it all out & put out a quality product .

@kahvac 8 месяцев назад

More Power !

@pauldixon3089 8 месяцев назад

When you decide on what hp rating to go for, I'd check out what the torque output for each engine is compared to what is currently on the machine. Running those pumps will require a lot of torque when under full load. Better to be ahead than overloading a small unit I'd say.

@johnnieset9518 8 месяцев назад

I saw it at Bunyan, looked like it needed a few tweeks. I'm sure when its ready, it will be a beast like the rest of the Eastonmade line.

@jeremyjames1280 8 месяцев назад

Get a winch mounted on an arm and the end of the feed chain and a fold down loading ramp. Some of us have limited space and availability to bring additional support equipment to feed it. Perhaps even a bolt on log lift as well.

@nickjcyr 7 месяцев назад

I’d pay a little extra to see a cat engine on there but that’s just me. Fairly easy to get parts for long term thinking

@MeMyselfAndTouYube 8 месяцев назад

I'm not sure about the new Deutz engines but the older ones are pretty solid. We've never had troubles with them in our older tractors.

@johnnyhomegrownholmgren9999 8 месяцев назад

Hi! I problaby would choose the Deutz engine. They have always been reliable, and quite easy to find parts for. 👍

@toddsoutsideagain 8 месяцев назад

Chris @In The Woodyard! I watched you run it at Bunyan! Awesome machine just out of my league. 👍🏻👍🏻

@BertsCustomCuts 8 месяцев назад

Gavin got to run it at the show.

@toddsoutsideagain 8 месяцев назад

@@BertsCustomCuts He Will get to run it a whole lot more soon🤣🤷‍♂️

@jamesbainton 8 месяцев назад

In the Words of Tim Taylor: More Horsepower!!!

@EastonmadeWoodSplitters 8 месяцев назад

Ugghhh ughhh ughhh lol

@bradleyvanspriel6258 8 месяцев назад

I think this might be at my house in a week or two

@michaeld.3378 8 месяцев назад

Jeff and patti or Chris in the woodyard. Love your products.

@kknows3512 8 месяцев назад

Cat all day, all the way!

@randyschneider6086 8 месяцев назад

You need some gravel in that yard,French drains under the wood pile so wood not sitting in mud.

@BevanMoffatt 8 месяцев назад

Can't go wrong with cat. Everything is either on the shelf or in the next day 👍

@fralin1966 8 месяцев назад

As always making the best better !

@EastonmadeWoodSplitters 8 месяцев назад

Hey theres tim!!! Im heading to the camp all next week.

@fralin1966 8 месяцев назад

say hello to the boys hope you get a slammer@@EastonmadeWoodSplitters

@PineInTheAshMilling 8 месяцев назад

Andrew i'll demo it. How about yanmar engine.

@donaldslate4195 8 месяцев назад

Outdoors in the 608.

@aldredske6197 8 месяцев назад

Hi Andrew!!😀😀 Was hoping to see it in Appleton Wisconsin. But the way it sounds it won't be ready in a couple weeks to come over here. I'm guessing that it will be at GP outdoors. A Deutz engine would be a good engine for on it. They make great stuff!! Take care my friend!!😀😀💚 Logger Al

@earthandbloom 8 месяцев назад

Ill be keeping an eye on Skidder Kevs channel

@markMac407 8 месяцев назад

Eastonmade with a CAT!?!? That's 2 out of 3 pieces to a wet dream!!! Not sure where it's going but they'll be extremely Happy when ot gets there!!!!!

@glennmaynard7233 8 месяцев назад

Hoping it's going to Rachel and Heath at Hard Working Man ! No matter where it goes It'll be a stretch for anyone to produce as much firewood as Chris over In The Woodyard.

@KNLFirewood 8 месяцев назад

I’m going to guess In The Woodyard or GP. Leaning towards GP….we’ll see!

@fricknjeep 8 месяцев назад

hi there good looking proooser john

@lonnieandrhondawatkins321 8 месяцев назад

Giggety I wanna see it in action

@Z-Bart 8 месяцев назад

I do know it WILL be tried and tested before going to the masses. Looking good Andrew. The machine, not you. LOL!!!!

