Eflite - Extra 300 1.3m - Second Thoughts 

Thanks Chris! Sounds like you're a natural!

Awesome! Thanks, and glad you're enjoying our videos. Glad you're here with us, and aspire on, but don't forget to make moves toward where you want to be...a little each day, if you can, and it's not that far off - you CAN do it!

Thanks Tyler, and good luck!

Thanks for the kind words, and I love the Petrinicic Bros too. If my Brother were into the hobby too, I'd have him doing this with me too ;)

Thanks L Man! We appreciate you buying from the links, it adds up and really help. As far as slowing down on Radio Setup, have you tried clicking the GEAR icon and playback speed to a lower speed? This might help ;) We already have near mutiny over how much we cover as it is, so we kinda gotta go fairly quick, but will go slower on some of the more beginner orientated plane, to help.

Yes Sir I have, no worries though. I get it done. 🤣😂🤣 I’ll just look through the earlier videos to find your basic setup. Then write write it down, and commit it to memory.

So how do you jailbreak your AR631??? ...my understanding is we can't change the settings!

@@BrianPhillipsRC Update the firmware, then factory reset it. That'll unlock the receiver. Set it to adjustable AS3X gains and put them on a slider so you can dial it in while flying.

Sure is!

Glad you enjoyed it!!! So many awesome planes, I don't usually pull out the "Best plane every" - I don't want the OTHER planes to get jealous ;) LOL!

She is very good with it, and we're so lucky she tolerated the demands of the work. thanks for mentioning it, and I agree whole heartedly, she deserves massive coudos!!! Thanks for the comment alec brown!

@@BrianPhillipsRC Megan is outstanding! A pleasure to watch your flying as a result.

Glad you enjoyed it! We'll try for more later too.

Good luck Luke!

That's awesome, but I bet I would have puked! I could ride roller coasters as a kid, and now, I look at them and I'm nauseous. Getting old sucks!

I hear ya, I grew up on my family’s boats for over 25 years. Never sea sick ever!! Mom And Dad would put me in the bow of our ski boat as a baby and the minute that Mercury outboard started I was out like a light! LOL, my Brothers and sister would ski like crazy and I sleepy in the bow the whole time. Dad sold the ski boat but returned to the sea (so to speak) when I was 9. We took the US Power Squadron course one winter, it was a cool father/son thing we did one winter. I learned to plot courses navigate by the stars! Very cool, however with today’s GPS that’s old technology I’ll never remember! Ho well it was fun and I was his 1st mate. Could back his 42 ft Christ Craft into its dock space without even touching a pole sometimes! I miss those days.

It really is! Love the wooden prop!

Thanks!

I never had the Sukhoi, but I heard it was amazing!

Thanks Kevin! Walking the line for worlds best audience ;)

Thanks Yme. You, have a nice day too!

I would be amazed if anything close to that size would fit. Most 3D planes fly a bit tail heavy, so you probably want to keep the battery fairly small too, so it's light on it's feet. Mark the CG at the recommended points (in the manual / video) then put your battery in... now balance the plane, or attempt to balance the plane on the marks, and each spot between the marks. When you're done flying...note if you liked the way it flew, or if you didn't. It's a highly subjective thing, especially on a 3D plane. YOU have to make the call where you want it. Some people will need it to be fairly nose heavy so the plane is pretty stable in "sport" flying (just putting around and doing some light aerobatics) while 3D pilots will want the plane to fly totally different, with a fairly tail heavy setup...this means the CG marks will stay where it is on the wing, but you'll be moving the point where the plane balances forward of those marks. CG is a basic of flight, but when you're doing 3D it's all goofy...you WANT the plane to fly kinda weird to help with some hammerhead style maneuvers...but this makes the elevator super-duper touchy...so you need to be extra skilled or use a ton of expo to help reduce porpoising of the plane.

I will do it, when they send it. We have a few planes in queue, so please understand that even if they shipped it tomorrow, we wouldn't have footage ready for a few weeks at the fastest. We don't want you to get the wrong idea; we're not ignoring your request, it just takes time for everything to happen. We have some scheduling issues to work around, namely Mother Nature, and previously recorded footage, that's ready to publish and sitting ready.

@@BrianPhillipsRC No problem Brian. I'll look forward to it!

