Easy Kitchen Faucet Repair / Leaking / Low Pressure

Подписаться 6 тыс.

Просмотров 146 тыс.

50% 1

In this video I'll explain how to repair some of the simple problems on kitchen faucet. You can also use this video as a guide to disassemble singe handle faucets . This specific faucet I am using here is Glacier Bay Model # 67737-0008D2 goo.gl/mGqbhc
Link to the sprayer disassembly
• Glacier Bay pull out f...
Faucet parts at www.chicagofaucetshoppe.com/
Link to the retrofit valve goo.gl/cvwYGd
The hex tool I used is 5/64
Please don't hesitate to comment and ask any questions.
Thank you for watching
#DIYrepair #faucetrepair
============= Social =============
Email utkan@masterofnone.tv
Web www.masterofnone.tv
You can follow me on twitter / masterofnone_tv
Instagram / masterofnone.tv
Follow me at Facebook / masterofnone.tv

Хобби

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@RexBenincasa Год назад

Right off the bat you told us what size allen wrench we'd need to work with this unit. THANK YOU! Too many times, people leave out the most basic/important information.

@frandriedger8450 4 месяца назад

That was such a great video, I'm 77 and this is something that I will tackle! Here's to success!

@chrisjones1199 3 года назад

We just had the HARD FREEZE here in Houston and I needed to clean the lines of debris. It was incredibly difficult to get the right information on the repair and removal/install. THANK YOU SO MUCH FOR THIS VIDEO! Saved me a lot of time and money!!

@ericdiaddorio5544 4 года назад

Hello Master of None, My faucet had the exact problem as yours even though it was a different brand. Thank you for walking me through the steps to check! I have lived in this house for 3 years and it now has full, strong pressure. Thank you for being so helpful. Eric

@JoaoCosta-zq8qi 3 года назад

Thanks Master of None for sharing. With your explanation it´s easy to fix that kind of problems. It´s cheap and sustainable. We need to reduce the he replacement of equipment that doesn't work, with NEW ONES. People like you are very important. Happy that the USA is back to the Paris Agreement.

@mataylor8330 3 года назад

Thank-You Eddie, I was about to either buy a replacement faucet and then hire someone to install it or hire someone to fix it. After watching your video I did your recommended diagnostic and part in hand went to Home Depot who actually had the part. Fixed faucet in less than 20 minutes for less than $20.00. Thanks again.

@rhumes4670 4 года назад

Yes, thank you for posting this video! You saved me time and money. Best of luck through all of this Covid craziness!

@patdaley3131 Год назад

Just fixed this at my sister's house, saved her $350 at least for a new faucet. Thanks for this vid, man.

@chrishong8522 4 года назад

Thank you for the COMPLETE explanation of a low pressure problem of a one-handle kitchen faucet !!

@gregfoy3479 3 года назад

Thanks for the Vid- Faucet was dripping-was able to pull handle and tighten gold nut-clean crud from inside chrome ring and reinstall- no leaks!! allen nut was a challenge to find as you stated Cheers

@DC-rh3ix Год назад

Amazing! I fixed my faucet with your video. Truly appreciated! Thank you.

@jeffcantwell8764 Год назад

PERFECT! Exactly what I needed. Thank you for taking the time to post this.

@JDearborn91 2 года назад

This video was perfect for me as I was investigating a leak in the same exact faucet model. Thank you!

@eponymousIme 2 месяца назад

4:47 A tip for removing the threaded component (the cam). If you look closely you will see indentations along the threaded periphery of the cam. One of those indentations is visible in 4:47 in this video. Those indentations are where you place the jaws of your pliers to loosen the cam. Hold the jaws of the plier *perpendicular* to the cam (i.e. so the plier is "standing up" instead of lying flat as show in the video) and place the tip of the jaw into the indentations and then twist. Sooo much easier. . . .

@nivia9174 2 года назад

Thank you thank you. Exact model I need to fix. I've looking for quite a while for instructions for this model. Also, the video is perfectly done.

@matthewlakin2818 4 года назад

I have the exact same faucet and it was leaking heavily. After watching your video, I determine the issue was the cartage wasn't held firmly in place since the screw holding them together that you recommend we 'torque a lot' I was able to loosen by hand. Thanks a bunch for posting this. You saved me a good bit of money.

@MarcoDulog 2 года назад

I just "torqued" the "threaded/flat sided" nut holding the cartridge. For some reason, mine loosened when i removed it... hoping this works. Thank you for your video!

@dianerupp9977 5 лет назад

I removed the cartridge and had several black pieces blocking the three holes. Once I removed the debris, I have a strong flow of water from my faucet. Thank you for posting the video. DIY, in this case, DIMe.