@cah_sawmill 8 месяцев назад

I'm here friend

@chriscarlson3563 8 месяцев назад

What happened to the rubber in feed??? I see this one has chain, said in the first video the rubber freezes down slips when wet. Glad to see it's a chain now

@lendane8517 8 месяцев назад

In The Woodyard? Is Chris finally getting a processor for his brother Ken?

@Lens-KeepingBusy 8 месяцев назад

Hi got a question, Homestead Jay did a video of extending his splitter knife higher, will this bend the ram, more force is now at the top , love your comment 🙏🇨🇦, good video to 🚀🪵🚜🏰👍

@EastonmadeWoodSplitters 8 месяцев назад

It will put a lot more leverage on it for sure

@hardworkingmanoutdoors 8 месяцев назад

For channel guess I’ll throw out Earth and Bloom maybe a test run for his fundraiser?

@BGWenterprises 4 месяца назад

Just throwing a dart at the wall.. In terms of hp. Mabe a standard and high output version. Mabe one at 50hp~ and one at the 74 line in the sand point.

@EastonmadeWoodSplitters 4 месяца назад

Not a bad idea at all. Unfortunately there really isnt a huge cost difference between the 50 and 74hp engines. We did a bunch of testing last week with the 74hp deutz and the machine is incredibly productive and easy to use

@BGWenterprises 4 месяца назад

@EastonmadeWoodSplitters Other than the cost difference. The only argument I can come up with is, fuel consumption per amount of run time. Anyway I'm just west coast r and d Talking out loud. LOL

@Berensmetalworks 8 месяцев назад

Outdoors with the Morgan's

@GregPrince-io1cb 8 месяцев назад

Can't beat a Kubota or Yanmar.... keep the Diesel Extortion Fluid off of it!!!

@craigdenor2077 8 месяцев назад

Outdoors with Morgan's!

@jandblawncare8570 8 месяцев назад

My vote goes to CAT....dealers everywhere with stocked shelves.

@AliceistheGoon 7 месяцев назад

I’m curious, but have you considered a PTO driven processor? Thanks great videos.

@WoodysRTBFirewood 8 месяцев назад

Hello Andrew Well, if this machine still requires some modifications, my guess is it’s not going far or across the border so the next logical place would be GP outdoors because he does not have a processor whereas Skidder Kev already does Cheers Woody !!!

@thomasworatschka9657 8 месяцев назад

Andrew's front yard

@kennethrobinson5151 8 месяцев назад

My guess is Allen family Firewood

@travisdoesfirewood 8 месяцев назад

Drop it off in my yard;) I'll work the sh!t out of it!!!!!😊

@kenarenforest 8 месяцев назад

please, please, please use the yanmar engine... they are by far the best diesel engine on the market!!! ... and, I wish you would return using the Honda on your firewood splitters. (Vanguard engine on the Ultra needed a warrantee repair immediately; one on the 12-22 is working just fine) I might consider buying a processor in the future, perhaps

@mountaintopoutdoors 8 месяцев назад

Maybe Mountain Top Outdoors. Lol.

@mikehughes2026 8 месяцев назад

Employee Discount!!🇺🇸🇨🇦

@billwestphal1421 8 месяцев назад

I'm guessing fire wood at the furnace will be demoing it soon.

@atskooc 8 месяцев назад

Back 40 mentioned one of these on the Wood Hounds podcast this week. Is it this one?

@steffentangen8039 2 месяца назад

get the yanmar motor thats in everything diesel one. will last forever

@jimjackson5836 8 месяцев назад

Cat engines are Awesome!!!!

@sirwallygator565 8 месяцев назад

Make the processor smaller.. There is a reason people like me buy the European processors. It's because we are always takeng it to very narrow tight spots and your machine is just to big.. Try making a European style but make it Easton made... You bump that HP up and up the pumps you may as well just call it a big machine... Here is a reason why commercial guys buy the European ones and it's not cost

@kentcorbett5436 8 месяцев назад

It's hard to guess when you say one of your good friends. You have so many so my guess would be. I don't think you're going to trade it with. Princess in the world Jared but I can see it going to mountain top about doors or outside with the Morgan. On a trial basis as Mike is looking to double his firewood for next year. And I think a processor is the way to do that. Or because it's just testing. And you wanna work out the kinks? And put it through its paces. It could be skidder Kev😂❤😅