😆😆 welcome to the club ... lol

LOL - Never say never, right???

@@BrianPhillipsRC 8 months ago I bought a plane.....now I have 9.....lol

Thanks ✌

Interesting!

It's pretty good.

LOL - Nice!!!! Glad you're here with us Randy ;) So many good choices right now, it's hard not to get excited about these sweet planes!

LOL - she sure does! I was thrilled with how easy she'll land, but it's almost TOO easy - LOL

For sure!

Thanks, but I know I need to keep working at it ;)

Nick I am I have learned from a ton Brian’s videos. I live in Western PA west of Pittsburgh and all I can say is look and meet people from the flying fields Out this way you can fly at a club three or four times as a guest then you can decide if you want to join or not.

@@roblongerman8148 thanks man I will try and get out there Sins this is a small town I wouldn’t be surprised if I already know 1 or 2 of them.

Nick - sounds like Rob might have given you some advice ;) My thing was to fly small planes at large, open spaces. It's kinda questionable. If you can get permission, or get away with it, you just need to make sure you're doing your best to follow the "Know before you fly" rules, or can get by without having issues... some areas are WAY worse than others. I used to fly in my neighborhood, but I was on our board of directors in the HOA, and we knew almost EVERYONE. It was a thing, and we were the second people on our street and the longest tenured home owners on the block, so people just kinda let us do out thing. Some were less favorable to the idea, but the rest hushed them since we had good relationships with them. We also flew out planes across the main road, about 5 minute drive to a community college with a large parking lot. Later another parking lot that was close by got adapted by an AMA flying site. This is a big challenge for a new RC pilot. Here's my take... If you can keep it below 250grams, (like some UMX planes from Horizon Hobby) then you technically are below the weight threshold for the FAA "Drone Registry" so you can fly wherever you want, essentially....but don't piss off the neighbors, since they're too dumb to know the rules. Find an AMA field if you want to pick up on tip and tricks from the locals, but buyer be ware, it's not always a warm place to be...you will find some of the best and worst of the hobby at these fields. You have to get in there and find someone who will work with you...if you don't, or they're all A-holes - leave and never come back, it will ruin the hobby for you. You gotta make sure they're going to treat you like they should - a future flyer, not a pia. I will help you, as I've done for hundreds or thousands of people like you, but I can only do so much thousands of miles away from you. Keep interested, and start thinking about your first plane. I can help you with that too. Good luck!

@@BrianPhillipsRC thank you so much man it means a lot that you would take the time to right this out for me 💪🏽❤️. What’s amazing is that having a casual convo with one of my favorite Professors at college we I found out that he is an rc hobbyists as well and he told me to call him when I wanted to go out to the field, so he can introduce me to some of his friends. And he said they have a lot of diversity from kids to people of different nationalities, witch makes me feel a lot more at ease because i mite not feel left out. He told me Tuesday’s or training days so you will find people with there high wing tundras. And get this it’s 25$ for a year worth of training every Tuesday!!!! And 50 per month to be a member with is a little high because you also need your insurance from the Association which is another 50. So I don’t know if becoming a member is viable at the moment that’s a fat 100 every month but at least there’s a place to go it’s pretty close. I didn’t even know but it was hidden in plane site just down the road from a local hobby shop called Trains and Liens.

I doubt the tail wheels will give you any issue BUT, I bet the wheel pants might. You can take all that off, if you wish.

I love the prop on this plane thought...

It's been a while, and we're about to review the V2 of the Extra 300, so can I defer till then? It'll be pretty quick, and don't want to leave you hanging...but I can't remember my experience with the Extra 300, so I'd be somewhat unfair to it, vs the very good Edge 540... Hope you understand where I'm coming from.

It's a 3D plane, but I suppose you COULD fly less aggressively. Maybe a minute better flight times? As for the location of the flight pack, I'd be 100% lying if I said I could remember - sorry!!!

true

LOL

Our pleasure! Thanks Brian! This is a very good plane, and it'll do for an intro to 3D, but I'm just not very good at 3D, full disclosure ;)

The Extra 300 is a bit "easier".

3D planes suck power if you let them? Not sure why your battery only lasted that long. We've had real good luck with the SMART packs, but since they're sometimes 2X the price of other options, a lot of people won't even try one out...but I can tell you that unless you're using them in "Battery Eaters" (Planes that kill batteries, like the Eflite F-18 80mm, for example) they will outlast most packs and give great flight times, and then you can neglect them and never discharge a single pack, EVER ;) My type of battery!