@superiorexercise 3 года назад

THANK YOU! The nut that holds the cartage down came loose, all I needed to do is to tighten the nut down, that stopped the cartage from leaking. Thanks again, you made a difference!

@shinsekaisamurai 2 года назад

It was the same story, so far, for mine. Good thing, since Home Depot no longer carries this cartridge!

@sweetuheart 4 года назад

Thank you very much for this video. We were able to fix our faucet in half an hour!

@activistwithatwist1132 2 года назад

I was experiencing low flow out of this (apparently identical?) Glacier Bay "Market" faucet. Today I just extracted and realigned the cartridge, and rather than fixing it found that flow had been reduced to a drip! I was freaking out, but turned out to not be the cartridge's problem. In your video, at 7m10s, you showed me exactly what my problem was: a clogged filter right before the "shower head" of this faucet. Cleaned it and water is flowing again. I will still need to disconnect the soft hose from the underside of the main assembly, and flush any other debris within it. At least the faucet is usable at the moment. Thank you VERY MUCH for making this video!!!

@herrsanz 4 года назад

I just save S100 in 10 minutes. 8 of them spent watching the video. Faucet fixed. Thank you so much.

@eddiemeza6021 5 лет назад

Thank you so much for this video! My faucet was leaking and I was about to get a new one. But I was able to take apart the faucet and fix the problem thanks to this video. Than you so much!!!!

@sadben6537 10 месяцев назад

Great video, happy you selected a very common faucet brand and model. greaat job

@bobbibuzzell8485 3 года назад

What a thorough job of explaining. Thank you.

@evojutsu 3 года назад

Worked! I had a leaky faucet on the top - drip and drip. And on the bottom - dripping underneath the sink. I replaced the cartilage! And bought the part to Home Depot. I Perfect the part is a Moen the inner white/blue part. It’s also labeled kerox on the white/blue part.

@daltondalton3965 3 года назад

Thanks for saving me a lot of headaches. Nice very detailed video

@Mockingbird0592 2 года назад

You just saved me some money brother! Thanks so much 🙏 😊.

@lafemme8 3 года назад

Thank you! I was able to disassemble the faucet thanks to you.

@scotthaley7457 3 года назад

HaHa I have the same faucet and it was the same problem. Wait til the end ! I would recommend he could have disconnected the slow side and put it in a bottle then turned on the cold side to blow out the slow side. Boom problem solved! Maybe try this before taking the faucet off! Thank you for your video!!

@wildmandan9938 3 года назад

Video was extremely helpful. Thanks!!

@s0la.scr1ptura Год назад

Excellent. Thank you so much I was finally able to fix my faucet.

@jmillacutty Год назад

I found your advice at 9:40 the most helpful 😂

@stevesloat4670 Год назад

Thanks man!! Saved me a ton of money!!

@sclptrjoel 5 лет назад

great video! Very clear !

@kahunaorganics5527 2 года назад

Great video! Thank you for the nice detailed Information ! Happy Holidays!

@jamessedgewick5222 11 месяцев назад

Very helpful. Thanks for posting.

@JustScottPaid 2 года назад

9:40 hahaha! That was just like me a few times while doing this. But thanks to you, I did it! Thank you! Liked and subbed.

@guysam3242 4 года назад

Great Lesson and Thank you Sir....

@whatthefudge6511 5 лет назад

Thanks buddy this helped alot

@shamsafroz4785 3 года назад

Thanks bro useful video , of each possible trouble inside the faucet and don't forget about retrofit valve nut with ferrule which is tapered , ferrule facing outside . Thanks

@DrYouMrTube 8 месяцев назад

I wish you showed the neck removal. I have the same one and the neck won't come out of the base part further than 5mm, like something is blocking it.

@antonykritharis1255 4 года назад

Thanks , that helped.

@audraheadley5707 4 года назад

How do you fix a glacier Bay the on and off handle. It's very hard to turn. There's a little hole in the back of it does that loosen it up?;if so what tool and how I've already use WD-40 and cleaned out what I could

@PlumbingPartsPro 5 лет назад

great video. very informative

@phibeta4669 2 года назад

Great walkthrough tutorial

@2LIVCREATE 5 лет назад

Thanks for sharing! 🔧👍

@kontact6750 4 года назад

Really helpful, thanks

@tneighbors 3 года назад

Thanks! That helped!!

@paulp2385 Год назад

Great video

@blainegallagher4601 Год назад

Thanks I fixed it

@kaiwenliang2891 3 года назад

Thank you so much!

@sylvainvincent4389 Год назад

Thanks so much ! Really helpful! I have asked at Home Depot lol is there is no one to knows this !

@honduranhomey 4 года назад

Thank you sir!

