Easy way!! Control Multiple Servo with Raspberry Pi

Подписаться 79 тыс.

Просмотров 89 тыс.

0% 0

Raspberry Pi 4 - 4GB :: bit.ly/2YYXpum
Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685
bit.ly/2GEtIq7
Adafruit PCA9685 Python library
github.com/ada...
Adafruit 16 Channel Servo Driver with Raspberry Pi
Servo motors are often driven using the PWM outputs available on most embedded MCUs. But while the Pi does have
native HW support for PWM, there is only one PWM channel available to users at GPIO18. That kind of limits your
options if you need to drive more than one servo or if you also want to dim an LED or do some sort of other PWM
goodness as well. Thankfully ... the PI does have HW I2C available, which we can use to communicate with a PWM
driver like the PCA9685, used on Adafruit's 16-channel 12-bit PWM/Servo Driver!
Share, Support, Subscribe.!!!!!!!
Subscribe: / @makertutor101
Please Donate To Help Me Afford New Equipment And Software To Make My Videos More : goo.gl/1m8Dg2
→ Don't forget to subscribe!
🌟Love you all! 💕
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@maxinell711 2 года назад

I cannot thank you enough, this video is the only reason I was able to actually make the board work! Keep up the good work!

@mrh8095 4 года назад

Recommended power supply is 5v 2A

@Augmented_AI 3 года назад

Thank you, you helped me to solve the issue I was having :)

@pixzeto 3 года назад

Thanks, I stumbled upon the same issues and this made it super easy to go on

@alexisbontemps321 2 года назад

Hello, I have a little problem with your tutorial and know that I have an error when I run the simpletest.py program. The error is No module named Adafruit_PCA9685. PS I did exactly what you did -_-

@alexisbontemps321 2 года назад

do you have an idea i'm a taker

@mithunchandrasaha403 Год назад

Nice Explanation,Madam.Needs More.

@btsarmys4041 9 месяцев назад

Hello, thank you for this amazing tutorial. Quick question, does the servo driver need power when it is connected to Raspberry pi which already has power. i will only connect 3 motor to that.

@bernhardmair110 4 года назад

Hi, what power supply did you use for the motors? (Volt & Amp)

@pixzeto 3 года назад

I have a 5V 4A power supply connected to the PCA9685. The most important part to match is the 5V, as the current (amperes) are drawn as needed.

@kyleroesch7750 Год назад

Having an issue with the servo driver. Everything is good until I add the fifth servo. Once I do, the black diode next to the capacitor burns up. Any thoughts?

@samuelchiou5204 2 месяца назад

May I ask at <a href="#" class="seekto" data-time="54">0:54</a>, which software is that? Many Thanks!

@user-sh8ey5nk6m 10 месяцев назад

i have an error: module 'Adafruit_PCA9685' has no attribute 'PCA9685'. I don't know why. Can you have me fix this. Thank you so much

@atle8867 10 месяцев назад

i have err: module 'Adafruit_PCA9685' has no attribute 'PCA9685'. plese told me how to fix them :((. Thank you somuch

@tuckysee6574 День назад

I want to do this...to connect 30s

@seojinjeong5225 3 года назад

I made it! thanks to you!!

@onepikagaming 2 года назад

Thank you you help me to slove issue

@dilushamadhushan1941 4 года назад

What's the simulator u use this video?

@buntaku 3 месяца назад

Fritzing

@mausambahar8111 Год назад

I am driving 18 servos for a hexapod robot project using two PCA9685 by chaining 2 of them. The problem I am facing is the jitter problem. I don't have the knowledge to solve it. Please help me

@jojodasjojo 2 года назад

Does this work whith stepper motors too??? Heve a nice day!

@yhpyrl 3 года назад

Hi.. I have 8 servo Sg90. What power supply for these all servo (volt and ampere)?

@marcingodzich 3 года назад

after executing the command "python simpletest.py" I got the error "ImportError: No module named Adafruit_PCA9685". Any ideas?