Well it depends what YOUR cruising is! That might be 2/3-3/4 throttle the whole time! Also your packs might be old?

Yes, and here's the stock reply.... P.S. April 23, 2021 - keep your eye's peeled ;) My stock reply, fyi... We have the Draco now, BUT we aren't allowed to review yet. This is not our choice. We will ABSOLUTELY BE REVIEWING IT ASAP! Please understand, our hands are tied...We can't even publish photos :(.... All I can say, is if you decide to buy anything from us in the mean time, just follow the "Master Link"...and you can navigate to whatever you decide you can't live without, or any of the other links below too. Master Link Horizon Hobby bit.ly/38ZFade Eflite A10 UMX & 64mm bit.ly/2P1i286 Apprentice 1.5m & Mini bit.ly/2OIjVHd Air Tractor 1.5m bit.ly/3tqdyHe Carbon Z Cessna 150 2.1m bit.ly/30PJkkD Carbon Z Cub SS 2.1m bit.ly/30P5mUA Carbon Cub S2 1.3m bit.ly/3bS2r3O Conscendo Evo 1.5m bit.ly/3bVtYkM Citation Longitude UMX bit.ly/30RwdQ4 Cherokee 1.3m bit.ly/3vyjdNi EC1500 1.5m bit.ly/3lmzSyw Extra 300 bit.ly/3rVnMiw F15 64mm bit.ly/30RrnlG F16 70mm bit.ly/3bUUxXv F18 80mm bit.ly/3bTssQa Fw190 1.5m bit.ly/2NswTZ2 F4U Corsair 1.2m bit.ly/30TcMX3 Habu 70mm bit.ly/38Kilv1 Vapor Night UMX bit.ly/30RbRGA Timber Turbo Night X UMX bit.ly/3cEjplB P39 1.2m bit.ly/3loUdmP P51 1.2m / 1.5m bit.ly/3bU5icI P47 1.2m bit.ly/3rYD9Xi T28 1.1m / 1.2m bit.ly/3eOh9Lk Su30 70mm bit.ly/3qUvjN5 Sport Cub S2 UMX bit.ly/3cDYUW1 Valiant 1.3m bit.ly/3rUTtsn Viper 1.1m bit.ly/3eLqcMX Twin Otter 1.2m bit.ly/2OnOuBQ Aeroscout mini & 1.1m bit.ly/30MNn1c Ultrix UMX bit.ly/3rWgPOe Ultimate 3D bit.ly/3cJ1JoT V900 bit.ly/3rVG0QZ V1200 bit.ly/3lmn8bg Maule 1.5m bit.ly/3bRAB7J Rx AR631 bit.ly/3pYNC3c AR637T bit.ly/3pW3u86 AR8360T bit.ly/3dKg4n6 AR6610T bit.ly/33SYkA0 Lem 7Ch DSMXwStab amzn.to/2GTlQze / ebay.to/2XNteGf A3L amzn.to/2nKsdxt / bit.ly/2UYmlBM FMS Fox 3m bit.ly/3mTNwcF ASW17 2.5m bit.ly/3nLuFjU Moa 1.5m bit.ly/37N9FCS PC-21 1.1m bit.ly/3bCrHKg Pitts 1.4m bit.ly/36e9ZLo F4U Corsair 1.7m bit.ly/2HV65xP Futura 80mm bit.ly/39N0khh