@johnsabourin4168 3 месяца назад

The only part I needed you to explain is the mesh filter at the bottom of the faucet head,( you only took apart the top ...where the water comes out) I need to know how to get at the other filter that is at the the end of the head that connects to the small black hose. The part looks like it might unscrew like every thing else, but it's just plastic and I'm worried I will crack it.

@rdy4trvl 3 года назад

I have the same unit (actually #67778) and there appears to be a leak inside the body. Water is running out the bottom of the unit (where the hoses come out of the body, under the sink). The hose connections under the sink are fine. It leaks even if I turn hot OR cold off at the source. This is very odd.

@erikfrankfurt4650 3 месяца назад

I have the same faucet, and it took a metric 2 Allen wrench for the handle to come off.

@MATTP545 3 года назад

Thank you!

@mpsv8426 4 года назад

Thank you for this video! my faucet had dirt in it, like you said.

@masterofnone 4 года назад

I am glad you were able to fix it.

@davemon8130 5 лет назад

Just wanted to add if removing the whole unit to replace there’s a set screw on the base on the side to get the whole unit to come out. (Size 2.5 mm Allen ) hope this helps

@subrimedzoafin2927 4 года назад

Do oyu have a leak video for this faucet?

@funquetin 4 года назад

Thank you so much for your video!!! The hot water from my faucet wasn’t working, so I follow all your steps and now is working. There was a screw on the hot water hoes. I don’t how it gets there. Thank you again!!

@jeffreycortez3961 4 года назад

Thank you for posting this video. You just saved me from having to buy a new faucet.

@masterofnone 4 года назад

Glad to help.

@maugustyniak 3 года назад

Świetne!

@jimpatel1813 Год назад

good job

@alexislopez8083 Год назад

You saved my ass thank you !

@daviddanielson3522 4 года назад

Thank you.

@OhShmity 4 года назад

The switch on my faucet is jammed a bit, and ruins the pressure. Any idea how to get to it without damaging the faucet?

@stbob5985 3 года назад

Thank you very much

@a.j.sporinsky3751 5 лет назад

How do you remove the black fastmount locking nut? Is it just a twist counterclockwise with a wrench situation? It seems to be locking and doesnt want to turn

@masterofnone 5 лет назад

You need to put pressure on it while turning it , that's the only way threads engage . after couple turns you should be able to pull the nut out

@javiercanoruvalcaba5070 3 года назад

How can one emove the the inside part where the cartridge sits?

@markmohebi Год назад

Thanks

@jcd7443 5 лет назад

Thanks for the video! I have the same unit. Do you know how to disassemble the pull-out spray head? I've removed and cleaned the filter and aerator on both ends but still have low water pressure. The flow is fine when turned on with the spray head removed, so I wanted to take a look inside the spray unit. I don't want to break it. Thanks.

@masterofnone 5 лет назад

Here is how. Get a flat screw driver and pop the bottom part of the selector button up. Then you can pull the top part away from it . It comes right off. Small Philips screw holds the area around the button. Remove that , You will have 4 more screws holding the valve assembly. If you can't get it out, let me know I can put a video on my instagram to show hot to do it.

@jcd7443 5 лет назад

I appreciate the fast response. Yes, I've removed the screw but would love to see your video on instagram. @@masterofnone

@jcd7443 5 лет назад

Ok, I go it out. No video needed. Thanks for the helpful tip! @@masterofnone

@masterofnone 5 лет назад

@@jcd7443 To late HA! HA! HA! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-g3FJvZp_EuY.html

@ceciliagoldman319 7 месяцев назад

Hi How can I fix the spray of this faucet ,it does not stay on straight flow ,makes a lot of noise because it wants to go to spray. I can not find the replacement of the stray part..Can you help me please. Thank you Cecilia

@brianjoxxx 7 месяцев назад

what size hex driver?

@skuzmanovic3227 4 года назад

Do you know anything about small spring and tiny platic cage what goes around that spring? It fell off when I was trying to repair my old Moen pull out kitchen faucet and I can tell where does it belong. Thanks

@skuzmanovic3227 4 года назад

*can't

@masterofnone 4 года назад

Send me a picture on Instagram ( my Instagram listed in the description) I'll try to help

@brathajoe1 5 лет назад

Do you have a link to the cartridge? I have the same faucet.

@masterofnone 5 лет назад

Google RP90118

@salvadorperez7931 4 года назад

👍

@floyd27860 5 месяцев назад

My man. Trying this s#*t right now!

@ejacksonx9 3 года назад

I have this exact faucet and my issue seems to be the hard water build-up in the hose. Is there a way to fix that? I've now been told this hose and head are no longer available.

