Much thanks Brian!! willing to bet this is the Number 1 and about only real issue you have to make repairs on returns and such.. i had just filled to 280 bar and stored back in to drawer nearby. moments later heard a clear pop and then air leak, checked immediately didn't feel any cold and still read 280 bar was confused AF. next day went to fire and just a short air break fizzle and then dead. still 280BAR wtf 🤔. try to empty air no luck.. even more wtf. shitting a little at this point. then found the guy blowing out the pressure gauge. to fix.. was depressed at this point.. finally found this video and a pair of Circlip pliers. found the spare o ring you sold with gun. problem fixed!! F Yes!! 🎉. was amazed at how it blows apart in to nearly two perfect Orings.. i would have tried placing a second larger thinner one if you didn't specify "ONLY ONE ORING FITS HERE".. thanks again.. happy tears i fixed myself. 🐨🤓👍🏻
If this happens like it did on mine, it's a great time to install that new Raptor regulator. Super easy and it's a nice upgrade IMHO. I've got two L2's and my shots are more consistent with the raptor reg vs my stock L2.
I have Huma raptors on both my L2's and yes they are awesome, but the Huma raptor is rated for 175 bar max, I believe the REAPER is rated for higher so I never understood that part of the Raptor hype. I never pushed them over the 175 mark and yes, I've seen people push it over 200 bar but I called Huma over here in the Netherlands and they clearly said NOT to go higher then 175 bar as indicated on the website.
@@jbhk7977 I installed the raptor both on my 30 long and 22 short as well and bye bye creepy pressures. Way more consistent. Groups of 24 shots went from nickel size hole @30M to smaller than a dime @30M between regs. Plenty of power out of my 7.62 350mm behemoth with the raptor reg set at 145bar, 230 in the bottle. That's sending 44.75 Diablos 805fps. 64.41fpe or 87.33 joules. I'll grab one of my powder burners if I need any more power than that. Love these air rifles. So much fun!
Good video, easy to follow along. My problem, however must've been a little deeper than the regulator o-ring itself. Had to send it into Edgun for troubleshoot and repair. ❤ will save video and keep for future reference. Think I will upgrade to Huma air regulator with a gauge. ASAP 😊
Thanks for the great video! I am new to the Leshiy topic. I have installed a digital pressure gauge from Huma, after a shot I can see how the plenum fills again relatively quickly, but the last 10 bars or so very slowly. Any experience with this? is it normal or maybe it can be improved? I have already installed the Raptor Regulator, but it is still the same behavior.
I went out today to adjust my gun to 12 lbft as I’m in UK . After playing with fine tune. The gun just leaks air when I pull the trigger. The regulations works as I see the small gauge on the reg goes down than get back on to the adjusted pressure. Can you help me out where I need to look for the problem?
how long can you leave the tanks under high pressure - is it best to let it go near empty when done for the day, fill it up when done and check pressure every day or few days?
Hello. Maybe someone can help me. Would be very grateful. I have exactly this problem now, only that I installed the Huma Raptor Regulator. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SCwYozPCvbM.html There's a full 300 bar at the back and nothing in the plenum, no pressure. Is there such a video for the Huma Raptor regulators? 1000 thanks in advance. Best regards