Soon. Here's my "Stock" reply, FYI... We have the Draco now, BUT we aren't allowed to review yet. This is not our choice. We will ABSOLUTELY BE REVIEWING IT ASAP! Please understand, our hands are tied...We can't even publish photos :(.... All I can say, is if you decide to buy anything from us in the mean time, just follow the "Master Link"...and you can navigate to whatever you decide you can't live without, or any of the other links below too. Master Link Horizon Hobby bit.ly/38ZFade Eflite A10 UMX & 64mm bit.ly/2P1i286 Apprentice 1.5m & Mini bit.ly/2OIjVHd Air Tractor 1.5m bit.ly/3tqdyHe Carbon Z Cessna 150 2.1m bit.ly/30PJkkD Carbon Z Cub SS 2.1m bit.ly/30P5mUA Carbon Cub S2 1.3m bit.ly/3bS2r3O Conscendo Evo 1.5m bit.ly/3bVtYkM Citation Longitude UMX bit.ly/30RwdQ4 Cherokee 1.3m bit.ly/3vyjdNi EC1500 1.5m bit.ly/3lmzSyw Extra 300 bit.ly/3rVnMiw F15 64mm bit.ly/30RrnlG F16 70mm bit.ly/3bUUxXv F18 80mm bit.ly/3bTssQa Fw190 1.5m bit.ly/2NswTZ2 F4U Corsair 1.2m bit.ly/30TcMX3 Habu 70mm bit.ly/38Kilv1 Vapor Night UMX bit.ly/30RbRGA Timber Turbo Night X UMX bit.ly/3cEjplB P39 1.2m bit.ly/3loUdmP P51 1.2m / 1.5m bit.ly/3bU5icI P47 1.2m bit.ly/3rYD9Xi T28 1.1m / 1.2m bit.ly/3eOh9Lk Su30 70mm bit.ly/3qUvjN5 Sport Cub S2 UMX bit.ly/3cDYUW1 Valiant 1.3m bit.ly/3rUTtsn Viper 1.1m bit.ly/3eLqcMX Twin Otter 1.2m bit.ly/2OnOuBQ Aeroscout mini & 1.1m bit.ly/30MNn1c Ultrix UMX bit.ly/3rWgPOe Ultimate 3D bit.ly/3cJ1JoT V900 bit.ly/3rVG0QZ V1200 bit.ly/3lmn8bg Maule 1.5m bit.ly/3bRAB7J Rx AR631 bit.ly/3pYNC3c AR637T bit.ly/3pW3u86 AR8360T bit.ly/3dKg4n6 AR6610T bit.ly/33SYkA0 Lem 7Ch DSMXwStab amzn.to/2GTlQze / ebay.to/2XNteGf A3L amzn.to/2nKsdxt / bit.ly/2UYmlBM FMS Fox 3m bit.ly/3mTNwcF ASW17 2.5m bit.ly/3nLuFjU Moa 1.5m bit.ly/37N9FCS PC-21 1.1m bit.ly/3bCrHKg Pitts 1.4m bit.ly/36e9ZLo F4U Corsair 1.7m bit.ly/2HV65xP Futura 80mm bit.ly/39N0khh

Thank you for thinking of us for the B25. We're very flattered that you're going out of your way to ask. We don't currently have any links with Banana Hobby, but if we get into a relationship with them, we will make sure to share this link with you Bendrix. Thanks again for thinking of this, and it really does help us!!!

@@BrianPhillipsRC you have my 100% support! Do you have an opinion of any of the Banana models? If I get one I’ll set it up with Spektrum SMART receiver, esc. I really like those flight modes.

The EC1500? I got it worked out. Not sure what you're talking about with hitting a mailbox? Were you talking to someone else???

Or make or get adapters. I don't want to chop these ends off and lose the possibility of the smart connection in the future, but I used to do that ALL the time too.

I just got this thing last week and put a few flights on it with a 3200mah smart pack. And DAMN this plane is crazy, totally gives me butterflies being a very intermediate pilot

Also just got a havoc today and im scared s#!%less to fly it tomorrow.

@@zacharynevarez2997 did them 3200 4s spektrum fit easily in the battery bay?