@masterofnone 3 года назад

only thing comes to mind is removing the faucet and filling the hoses with CLR (or vinegar) and waiting for a while and flushing it to see if it will help

@julieolsen2928 Год назад

Hi, I turn my faucet off and walked away when all of a sudden the handle pushed back to the on position it turned back on. It scared 😱 the heck out of me that day. It continues to do that so I shut the water off and have to turn the handle either to the hot or cold position. Have you any suggestions why this might be happening? Thank you, Julie

@masterofnone Год назад

Yes. Usually when the valve is worn out it will not stay in position. Or the handle is installed incorrectly and pulling down to open position since it's not designed to stay that way

@svitlanakordonska3522 Год назад

my faucet is not leaking , but not staying onthe base and jays down on countertop. I cannot find out why?

@RalphWLundvall 4 года назад

Great video! You covered many issues not covered in the other videos I found.

@bgregg55 5 лет назад

they can send men to the moon but can't come up with a better method of attaching the handle to the valve than a pathetic allen head set screw.

@kendhillon8483 Год назад

kitchen sprayer is stuck and wouldn't pull out from the faucet, any idea

@raptr49 2 года назад

Thank you for the great video. But 10 minutes to replace??? You must be a freaking genius. It takes me half an hour just to clear all the crap under the sink to gain access and then replace it after changing the faucet. :)

@masterofnone 2 года назад

Great time to throw half of that junk out , right?

@drb1067 3 года назад

one of my hoses has a leak. How can you replace a supply hose on these types of units? it appears the hose connects up inside the faucet body.Can you access the body of the faucet any further than what you show in the video?

@masterofnone 3 года назад

Most of this faucets will not have replaceable supply hose. I am sorry

@drb1067 3 года назад

@@masterofnone not your fault, Thanks for info. Need to get a new one.

@LVX03 3 года назад

Can you replace the hose on this unit I have the exact one and it’s leaking and it looks like it’s the cold water hose

@masterofnone 3 года назад

No you can't.

@LVX03 3 года назад

I’m confused on where it’s leaking from now because it was dripping from the top of where the hoses go through the counter and when I took everything apart the hot water valve was still leaking I took apart the whole faucet and there is no debris inside or anything Says the faucet was manufactured September 2019

@mountainmanjim6366 3 года назад

Great video, but mine is leaking down the feed lines.. could this be an issue with connections inside the head?

@mountainmanjim6366 3 года назад

Inside the body I guess. Because I can pull the head and no water is leaking there. Pulled cartridge and looks clear, water pressure seems good, but when I turn water off, it starts dripping out the bottom following all the lines

@masterofnone 3 года назад

Those connections are not repairable. Or i should say very hard to repair.

@mountainmanjim6366 3 года назад

@@masterofnone thank you for the fast reply!! I will go shop for a new faucet! Great video again! Take care

@signx 4 года назад

The problem I have is not a matter of flow, flow is fine in hot and cold water. The only problem I have is that the lever is getting extremely hard to move up and down, I tried some sprayed oil but it didn't fix it. Can this be fixed or do I have to replace the cartridge?

@masterofnone 4 года назад

You need a new cartridge

@signx 4 года назад

@@masterofnone Absolutely sure? Can't the cartridge be disassembled? And clean or something?

@masterofnone 4 года назад

@@signx yes you can do that. Get clr to soak the parts in clean and re assemble. Use plumbing grease

@spbakerchezbakethis 5 месяцев назад

Those set screw locations are a major flaw in the design of many of these faucets. So hard to get off. If you don't know what the correct size allen is, good luck!

@bobbrock4221 3 месяца назад

I have had nothing but problems with my Glacier Bay sink. It started leaking from the nozzle when I use hot water, nothing I do fixes it. I used plumbers tape and screwed the nozzle on as far as it goes, still leaked. I reached out to customer service and they sent me a part from a completely different sink. Then the sink dispenser quit working as well. I press the dispenser and 90% of the time it fails to rise back up so I can get more soap. I've never had so many problems with a single appliance in my life.

@brandonl7796 4 года назад

Mine looks just like this faucet but doesn't have that Alan screw on the back mines leaking from there

@masterofnone 4 года назад

It might be cartridge. I'll try removing it and checking all the o rings and installing it back

@brandonl7796 4 года назад

@@masterofnone I was able to just unscrew it with pliers was stuck on there pretty good. I cleaned all the crud in there and just had to tighten it better no leak at the moment

@babayagaforestdweller400 Год назад

Can I buy part at big chain hardware store

@masterofnone Год назад

Glacier bay is owned by Home Depot. They have parts for it

@barrrylincoln 4 года назад

cant understand why you have to loosen the bracket underneath.

@tatoeman2003 2 года назад

It is a 2.5 mm allen key

@kkutube1972 3 года назад

This is the worst model, I have install in around 10 homes and they leaking under a year, going back to standard 2 handle but thanks for the video. But it is the quickest to install that was the reason I bought it and it looks nice.