@mediagramofficial5903 3 года назад

use python 2.7.. dont use thonny

@princekumar2021 Год назад

16 channel means I can connect 16 servo motors to this motor driver. right?

@fabian5391 4 года назад

which programm do u use?

@RockMore 4 года назад

Fritzing

@saikumar_26 Год назад

which software are you using for simulation

@venkatakrishnannaidukuna3155 3 года назад

Hello, Can you please explain me what are the second and the third parameters of pwm.set_pwm()

@rizkyjubair1093 2 года назад

I get this error runtimeerror : could not determine default i2c bus for platform I have enabled i2c interface, how I solve this error?

@Flofet 2 года назад

Which power supply are you using?

@kentthomas1045 3 года назад

What do you use to power your motors?

@MakerTutor101 3 года назад

External power 5v 2a

@Cluffmaster1980 3 года назад

Anyone Please help me find what software to design my projects on ? Like they use in the video to draw the pin connections. Thanks

@denon9000cd 3 года назад

Fritzing

@Cluffmaster1980 3 года назад

@@denon9000cd Thanks, just got it and its great. now i can do it on the computer instead of scraps of paper ;-)

@abu8422 Год назад

Can I also control 16 12V DC motors ??

@AxelAlthoff 4 года назад

a previous video youve posted about potentiometers controllong leds in neopixel, the linked code does not work. if you please could fixs that it would be greatly appriciated. have good day:)

@rahidislam8114 8 месяцев назад

Will this work on a raspberry pi zero?

@stanisawbiaas827 3 года назад

It would be nice to see a tutorial how to control multiple mg995 over ethenet mqtt :)

@nouranooura6529 2 года назад

how to control servo motor with keyboard righet und left, middle, with raspberry pi, do you know write cod

@ecp5758 3 года назад

Good tutorial!!

@Lets_Get_Creating Год назад

I still can't find a video that works with my board, I have the 16-Channel Servo Driver HAT for Raspberry Pi (12-bit I2C) and if anyone can help me I would greatly appreciate it (I use python code, not the terminal)

@magic4me1000 3 года назад

Can u add an esc too?!

@antitialaman7301 Год назад

I have a Raspberry Pi Zero and Phyton3 and I could not install: sudo pip3 install adafruit-circuitpython-servokit Can anyone help me, please?

@DariusRuecker 3 года назад

Can please someone give me the link for the Raspberry pi simulator that she uses in his video?

@ardabilpatra602 2 года назад

Hi can Multitasking operation? Need free rtos?

@Toni73RU 8 месяцев назад

А сколько максимум серво моторов можно подключить? И чтобы ими можно было управлять отдельно.

@javaminiatur 3 года назад

How to connect raspberry with ssc from rtrobot?

@eliotpigeon1471 4 года назад

What os is install on de rpi

@ico-theredstonesurgeon4380 4 года назад

Doesnt work with python 3..?

@onepikagaming 2 года назад

Can i get multiple servo motor code for raspberry pi ?

@resolvetube 4 года назад

Top parabéns

@hommydc2 2 года назад

Thanks!

@rbrobots6871 3 года назад

Thank you. This video was very helpful! :)

@vikohandoko6451 4 года назад

Hi sir, make multiple stepper use raspi pliss

@user-kj4tg3vr7s 3 года назад

i feel bad for the 2nd servo being slapped by the 3rd one

@karthikeyanp1491 3 года назад

Nice

@learnwithmolina1489 3 года назад

Can we make a dog form this

@eduardogomes6272 4 года назад

Could you help with ax-12a servo with arduino??

@harpermartin7813 2 года назад

Amazing video! God bless. Always remember Jesus Christ loves you!❤️🙏

@pedrotoro6754 2 года назад

El sueño de conoserte

@kavorka8855 Год назад

While this is interesting, unfortunately running servos one at a time has no real applications, unless you only have one servo to control something very simple. Have you tried to run at least 2 of them simultaneously?