We aren't allowed to even post a picture until April 23rd...so at 10 AM on April 23rd... Stock reply below, in the mean time, for you Sue ;) We have the Draco now, BUT we aren't allowed to review yet. This is not our choice. We will ABSOLUTELY BE REVIEWING IT ASAP! Please understand, our hands are tied...We can't even publish photos :(.... All I can say, is if you decide to buy anything from us in the mean time, just follow the "Master Link"...and you can navigate to whatever you decide you can't live without, or any of the other links below too. Master Link Horizon Hobby bit.ly/38ZFade Eflite A10 UMX & 64mm bit.ly/2P1i286 Apprentice 1.5m & Mini bit.ly/2OIjVHd Air Tractor 1.5m bit.ly/3tqdyHe Carbon Z Cessna 150 2.1m bit.ly/30PJkkD Carbon Z Cub SS 2.1m bit.ly/30P5mUA Carbon Cub S2 1.3m bit.ly/3bS2r3O Conscendo Evo 1.5m bit.ly/3bVtYkM Citation Longitude UMX bit.ly/30RwdQ4 Cherokee 1.3m bit.ly/3vyjdNi EC1500 1.5m bit.ly/3lmzSyw Extra 300 bit.ly/3rVnMiw F15 64mm bit.ly/30RrnlG F16 70mm bit.ly/3bUUxXv F18 80mm bit.ly/3bTssQa Fw190 1.5m bit.ly/2NswTZ2 F4U Corsair 1.2m bit.ly/30TcMX3 Habu 70mm bit.ly/38Kilv1 Vapor Night UMX bit.ly/30RbRGA Timber Turbo Night X UMX bit.ly/3cEjplB P39 1.2m bit.ly/3loUdmP P51 1.2m / 1.5m bit.ly/3bU5icI P47 1.2m bit.ly/3rYD9Xi T28 1.1m / 1.2m bit.ly/3eOh9Lk Su30 70mm bit.ly/3qUvjN5 Sport Cub S2 UMX bit.ly/3cDYUW1 Valiant 1.3m bit.ly/3rUTtsn Viper 1.1m bit.ly/3eLqcMX Twin Otter 1.2m bit.ly/2OnOuBQ Aeroscout mini & 1.1m bit.ly/30MNn1c Ultrix UMX bit.ly/3rWgPOe Ultimate 3D bit.ly/3cJ1JoT V900 bit.ly/3rVG0QZ V1200 bit.ly/3lmn8bg Maule 1.5m bit.ly/3bRAB7J Rx AR631 bit.ly/3pYNC3c AR637T bit.ly/3pW3u86 AR8360T bit.ly/3dKg4n6 AR6610T bit.ly/33SYkA0 Lem 7Ch DSMXwStab amzn.to/2GTlQze / ebay.to/2XNteGf A3L amzn.to/2nKsdxt / bit.ly/2UYmlBM FMS Fox 3m bit.ly/3mTNwcF ASW17 2.5m bit.ly/3nLuFjU Moa 1.5m bit.ly/37N9FCS PC-21 1.1m bit.ly/3bCrHKg Pitts 1.4m bit.ly/36e9ZLo F4U Corsair 1.7m bit.ly/2HV65xP Futura 80mm bit.ly/39N0khh

Sweet! So cool! These new G2 packs give and give and keep giving, but honestly, the G1 Smart packs are great too ;) Thanks for being here with us VT Croshy!

Thanks 👍

I can hear your wallet cracking open from here!!!! ;)

Okay, that's a great entry level, what I would consider to be "toy grade" airplane, but this thing will still help you learn to fly. If I were you I'd either consider another "toy grade" just to mix things up with another relatively inexpensive plane, or go ahead and make the transition over toward hobby grade choices. They're more expensive, but they're a lot better flying, and you'll really start to get the hang of flying a plane the way more future planes will fly. Forgive my template reply, but it's hard to type this out more than once ;) See below and you'll see where I'm going with it. The "Way Better" list is where you want to be looking, but if your budget precludes you, the "Cheap" will get you by for a while... Here's two sets of options, Cheap (Above) and WAY Better (Below)... Cheap... (purchase links - I also have videos too, but you can just search my channel with the name and it'll come up) Sport Cub 500 amzn.to/36z22Or / bit.ly/3c3Yqqn Mini Trainstar amzn.to/2SHuzxr / bit.ly/2Xqk2Jy Micro Trainstar amzn.to/2QJtfaV / bit.ly/2JW7TUK WingDragon bit.ly/3aEwAC3 T28 bit.ly/3398xse F4U bit.ly/3h3OhNI P51 bit.ly/2JQDtDj OR WAY Better... (links for purchase AND playlists for my videos) Description - Purchase - Videos Habu STS 70mm RTF - bit.ly/38Kilv1 - ru-vid.com/group/PLXTH0DstRDc5fYbIobNAtMUz2EoT7FGLl Apprentice 1.5m RTF bit.ly/2OIjVHd - ru-vid.com/group/PLXTH0DstRDc4LA2ldEUZQMVWkJpCslxRc Carbon Cub S2 1.3m RTF bit.ly/3bS2r3O - ru-vid.com/group/PLXTH0DstRDc4Y9gQ5S22B_3SXmtqylcmM T-28 Trojan 1.1m bit.ly/3eOh9Lk - ru-vid.com/group/PLXTH0DstRDc6-_gHuXM6a1Nf_2nRxrmlc Apprentice Mini RTF bit.ly/2OIjVHd - ru-vid.com/group/PLXTH0DstRDc43Qw4KNOOfzt14n6ZBo3LS Sport Cub S2 UMX bit.ly/3cDYUW1 - ru-vid.com/group/PLXTH0DstRDc5gY8qX_x8kAJq3glGMXjDy Aeroscout 1.1m - bit.ly/30MNn1c - I haven't reviewed the 1.1m YET...but it's supposed to be REALLY GOOD With the "WAY Better", you'll be in it for more cash, but you're going to have a higher probability of success, which means you may WASTE less cash overall. When you're new, you want the BEST, which sounds kinda weird, but it's TOTALLY 100% right on - let me know in a year, if I was right ;) I only know from personal experience, and hundreds, if not thousands, of people's feedback. The "Cheap" options, are FUN and really cool too, but you'll LEARN to fly better with the "Loads Better" options. P.S. We'll be here to help you how we can ;) Good luck!!!

Interesting. This is the first I'm hearing of it. Now you have me intrigued. I just assume I'm the problem with this plane...but you're saying it isn't???

@@BrianPhillipsRC What he is saying is that the model you have is not very toned for good 3d flying i have flown most E-flight foam 3d planes and IMO they are pretty lousy at 3d i would call them sport planes at most. the Extreme Flight line of ARFs that he mentioned are much better at actual 3d flying and especially XA maneuvers. and for good reason 3d is all they do. There not a company that mass produces products such as horizon hobby. So they actually take the time to make shure there stuff flies right. And in my experience, the quality control and actual manufacturing qualities are superb and they fly absolutely amazing. If i were to recommend an airframe in the 48 or 52" range an extra, edge or the 52 slick 580 are great. However the airframes and recommended electronics are going to cost more. But the saying, you get what you pay for, definitely applies here hope this helps.

If money is no object, this would be an AMAZING choice, but if you're like most other RC enthusiast you could probably get an NX8 and do 99% of what you'll need from a transmitter over the next 5-10 years (if working within the DSMX protocol AKA Horizon Hobby gear and there are some off brand / knock off stuff in the DSM2/DSMX protocol) I want you to be satisfied, but I'm not gonna try to trick you into getting a $2000 transmitter - even though I think you'd be the envy of most RC clubs...it's just not that common. What if you buy this ix20 and then get your first plane and hate doing it, and quit? That would be crappy! My alternative recommendation would be to use your money slightly different, and consider buying a RTF (Ready to fly...comes with everything you need to get flying), then after you've established the strength of your desire to continue (Of course I think you'll be on track to insane addiction levels, like me....but some people don't' take to this hobby as feverishly as I have)....Then, you might decide to get another different RTF plane, or get a proper transmitter, like the NX8, a nice quality charger, and a few more batteries (they're pretty expensive...but good batteries will last, and they are safer), then a BNF plane...and you're STILL under the cost of the iX20 ;) My point is, I'm here to help you make the BEST choices, if you're interested in the help. What's in it for me? I get a small commission from what you buy if you follow our links, and of course, we'll get some add revenue from your watching our videos. So, I could talk you into buying a super expensive, and AWESOME iX20, that you absolutely don't need, and would be totally overwhelmed by (even if money is no object), or I could help turn you into a loyal audience member, and guide you along like so many others have done. I choose the later. I'd rather have your ear when you're ready to move from here to there, and as you have questions that come up. I'm basically your hobby shop...and I DO make some money off your decisions, but it's minuscule for the time I'll spend - I want to grow the hobby for so much more than a few bucks here and there...but want to be honest with you so you can gauge where I'm coming from. iX20 bit.ly/38XUA1I (this is crazy, but it's AWESOME....you don't need it, but if you want it, I'll be jealous of you) iX12 bit.ly/3h8yQmF (amazing, but still WAY overkill for a beginner) NX8 (this will do everything you want to do with Horizon products in the next 5-10 years) bit.ly/2PHllSs NX6 (actually 7 channels and will do 90-95% of what you'll want to do in the next 3-5 years) bit.ly/3eqEn7M There's also an NX10, but I'd SKIP that step and go up to iX12 if you're getting to that level of Transmitter. Here's a short list of beginner planes that will help you get from where you are to where you want to be. Description - Purchase - Videos Habu STS 70mm RTF - bit.ly/38Kilv1 - ru-vid.com/group/PLXTH0DstRDc5fYbIobNAtMUz2EoT7FGLl Apprentice 1.5m RTF bit.ly/2OIjVHd - ru-vid.com/group/PLXTH0DstRDc4LA2ldEUZQMVWkJpCslxRc Carbon Cub S2 1.3m RTF bit.ly/3bS2r3O - ru-vid.com/group/PLXTH0DstRDc4Y9gQ5S22B_3SXmtqylcmM T-28 Trojan 1.1m bit.ly/3eOh9Lk - ru-vid.com/group/PLXTH0DstRDc6-_gHuXM6a1Nf_2nRxrmlc Apprentice Mini RTF bit.ly/2OIjVHd - ru-vid.com/group/PLXTH0DstRDc43Qw4KNOOfzt14n6ZBo3LS Sport Cub S2 UMX bit.ly/3cDYUW1 - ru-vid.com/group/PLXTH0DstRDc5gY8qX_x8kAJq3glGMXjDy Aeroscout 1.1m - bit.ly/30MNn1c - I haven't reviewed the 1.1m YET...but it's supposed to be REALLY GOOD All good planes, but I'd put you into the Sport Cub S2 UMX, or the Apprentice 1.5m RTF to start. I've only heard the Aeroscout is one of the best, but we're still waiting on ours fro review. It's supposed to be wonderful for learning....but as mentioned above, I want to be transparent with you. Please feel free to ask away too...there's 10,000 more questions you haven't even thought to ask, and we're here to help you along. The WORST part of this hobby is the steep learning curve. We can help you, like we've helped thousands of others. We want you in the hobby, and WILL help you. Good luck!

Sure is!

Our pleasure! Thanks for watching Rob!

Humm.....thinking

@@BrianPhillipsRC LOL do it. Trust me I have lots of horizon foamies and my Pilot rc and extreme flight airplanes are just next level!! Blow ur mind

@@BrianPhillipsRC start with the extreme flight extra V2 48” or 51”

2nd'd I love my Velox 52 - You won't go back to foam except for practicing down low

@@tyrantworm yes agree, some foamies have their place but it’s crazy the flight difference in a well made balsa/carbon and covered airframe is

nope, but you can get the PNF and BNF...so if you already have Futaba, or Radiomaster (OpenTx), or Orange, or whatever, you can just get the PNF....that being said, you will have better luck with the BNF + NX6 OR NX8... Links are in the description ;)

We'll work them in. The second thoughts are so much easier to do when we have good weather, and some vacation ;)

I fly without SAFE, but AS3X is pretty much always active on BNF planes. If you get PNF, you can turn off the stabilization (AS3X). But to answer your question... I FAR prefer stabilization over not...even when not necessary.

@@BrianPhillipsRC Thank you, my Friend! I learn a lot from you 👍

Glad you enjoyed it - I still feel like I have a long ways to go with 3D flying ;)

Yep, but you can tame her with some high expo and low rates ;)

LOL - Old video - LOL ;) It's nice now...we have some footage that didn't come out until just recently, but we filmed it in a gap in HORRIFIC windy weather....this was right at the "end of winter"...now it's getting very green around here!!!

She is!

They sneek up on you FAST, but it will fly super slow!

thanks!

You can do it! Takes practice, and when you're a few mistakes high with SAFE, there's so much less risk...but even with SAFE, you gotta make sure you don't end up throwing the motor in Reverse, and freaking out to get to all the switches when and if you have an issue...SAFE won't fix that, so might want to think about making the motor only go forward when in SAFE - just a tip. I need to set this up too.

sure does!

LOL - depends on who you ask - LOL ;)

@@BrianPhillipsRC 🤣😅

LOL - thanks Clay!

No mics on this one, sorry! It was a rush job ;) This was a special situation....we try NOT to do this much anymore.

UUUUUUUGE

LOL!!!!

Cool, thanks!!!